Multiquip Automobile Parts EM 70P User Manual

PARTS MANUAL  
SERIES  
MODELS  
EM-70S (STEEL)  
EM-70P (PLASTIC)  
PLASTER AND MORTAR MIXER  
(GASOLINE ENGINE/ELECTRIC MOTOR)  
Revision #8 (03/19/10)  
To find the latest revision of this  
publication, visit our website at:  
www.multiquip.com  
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROPOSITION 65WARNING  
Engine exhaust and some of  
its constituents,and some dust created  
by power sanding, sawing, grinding,  
drillingandotherconstructionactivities  
contains chemicals known to the State  
of California to cause cancer, birth  
defects and other reproductive harm.  
Someexamplesofthesechemicalsare:  
Leadfromlead-basedpaints.  
Crystallinesilicafrombricks.  
Cementandothermasonryproducts.  
Arsenicandchromiumfromchemically  
treatedlumber.  
Your risk from these exposures varies,  
dependingonhowoftenyoudothistype  
of work. To reduce your exposure to  
these chemicals: ALWAYS work in a  
well ventilated area, and work with  
approved safety equipment, such as  
dust masks that are specially designed  
to filter out microscopic particles.  
PAGE 2 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10) — PAGE 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P PLASTER/MORTAR MIXER TABLE OF CONTENTS  
MQ-ESSICK — EM-70S/P  
Plaster/Mortar Mixer  
Proposition 65 Warning ............................................ 2  
Table Of Contents .................................................... 4  
Parts Ordering Procedures ...................................... 5  
Explanation of Code In Remarks Column................ 6  
Suggested Spare Parts ............................................ 7  
HONDA GX160K1HX2 ENGINE  
Air Cleaner Assy............................................... 30-31  
Camshaft Assy. ................................................ 32-33  
Carburetor Assy. .............................................. 34-35  
Control Assy. .................................................... 36-37  
Crankcase Cover Assy. .................................... 38-39  
Crankshaft Assy. .............................................. 40-41  
Cylinder Barrel Assy. ........................................ 42-43  
Cylinder Head Assy. ......................................... 44-45  
Fan Cover Assy. ............................................... 46-47  
Flywheel Assy................................................... 48-49  
Fuel Tank Asssembly ....................................... 50-51  
Ignition Coil Asssembly .................................... 52-53  
Muffler Asssembly............................................ 54-55  
Piston Rings Asssembly................................... 56-57  
Recoil Starter Asssembly................................. 58-59  
1/6 Gear Reduction Asssembly ....................... 60-61  
Labels Asssembly ............................................ 62-63  
Component Drawings  
Nameplate and Decals..........................................8-9  
Frame Assembly ...............................................10-11  
Paddle Shaft Assembly .....................................12-13  
Steel Drum Assembly........................................14-15  
Plastic Drum Assembly .....................................16-17  
Drum & Paddle Shaft Complete Assy. (Poly).....18-19  
Drum & Paddle Shaft Complete Assy. (Steel) ...20-21  
Axle Assembly ...................................................22-23  
Engine Assembly ..............................................24-25  
Electric Motor Assembly....................................26-27  
Cabinet Assembly .............................................28-29  
HONDA GX240K1HA2 ENGINE  
Air Cleaner Assembly........................................64-65  
Camshaft Assembly ..........................................66-67  
Carburetor Assembly ........................................68-69  
Control Assembly ..............................................70-71  
Crankcase Cover Assembly..............................72-73  
Crankshaft Assembly ........................................74-75  
Cylinder Barrel Assembly..................................76-77  
Cylinder Head Assembly...................................78-79  
Fan Cover Assembly .........................................80-81  
Flywheel Assembly ...........................................82-83  
Muffler Assembly ..............................................84-85  
Fuel Tank Assembly ..........................................86-87  
Ignition Coil .......................................................88-89  
Piston Assembly................................................90-91  
Recoil Starter ....................................................92-93  
Gear Reduction Assembly ................................94-95  
Label Assembly.................................................96-97  
Specifications and are  
subject to change  
without notice.  
Terms and Conditions of Sale ................................ 98  
PAGE 4 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS ORDERING PROCEDURES  
Ordering parts has never been easier!  
Choose from three easy options:  
Effective:  
January 1st, 2006  
Best Deal!  
Order via Internet (Dealers Only):  
Order parts on-line using Multiquip’s SmartEquip website!  
If you have an MQ Account, to obtain a Username  
and Password, E-mail us at: parts@multiquip.  
com.  
N View Parts Diagrams  
N Order Parts  
N Print Specification Information  
To obtain an MQ Account, contact your  
District Sales Manager for more information.  
Use the internet and qualify for a 5% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Goto www.multiquip.com and click on  
to log in and save!  
Order Parts  
Note: Discounts Are Subject To Change  
Fax your order in and qualify for a 2% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Order via Fax (Dealers Only):  
All customers are welcome to order parts via Fax.  
Domestic (US) Customers dial:  
1-800-6-PARTS-7 (800-672-7877)  
Note: Discounts Are Subject To Change  
Domestic (US) Dealers Call:  
Order via Phone:  
1-800-427-1244  
Non-Dealer Customers:  
International Customers should contact  
their local Multiquip Representatives for  
Parts Ordering information.  
Contact your local Multiquip Dealer for  
parts or call 800-427-1244 for help in  
locating a dealer near you.  
When ordering parts, please supply:  
R
Dealer Account Number  
R
Specify Preferred Method of Shipment:  
R
R
R
R
R
Dealer Name and Address  
UPS/Fed Ex  
DHL  
Truck  
N
N
Priority One  
Ground  
Shipping Address (if different than billing address)  
Return Fax Number  
N Next Day  
Second/Third Day  
Applicable Model Number  
N
Quantity, Part Number and Description of Each Part  
NOTICE  
All orders are treated as Standard Orders and will  
ship the same day if received prior to 3PM PST.  
WE ACCEPT ALL MAJOR CREDIT CARDS!  
EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10) — PAGE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLANATION OF CODE IN REMARKS COLUMN  
The following section explains the different symbols and  
QTY. Column  
remarks used in the Parts section of this manual. Use the  
help numbers found on the back page of the manual if there  
are any questions.  
Numbers Used — Item quantity can be indicated by a  
number, a blank entry, or A/R.  
A/R (As Required) is generally used for hoses or other  
parts that are sold in bulk and cut to length.  
NOTICE  
The contents and part numbers listed in the parts  
section are subject to change without notice.Multiquip  
does not guarantee the availability of the parts listed.  
A blank entry generally indicates that the item is not sold  
separately.Other entries will be clarified in theRemarks”  
Column.  
SAMPLE PARTS LIST  
REMARKS Column  
NO. PART NO. PART NAME  
QTY. REMARKS  
Some of the most common notes found in the “Remarks”  
Column are listed below. Other additional notes needed  
to describe the item can also be shown.  
1
2%  
12345  
BOLT......................1 .....INCLUDES ITEMS W/%  
WASHER, 1/4 IN............NOT SOLD SEPARATELY  
WASHER, 3/8 IN....1 .....MQ-45T ONLY  
2% 12347  
3
4
12348  
12349  
HOSE ..................A/R ...MAKE LOCALLY  
BEARING ..............1 .....S/N 2345B AND ABOVE  
Assembly/Kit — All items on the parts list with the  
same unique symbol will be included when this item is  
purchased.  
NO. Column  
Indicated by:  
Unique Symbols — All items with same unique  
symbol  
“INCLUDES ITEMS W/(unique symbol)”  
(@, #, +, %, or >) in the number column belong to the  
same assembly or kit, which is indicated by a note in the  
“Remarks” column.  
Serial Number Break — Used to list an effective serial  
number range where a particular part is used.  
Indicated by:  
Duplicate Item Numbers — Duplicate numbers indicate  
multiple part numbers, which are in effect for the same  
general item, such as different size saw blade guards in  
use or a part that has been updated on newer versions  
of the same machine.  
“S/N XXXXX AND BELOW”  
“S/N XXXX AND ABOVE”  
“S/N XXXX TO S/N XXX”  
Specific Model Number Use — Indicates that the part  
is used only with the specific model number or model  
number variant listed. It can also be used to show a  
part is NOT used on a specific model or model number  
variant.  
NOTICE  
When ordering a part that has more than one item  
number listed, check the remarks column for help in  
determining the proper part to order.  
Indicated by:  
“XXXXX ONLY”  
“NOT USED ON XXXX”  
PART NO. Column  
Numbers Used — Part numbers can be indicated by a  
number, a blank entry, or TBD.  
“Make/Obtain Locally” — Indicates that the part can  
be purchased at any hardware shop or made out of  
available items.Examples include battery cables, shims,  
and certain washers and nuts.  
TBD (To Be Determined) is generally used to show a  
part that has not been assigned a formal part number  
at the time of publication.  
“Not Sold Separately— Indicates that an item cannot  
be purchased as a separate item and is either part of an  
assembly/kit that can be purchased, or is not available  
for sale through Multiquip.  
A blank entry generally indicates that the item is not sold  
separately or is not sold by Multiquip. Other entries will  
be clarified in the “Remarks” Column.  
PAGE 6 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P MIXER— SUGGESTED SPARE PARTS  
EM-70P/S PLASTER AND MORTAR MIXER 1 TO 3  
UNITSWITH HONDA GX160K1HX2 AND GX240K1HA2  
ENGINES  
Part numbers on this  
Suggested Spare Parts List  
may supercede/replace the P/  
N's shown in the test pages of  
this manual.  
NOTE  
Qty.... P/N ...................... Description  
6 ....... 508473 ................ V-BELT A37 HONDA ENGINE, 5.0 HP  
6 ....... 505834 ................ V-BELT A36 HONDA ENGINE, 8.0 HP  
6 ....... 491112 ................ V-BELT A40 ELECTRIC MOTOR  
2 ....... EM914288 ........... OIL SEAL, AXLE  
4 ....... EM903113 ........... BEARING, CONE, AXLE  
4 ....... EM903112 ........... BEARING, CUP, AXLE  
4 ....... 507844 ................ SPRING COMPRESSION  
4 ....... EM200285 ........... GLAND, PACKING HALF  
12 ..... EM200301 ........... RING, SHAFT PACKING  
4 ....... 505065 ................ CARRIAGE BOLT 3/8" NC X 3" (STEEL)  
3 ....... 17210ZE2515 ...... ELEMENT, AIR CLEANER  
3 ....... 9807956846......... SPARK PLUG  
1 ....... 28462ZE2W11..... ROPE, RECOIL STARTER  
1 ....... 17620ZH7023...... CAP, FUEL TANK  
2 ....... EM203010 ........... KIT, WIPER BLADES (STEEL DRUM)  
2 ....... EM204624 ........... KIT, WIPER BLADES (PLASTIC DRUM)  
EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10) — PAGE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P MIXER— NAMEPLATE AND DECALS  
NAMEPLATE AND DECALS  
PAGE 8 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P MIXER— NAMEPLATE AND DECALS  
NAMEPLATE AND DECALS  
NO  
1
2
3
4
5
6
7
9
PART NO  
DCL151  
EM948630  
CIPDCL160  
EM510891  
948501  
35137  
EM510883  
513479  
DCL335  
DCL280  
513522  
13118  
948121  
PART NAME  
DECAL, TOWING INSTRUCTIONS  
DECAL, PUSH TO STOP  
DECAL, CRUSHWARNING  
DECAL, ESSICK LOGO (SMALL)  
DECAL, SAFETY INSTRUCTIONS  
DECAL, WARNING READ  
DECAL, ESSICK LOGO (LARGE)  
DECAL, WARNING SAFETY GRATE  
DECAL, CRUSH WARNING SAFETY GRATE  
DECAL, WARNING DUMP HANDLE  
DECAL, DRUM LOCK  
QTY.  
REMARKS  
2
1
2
3
1
1
3
1
1
1
1
1
1
9
10  
11  
12  
13  
14  
DECAL, POWDER COATED  
DECAL, SELF-ADJUSTING SEALS  
NAMEPLATE........................................................ 1 ......... CONTACT PARTS DEPT.  
EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10) — PAGE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P MIXER— FRAME ASSY.  
FRAME ASSY.  
PAGE 10 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P MIXER— FRAME ASSY.  
FRAME ASSY.  
NO.  
1
2
3
4
5
7
8
9
PART NO.  
PART NAME  
QTY.  
REMARKS  
514842  
491692  
530023  
507444  
514835  
514836  
EM963692  
492584  
514802  
10176  
LOCK PIN UNIT  
1
1
1
1
1
1
6
6
1
1
1
1
COTTER PIN  
SPRING LOCKING PIN  
WASHER, FLAT 3/4"  
MAIN FRAME  
HANDLE, CLUTCH ENGAGE  
BOLT 1/2" UNC 1-1/2"  
NUT, LOCK 1/2"  
AXLE, UNIVERSAL  
LOCK NUT 1/2" NC  
BOLT 1/2"-13 X 4 G5  
SAFETY CHAIN  
CONNECTOR LINK ..................................................... 2 ...................BEFORE JANUARY 2006  
CONNECTOR LINK ..................................................... 1 ...................AFTER JANUARY 2006  
CLEVIS SAFETY HOOK ............................................ 1 ...................AFTER JANUARY 2006  
CHAIN AND LINK KIT................................................. 1 ...................INCLUDES ITEMS W/  
BALL HITCH 2-INCH ................................................... 1 ...................CONTACT UNIT SALES  
10  
11  
12  
EM124  
13  
*
14  
*
01004  
01004  
516580  
13363KIT  
HBC-1  
HLC-1  
14  
*
14A  
*
15  
16  
17  
18  
*
LOOP HITCH .............................................................. 1 ...................CONTACT UNIT SALES  
PIN HITCH 1-INCH...................................................... 1 ...................CONTACT UNIT SALES  
HPC-1  
EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10) — PAGE 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P MIXER— PADDLE SHAFT ASSY.  
PADDLE SHAFT ASSY.  
PAGE 12 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EM-70 S/P MIXER— PADDLE SHAFT ASSY.  
PADDLE SHAFT ASSY.  
NO.  
1
2
PART NO.  
514753  
492584  
PART NAME  
QTY.  
1
6
REMARKS  
PADDLE SHAFT  
NUT, LOCK 1/2"  
3
4
5
6
EM202896  
EM963110  
EM200292  
EM202898  
504322  
PADDLE ARM, CENTER ENGINE END  
BOLT, 1/2-13 X 3-3/4  
INSERT, PADDLE ARM  
PADDLE ARM, ENGINE END  
WASHER, FLAT 1/2"  
1
2
4
1
7
6
8
9
10  
EM200297  
EM202897  
492367  
EM923023  
EM507497  
EM202929  
EM202928  
2105164  
EM923343  
EM202899  
EM202927  
EM507496  
EM202926  
EM203010  
U-BOLT, END PADDLES  
PADDLE ARM, CENTER TOW END