Multiquip Landscape Lighting BGMP User Manual

OPERATION AND PARTS MANUAL  
GLOBUG SERIES  
MODELS:  
GBW/GBWE (Pentapod With Lamp)  
GBS (Offset Pole With Lamp  
GBP (Lamp Only)  
GBHM (Hitch Mount Accessory)  
GBMP (Mounting Plate)  
ORIGINAL COPY  
Revision #0 (07/23/09)  
To find the latest revision of this  
publication, visit our website at:  
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROPOSITION 65 WARNING  
PAGE 2 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Suggested Spare Parts ......................................... 35  
Component Drawings  
GBW/GBWE/GBS/GBP/  
GBHM/GBMP  
Nameplates And Decals (GBW/GBWE)........... 36-37  
Nameplates And Decals (GBS)........................ 38-39  
Balloon And Lamp Assy (GBW/GBWE/GBS)... 40-41  
Mast Assy (GBW/GBWE)................................. 42-43  
Pentapod Assy (GBW/GBWE).......................... 44-45  
Pole Assy (GBS)............................................... 46-47  
Hitch Mount Assy (GBHM) ............................... 48-49  
Plate Mount Assy (GBMP)................................ 50-51  
Lighting System  
Proposition 65 Warning ........................................... 2  
Table Of Contents.................................................... 3  
Parts Ordering Procedures...................................... 4  
Specifications ........................................................ 10  
Dimensions (GBW/GBWE).................................... 11  
Dimensions (GBS)................................................. 12  
Dimensions (GBP)................................................. 13  
Footcandle Plot...................................................... 14  
General Information............................................... 15  
Components ..................................................... 16-17  
Setup ................................................................ 18-22  
Operation.......................................................... 23-25  
Maintenance..................................................... 26-31  
Wiring Diagram...................................................... 32  
Explanation Of Code In Remarks Column............. 34  
Terms And Conditions Of Sale — Parts ................ 52  
NOTICE  
Specifications and part numbers are subject to change  
without notice.  
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS ORDERING PROCEDURES  
Ordering parts has never been easier!  
Choose from three easy options:  
Effective:  
January 1st, 2006  
Best Deal!  
Order via Internet (Dealers Only):  
Order parts on-line using Multiquip’s SmartEquip website!  
If you have an MQ Account, to obtain a Username  
and Password, E-mail us at: parts@multiquip.  
com.  
View Parts Diagrams  
Order Parts  
Print Specification Information  
To obtain an MQ Account, contact your  
District Sales Manager for more information.  
Use the internet and qualify for a 5% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
to log in and save!  
Order Parts  
Note: Discounts Are Subject To Change  
Fax your order in and qualify for a 2% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Order via Fax (Dealers Only):  
All customers are welcome to order parts via Fax.  
Domestic (US) Customers dial:  
1-800-6-PARTS-7 (800-672-7877)  
Note: Discounts Are Subject To Change  
Domestic (US) Dealers Call:  
Order via Phone:  
1-800-427-1244  
Non-Dealer Customers:  
International Customers should contact  
their local Multiquip Representatives for  
Parts Ordering information.  
Contact your local Multiquip Dealer for  
parts or call 800-427-1244 for help in  
locating a dealer near you.  
When ordering parts, please supply:  
Dealer Account Number  
Specify Preferred Method of Shipment:  
Dealer Name and Address  
UPS/Fed Ex  
DHL  
Truck  
Priority One  
Ground  
Shipping Address (if different than billing address)  
Return Fax Number  
Next Day  
Second/Third Day  
Applicable Model Number  
Quantity, Part Number and Description of Each Part  
NOTICE  
All orders are treated as Standard Orders and will  
ship the same day if received prior to 3PM PST.  
WE ACCEPT ALL MAJOR CREDIT CARDS!  
PAGE 4 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
Do not operate or service the equipment before reading  
the entire manual. Safety precautions should be followed  
at all times when operating this equipment.  
Failure to read and understand the safety  
messages and operating instructions could  
result in injury to yourself and others.  
Potential hazards associated with the operation of this  
equipment will be referenced with hazard symbols which  
may appear throughout this manual in conjunction with  
safety messages.  
SAFETY MESSAGES  
The four safety messages shown below will inform you  
about potential hazards that could injure you or others.The  
safety messages specifically address the level of exposure  
to the operator and are preceded by one of four words:  
DANGER, WARNING, CAUTION or NOTICE.  
SAFETY SYMBOLS  
DANGER  
Indicates a hazardous situation which, if not avoided,  
WILL result in DEATH or SERIOUS INJURY.  
WARNING  
Indicates a hazardous situation which, if not avoided,  
COULD result in DEATH or SERIOUS INJURY.  
CAUTION  
Indicates a hazardous situation which, if not avoided,  
COULD result in MINOR or MODERATE INJURY.  
NOTICE  
Addresses practices not related to personal injury.  
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
GENERAL SAFETY  
CAUTION  
NOTICE  
This equipment should only be operated by trained and  
qualified personnel 18 years of age and older.  
NEVER operate this equipment without proper protective  
clothing, shatterproof glasses, respiratory protection,  
hearing protection, steel-toed boots and other protective  
devices required by the job or city and state regulations.  
Whenever necessary, replace nameplate, operation and  
safety decals when they become difficult read.  
Manufacturer does not assume responsibility for any  
accident due to equipment modifications. Unauthorized  
equipment modification will void all warranties.  
NEVER use accessories or attachments that are not  
recommended by Multiquip for this equipment. Damage  
to the equipment and/or injury to user may result.  
NEVER operate this equipment when not  
feeling well due to fatigue, illness or when  
under medication.  
NEVER operate this equipment under the influence of  
drugs or alcohol.  
ALWAYS know the location of the nearest  
fire extinguisher.  
ALWAYS know the location of the nearest  
first aid kit.  
ALWAYS know the location of the nearest phone or keep  
a phone on the job site. Also, know the phone numbers  
of the nearest ambulance, doctor and fire department.  
This information will be invaluable in the case of an  
emergency.  
ALWAYS check the equipment for loosened threads or  
bolts before starting.  
DO NOT use the equipment for any purpose other than  
its intended purposes or applications.  
PAGE 6 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
LIGHTING SYSTEM SAFETY  
DANGER  
LAMP SAFETY  
WARNING  
NEVER use lighting system in rain, snow or  
areas of high humidity that could generate  
electrical storms.  
NEVER attempt to replace lamp with the power on.  
Always unplug the power cord from the generator or  
power source when changing the lamp.  
ALWAYSallowasufficientamountoftimeforthelamptocool  
before changing.The possibility exists of severe burns.  
WARNING  
NEVER disconnect any emergency or safety devices.  
These devices are intended for operator safety.  
Disconnection of these devices can cause severe injury,  
bodily harm or even death. Disconnection of any of  
these devices will void all warranties.  
CAUTION  
NEVER use force when installing the lamp.Excessive force  
could cause the lamp to break, causing bodily harm.  
NOTICE  
CAUTION  
NEVER leave any grease or oil residue on lamp surface  
when replacing or removing lamp. This can create hot  
spots, reducing the service life of the lamp.  
NEVER attempt service on a running machine.  
NOTICE  
ALWAYS make sure lamp surface is clean and dry.  
To prevent the lighting system from overturning, NEVER  
use in winds that exceed 22 mph (10 m/s).  
ALWAYS replace with MQ recommended type lamp.See  
parts section of this manual.  
The lighting system should only be used in temperatures  
between 23° to 104°F (-5° to 40° C). Failure to comply  
with these operating parameters could cause the lamp  
to malfunction and shorten the ballast life.  
If applicable, ALWAYS make sure the lamp guard is  
installed correctly. NEVER deform the lamp guard.  
NEVER unplug the lamp’s AC power cable during  
operation.  
ALWAYS keep the lighting system in proper running  
condition.  
ALWAYS have a trained technician to install and  
remove lamp or replace any damaged fixture wiring.  
Fix damage to lighting system and replace any broken  
parts immediately.  
ALWAYS store equipment properly when it is not being  
used.Equipment should be stored in a clean, dry location  
out of the reach of children and unauthorized personnel.  
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
BALLOON SAFETY  
WARNING  
ELECTRICAL SAFETY  
DANGER  
To prevent serious burns, NEVER touch  
or unzip the balloon envelope when the  
lamp is on.  
Lighting system is equipped with a ground pin on the  
power plug. For your protection, ALWAYS complete the  
grounding path. NEVER insert the AC power plug into a  
2-prong receptacle to operate lighting system.  
CAUTION  
When applying power to the lighting system, ALWAYS  
connect the AC power plug to a 3-prong receptacle that  
is grounded. The possibility exists of electrical shock,  
electrocution and even death if the lighting system is  
not grounded.  
ALWAYS keep the balloon away from sharp objects and  
excessive amounts of heat.  
NOTICE  
To prevent balloon deformation, NEVER use lighting  
system in strong winds.  
NEVER operate lighting system or  
handle any electrical equipment while  
standing in water, while barefoot, while  
handsarewetorintherain.Adangerous  
electrical shock could occur, causing  
severe bodily harm or even death.  
DO NOT place the balloon inside its protective cover  
until the lamp has had a sufficient amount of time to cool  
down. This will prevent the balloon’s nylon cover from  
being burned (touching the lamp surface).  
ALWAYS place the balloon inside its protective cover  
after each use. This will prolong the life of the balloon  
material, keeping it protected from harsh environmental  
elements.  
ALWAYS make sure the area above  
the lighting system is open and clear  
of overhead power lines and other  
obstructions. Contact with overhead  
power lines or other obstructions could  
result in equipment damage, electrical  
shock, electrocution and even death.  
Replace balloon immediately if damaged. A damaged  
balloon will not inflate properly, and may become more  
damaged by touching the hot lamp surface.  
Power Cord/Cable Safety  
DO NOT use excessive force when zipping and unzipping  
the balloon. Be gentle with the zipper mechanism. If the  
zipper is broken, the balloon will become unusable.  
DANGER  
NEVER let power cords or cables lay in water.  
GENERATOR SAFETY  
NEVER use damaged or worn cables or cords. Inspect  
for cuts in the insulation  
If using a generator to power lighting system,  
refer to applicable generator manual safety  
information section.  
NEVER grab or touch a live power  
cord or cable with wet hands. The  
possibility exists of electrical shock,  
electrocution or death.  
Make sure power cables are securely connected.  
Incorrect connections may cause electrical shock and  
damage to the lighting system.  
NOTICE  
ALWAYS make certain that proper power or extension  
cord has been selected for the job. See Cable Selection  
Chart in this manual.  
PAGE 8 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
LOADING AND UNLOADING  
Cart Type - With Lifiting Hook  
Cart Type - No Lifiting Hook  
If lighting system is not equipped with a transport lifting  
hook and the mast is removable, refer to the following  
safety information.  
If lighting system is equipped with a transport lifting hook,  
refer to the following safety information.  
Before lifting, make sure that the mast and lamp are  
removed as described in the manual.  
CAUTION  
Before lifting, make sure that lighting system parts are  
not damaged and screws are not loosened or lost.  
The cart can be safely lifted by two persons to the  
transport vehicle.  
ALWAYS make sure crane or lifting device has been  
properly secured to lifting hook of the equipment.  
TRANSPORTING SAFETY  
NOTICE  
NEVER lift the equipment while lighting system is  
running.  
When transporting the lighting system, if applicable,  
always place in stow position and place mast in its  
carrying case.  
Make sure the mast is completely lowered before lifting  
the lighting system.  
ALWAYS remove balloon/lamp assembly from the mast  
when transporting lighting system. This will prevent  
damage to the bulb due to vibration.  
Use adequate lifting cable (wire or rope) of sufficient  
strength.  
Use one point suspension hook and lift straight upwards.  
NEVER leave the balloon/lamp exposed during transport.  
Exposure to excess wind or rain could damage the  
balloon’s nylon cover.  
ALWAYS place balloon inside its protective cover during  
transport.Be sure the cover is secured tightly around the  
balloon/lamp assembly.  
Never allow any person or animal to stand underneath the  
equipment while lifting.  
DO NOT lift machine to unnecessary heights.  
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Table 1. Specifications  
Model  
GBW/GBWE/GBS/GBP  
Input Voltage  
120 VAC  
9.3 A @ 120 V  
Max. Current  
Frequency  
50-60 Hz Single-Phase  
1700 Watts  
Appropriate Generator  
Lamp  
Lamp Type  
1,000 Watt Metal Halide  
107,000 lm  
Total Luminous Flux  
Standard Balloon Diameter  
Light Coverage (360°)  
47.2 in (1200 mm)  
90 ft (27.4 meters)  
476.6° F (247° C) max  
417.2° F (214° C) max  
Lamp Surface Temperature (Longitudinal)  
Lamp Surface Temperature (Transversal)  
Dimensions (L x W x H)  
Storage (Lamp)  
8.7x 8.7 x 40 in  
(700 x 1,023 x 1,212 mm)  
BALLOON  
47.2 x 47.2 x 28.3 in.  
(1200 x 1200 x 720 mm)  
Balloon Dimensions (L x W x H)  
Balloon Material  
Polyester  
Balloon Heat-Resisting Temperature  
Internal Balloon Temperature  
Balloon Water Resistance  
FAN MOTOR  
320-356° F (160-180° C)  
126° F (52° C)  
1,500 mm H O  
2
Fan Motor Voltage  
100 VAC  
0.45/0.55 A  
Fan Motor Current  
Fan Motor Pressure  
.347/.372 kPA (.050/.054 psi)  
PENTAPOD (GBW/GBWE only)  
Outriggers  
5
Mast - Number of Stages  
3 (air shock absorbers)  
GBW Dimensions (L x W x H)  
Upper Working Position  
64.6 x 67.9 x 107 to 158.3 in  
(1,640 x 1,725 x 2,720 to 4,020 mm)  
GBWE Dimensions (L x W x H)  
Upper Working Position  
64.6 x 67.9 x 107 to 193.3 in  
(1,640 x 1,725 x 2,720 to 4,910 mm)  
Dimensions (L x W x H)  
Storage (Pentapod)  
7.9 x 8.7 x 28.3 in  
(200 x 220 x 720 mm)  
Weight  
56 lb (25.6 kg)  
OFFSET POLE (GBS Only)  
Mast - Number of Stages  
2 stages (offset and straight pole)  
Dimensions (L x W x H)  
Upper Working Position  
47.2 x 49.6 x 99 in  
(1,200 x 1,260 x 2,515 mm)  
Dimensions (L x W x H)  
Storage  
Straight Pole: 35 in (890 mm)  
Offset Pole: 26.9 x 16.7 x 2 in (683 x 425 x 52 mm)  
Weight  
34 lb (15.4 kg)  
PAGE 10 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIMENSIONS (GBW/GBWE)  
D
B
A
C
E
Figure 1. GBW/GBWE Dimensions  
Table 2. GBW Dimensions  
Description  
Reference Letter  
Dimension inches (mm)  
158.3 (4,020)  
193.3 (4,910)  
28.3 (720)  
A (GBW)  
Total Max. Height (with Standard Balloon)  
Total Max. Height (with Standard Balloon)  
Standard Balloon Height  
A (GBWE)  
B
C
D
E
Mast Height (without Balloon)  
Standard Balloon Diameter  
130 (3,302)  
47.2 (1,200)  
Mast Height (Stowed)  
28.3 (720)  
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIMENSIONS (GBS)  
B
F
D
C
GB36 BALLOON  
SHOWN  
G
OFFSET POLE  
I
E
H
J
A
Table 3. GBS Dimensions  
STRAIGHT POLE  
Reference Letter  
Dimension inches (mm)  
44.68 (1,135)  
35.43 (900)  
A
B
C
D
E
F
G
H
I
K
33.46 (850)  
38.38 (975)  
85.62 (2,175)  
26.88 (683)  
16.73 (425)  
39.37 (1,000)  
8.66 (220)  
J
7.87 (200)  
BALLOON  
K
28.34 (720)  
ASSEMBLY  
Figure 2. GBS Dimensions  
PAGE 12 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIMENSIONS (GBP)  
A
B
Figure 3. GBP Dimensions  
Table 4. GBP Dimensions  
Reference Letter  
Dimension inches (mm)  
A
B
35.43 (900)  
33.46 (850)  
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOOTCANDLE PLOT  
.25  
.5  
1
2
5
10  
VALUES LISTED AS FOOTCANDLES  
SCALE: 1 GRID = 50 FT. (15.24 METERS)  
Figure 4. Illumination Range  
PAGE 14 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL INFORMATION  
The Multiquip GloBug GBW/GBWE, GBS, GBP are  
general- purpose, portable, glare-free lighting systems  
intended for emergency and remote lighting needs. It is  
universally adaptable to all AC power supplies and accepts  
50/60 Hz, 100-240 V.  
The GBW/GBWE has a three-stage mast that extends to a  
height of up to 13 feet and 2 inches.The GBW/GBWE has  
five outriggers (pentapod) for great stabilization.  
The GBS is designed to be attached to an external piece of  
equipment such as a paver.The system is easy to assemble  
and includes poles and mounting brackets.  
The GBP (also included with the GBW/GBWE and GBS)  
provides 360° glarefree illumination. The balloon is self-  
inflating and easy to install and inflate in less than 20  
seconds. It uses a single 1,000 watt lamp with pure white  
light for maximum illumination with a light coverage of up  
to 150 feet. The balloon is self-inflating and easy to install  
and inflate in less than 20 seconds.  
The GBHM Hitch Mount can be used to attach a GBP to  
a hitch on a truck.  
The GBMP Plate Mount can be used to attach a GBP to  
a trailer.  
If an extension cord is necessary to connect to a power  
source, refer to Table 5 to select the proper length.  
Table 5. Extension Cord Gauge Selection  
Volts  
Length of Cord in Feet  
Ampere  
Rating 115V  
Range  
25 Ft.  
50 Ft.  
18  
50 Ft.  
100 Ft. 150 Ft. 200 Ft. 250 Ft. 300 Ft. 400 Ft. 500 Ft.  
230V  
0 - 2  
100 Ft. 200 Ft. 300 Ft. 400 Ft. 500 Ft. 600 Ft. 800 Ft. 1000 Ft.  
18  
18  
18  
18  
16  
16  
14  
14  
12  
12  
12  
12  
18  
16  
16  
14  
14  
12  
12  
10  
10  
10  
8
16  
14  
14  
12  
12  
10  
10  
8
16  
14  
12  
12  
10  
10  
8
14  
12  
12  
10  
10  
8
14  
12  
10  
10  
8
12  
10  
10  
8
12  
10  
8
2 - 3  
3 - 4  
4 - 5  
5 - 6  
6 - 8  
8 - 10  
18  
18  
18  
8
18  
8
6
18  
6
6
6
18  
8
6
6
4
10 - 12  
12 - 14  
14 - 16  
16 - 18  
18 - 20  
16  
8
6
6
4
4
16  
8
6
6
6
4
2
16  
8
6
6
4
4
2
14  
8
6
4
4
2
2
14  
8
6
6
4
4
2
2
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENTS  
GBP  
1
13  
12  
2
3
4
19  
18  
14  
20  
11  
10  
5
17  
16  
9
8
15  
7
6
GBW/GBWE  
21  
22  
28  
27  
25  
26  
23  
24  
GBHM  
GBMP  
5
GBWE/GBHM/  
GBMP ONLY  
GBS  
Figure 5. GBW/GBWE/GBS/GBP Components  
PAGE 16 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENTS  
Figure 5 shows the location of the controls and components  
for the GBW Lighting System.The functions of each control  
is described below:  
14. Lamp Holder — Holds lamp in place.Lamp is screwed  
into socket.  
15. Balloon Connector — Connect this connector to the  
AC power cable connector.  
1. Balloon Cover — Stores balloon when GBW is not in  
use. Allow a sufficient amount of time for the lamp to  
cool down before storing balloon. Possibility exists of  
balloon getting burned.  
16. Lamp/Balloon Bolt — Used to tighten mast when  
attached to the lamp/balloon assembly.  
17. Fan Motor (Blower) — Inflates the balloon as soon  
as power is applied.  
2. Balloon — Made of heat resistant polyester, with a  
diameter of 47.2 inches (1,200 mm). Balloon is self-  
inflating and inflates in less than 20 seconds.  
18. Lamp — 1000 watt metal halide bulb with pure white  
light for maximum illumination.  
3. Velcro — Used to easily attach optional message strip  
to the balloon.  
19. Lamp Guard — Protects the lamp from being hit by  
objects and the balloon from touching the lamp.  
4. Buckle — Used to hold the balloon together when  
storing inside the cover.  
20. Carrying Case — Use this case to store the pentapod  
when transporting or when not in use.  
5. AC Power Cable — Connects to the AC power source  
(generator) on one end and to the lamp connector on  
the other end with quick-disconnect connector.  
21. Offset Pole — Supports lamp assembly when attached  
to the straight pole.  
22. Knob — Secures the offset pole to the straight pole  
when tightened.  
6. Pentapod — Supports and holds up the GBW.  
7. Locking Clamps To secure the generator to the cart  
platform, place clamps around the pipe frame of the  
generator. Tighten securely to prevent movement.  
23. Straight Pole — Used in conjunction with the offset  
pole to support the lamp assembly.  
24. Clamps — Used to attach the straight pole to an  
external support. These clamps must be tightened  
securely to prevent the light assembly from falling off.  
8. Stay — Supports the mast against the pentapod.  
9. Mast — This mast is comprised of three separate  
stages. The mast can be raised in excess of 8 feet  
(without balloon). When raising the mast, always be  
on the lookout for overhead obstructions.  
25. Extension Pole — Extends mast height by 40 inches  
(GBWE). For GBHM and GBMP, 2 poles are included  
to support the desired balloon assembly.  
10. Mast Bolt — Loosen to raise mast and tighten to keep  
the mast in place when raised to the desired height.  
26. Hitch Mount Assembly — Used to attach balloon  
assembly to a hitch on a truck or similar vehicle.  
11. AC Power Cable Connector — Connect this quick-  
disconnect plug to the balloon connector.  
27. Plate Mount Assembly — Used to attach balloon  
assembly to a trailer or similar vehicle.  
12. Message Strip (OPTIONAL) — a 12 x 43 inch message  
strip (GBBALD1) may be attached to the balloon. The  
message strip can be purchased separately.  
28. Plate — Attaches directly to a trailer to hold plate  
mount assembly.  
13. Zipper — Zips up balloon to completely close it when  
lamp is in place.  
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 17  
Download from Www.Somanuals.com. All Manuals Search And Download.