Multiquip Espresso Maker CMS 94S User Manual

OPERATION AND PARTS MANUAL  
CMS-94S  
CONCRETE MIXER  
Revision #2 (08/04/06)  
STOWCONSTRUCTIONEQUIPMENT  
A DIVISION OF STOW INC.  
PARTS DEPARTMENT:  
800-427-1244  
POST OFFICE BOX 6254  
FAX: 800-672-7877  
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:  
800-478-1244  
CARSON, CA 90749  
310-537-3700 • 888-252-STOW [888-252-7869]  
FAX:310-537-1986 • FAX:800-556-1986  
E-MAIL:S[email protected] WWW:stowmfg.com  
FAX:310-631-5032  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HERE'S HOW TO GET HELP  
PLEASE HAVE THE MODEL AND SERIAL  
NUMBER ON-HAND WHEN CALLING  
PARTSDEPARTMENT  
800-427-1244  
310-537-3700  
FAX: 800-672-7877  
FAX: 310-637-3284  
SERVICEDEPARTMENT  
800-478-1244  
310-537-3700  
FAX: 310-537-4259  
TECHNICALASSISTANCE  
800-478-1244  
FAX: 310-631-5032  
WARRANTYDEPARTMENT  
800-421-1244, EXT. 279 FAX: 310-537-1173  
310-537-3700, EXT. 279  
SALESDEPARTMENT  
310-661-4242  
FAX: 310-604-9237  
877-289-7869 (877-BUY-STOW)  
STOW CMS-94SCONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06) — PAGE 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOW CMS-94SCONCRETE MIXER — TABLE OF CONTENTS  
STOW CMS-94S Concrete  
Mixer  
HONDA GX240K1QA2 ENGINE  
Air Cleaner Assembly......................................... 48-49  
Camshaft Assembly ........................................... 50-51  
Carburetor Assembly ......................................... 52-53  
Control Assembly ............................................... 54-55  
Crankcase Cover Assembly............................... 56-57  
Crankshaft Assembly ......................................... 58-59  
Cylinder Barrel Assembly................................... 60-61  
Cylinder Head Assembly.................................... 62-63  
Fan Cover Assembly .......................................... 64-65  
Flywheel Assembly ............................................ 66-67  
Muffler Assembly ............................................... 68-69  
Fuel Tank Assembly ........................................... 70-71  
Ignition Coil ........................................................ 72-73  
Piston Assembly................................................. 74-75  
Recoil Starter ..................................................... 76-77  
Label Assembly.................................................. 78-79  
Here's How To Get Help ............................................ 3  
Table Of Contents ..................................................... 4  
Parts Ordering Procedures ....................................... 5  
Specifications ............................................................ 6  
Dimensions (Mixer) ................................................... 7  
Safety Message Alert Symbols ................................. 8  
Rules For Safe Operation .................................... 9-10  
Operation and Safety Decals .................................. 11  
General Information ................................................ 12  
Mixer Basic Components ........................................ 13  
Basic Engine Components...................................... 14  
Handwheel Assembly.............................................. 15  
Towing Guidelines ................................................... 16  
Safety Chain Connection ........................................ 17  
Electric Motor ..................................................... 18-19  
Pre-Inspection (Gasoline Engine) ........................... 20  
Initial Start-up (Gasoline Engine)............................ 21  
Initial Start-up (Electric Motor) ................................ 22  
Operation ................................................................ 23  
Maintenance (Engine)........................................ 24-25  
Maintenance (Mixer) .......................................... 26-28  
Troubleshooting (Engine)........................................ 30  
Troubleshooting (Engine/Mixer) .............................. 31  
Explanation Of Code In Remarks Column .............. 32  
Suggested Spare Parts ........................................... 33  
Terms and Conditions of Sale ................................. 80  
ComponetDrawings  
Nameplate and Decals....................................... 34-35  
Mixer Assembly (Steel Drum) ............................ 36-37  
Main Frame Assembly ....................................... 38-39  
Axle Assembly .................................................... 40-41  
Cabinet Assembly .............................................. 42-43  
Gas Engine Mounting Plate Asasembly............ 44-45  
Electric Motor Mounting Plate Asasembly ........ 46-47  
Specification and part number  
are subject to change without  
notice.  
PAGE 4 —STOW CMS-94S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CMS-94S CONCRETE MIXER — PARTS ORDERING PROCEDURES  
When ordering parts,  
please supply the following information:  
Dealeraccountnumber  
Dealernameandaddress  
Shipping address (if different than billing address)  
Returnfaxnumber  
Applicable model number  
Quantity,part number and description of each part  
Specifypreferredmethodofshipment:  
FedEx or UPS Ground  
FedEx or UPS Second Day or Third Day  
FedEx or UPS Next Day  
Federal Express Priority One  
DHL  
Note:Unlessotherwiseindicatedbycustomer, all  
orders are treated as “Standard Orders”, and will  
ship within 24 hours.We will make every effort to  
ship “Air Shipments” the same day that the order is  
received, if prior to 2PM west coast time. “Stock  
Orders” must be so noted on fax or web forms.  
Truck  
Place Your Parts Order Via Web or Fax  
For Even More Savings!  
Here’s how to get help...  
Please have the model and serial number on  
hand when calling.  
Parts Department  
Extra Discounts!  
800-427-1244  
Fax:800-672-7877  
All parts orders which include complete part numbers  
and are received by our automated web parts order  
system, or by fax qualify for the following extra  
discounts:  
310-537-3700  
Fax:310-637-3284  
Service Department  
800-478-1244  
310-537-3700  
Fax:310-537-4259  
Ordered  
via  
Standard  
orders  
Stock orders  
($750 list and above)  
Technical Assistance  
800-478-1244  
Fax  
3%  
5%  
10%  
10%  
Fax:310-631-5032  
Fax:310-537-1173  
Web  
Warranty Department  
800-421-1244, Ext. 279  
310-537-3700, Ext. 279  
Special freight allowances  
when you order 10 or more  
line items via Web or Fax!**  
FedEx Ground Service at no charge for freight  
Sales Department  
310-661-4242  
877-289-7869 (877-BUY-STOW)  
Fax:310-604-9237  
No other allowances on freight shipped by any other  
carrier.  
NOTE:DISCOUNTSARESUBJECTTOCHANGE  
STOWCONSTRUCTIONEQUIPMENT  
A DIVISION OF STOW INC.  
POST OFFICE BOX 6254  
CARSON, CA 90749  
310-537-3700 • 888-252-STOW [888-252-7869]  
FAX:310-537-1986 • FAX:800-556-1986  
E-MAIL:s[email protected] • WWW:stowmfg.com  
Direct TOLL-FREE access  
to our Parts Department:  
Toll-free nationwide — 800-427-1244  
STOW CMS-94SCONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06) — PAGE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOW CMS-94S CONCRETE MIXER — SPECIFICATIONS  
Table 1. Specifications (Engines/Electric Motor)  
Model  
HONDA GX240K1QA2  
Baldor 35LYL229  
Air-cooled 4 stroke, Single Cylinder,  
OHV, Horizontal Shaft Gasoline Engine  
1.5 HP, Single-phase 115/230  
VAC, Electric Motor  
Type  
2.90 in. X 2.30 in.  
(73 mm x 58 mm)  
Bore X Stroke  
N/A  
Displacement  
Max Output  
14.81 cc  
N/A  
8.0 H.P./3600 R.P.M.  
1.5 HP/1725 R.P.M.  
Engine/Electric  
Motor  
Approx. 1.59 U.S. Gallons  
(6 Liters)  
Fuel Tank Capacity  
N/A  
Fuel  
Unleaded Gasoline  
2-1/3 pints  
N/A  
N/A  
Lube Oil Capacity  
Speed Control  
Method  
Centrifugal Fly-weight Type  
N/A  
Starting Method  
Input Voltage  
Recoil Start  
N/A  
Electric  
115/230 VAC Single Phase  
Dimension  
(L x W x H)  
14.0 x 16.9 X 16.1 in.  
(355 X 430 X 410 mm)  
15.55 x 8.65 X 9.06 in.  
(395 X 220 X 230 mm)  
Dry Net Weight  
55.1 lbs (25 Kg.)  
Approx. 12 lbs (5.4 kg.)  
Table 2. CMS-94S Mixer Specifications  
Height  
Width  
63 in. (1,600mm)  
51 in. (1,295 mm)  
86 in. (2,185 mm)  
Length  
Maximum Drum Capacity  
Maximum Mixing Capacity  
Bag Capacity  
12.35 cu. ft. (350 liters)  
9.0 cu. ft. (255 liters)  
(1 ~ 1.5 bags)  
Weight - Without Engine/ElectricMotor  
755 lbs. (342 Kg.)  
PAGE 6 —STOW CMS-94S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOW CMS-94S CONCRETE MIXER — DIMENSIONS (MIXER)  
See Table 2 for mixer dimensions  
Figure 1. Mixer Dimensions  
STOW CMS-94SCONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06) — PAGE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOW CMS-94S — SAFETY MESSAGE ALERT SYMBOLS  
FORYOUR SAFETY ANDTHE SAFETY OF OTHERS!  
HAZARD SYMBOLS  
Safety precautions should be followed at all times when  
operating this equipment. Failure to read and understand the  
Safety Messages and Operating Instructions could result in  
injury to yourself and others.  
Rotating Parts  
This Owner's Manual has been  
developed to provide complete  
instructions for the safe and efficient  
operation of the STOW Model  
CMS-94S (Steel) Concrete Mixer.  
Before using this mixer,  
ensure that the operating  
individual has read and  
understands all instructions in  
this manual.  
NEVER operate equipment with covers, or  
guards removed. Keep fingers, hands, hair and  
clothing away from all moving parts to prevent  
injury.  
Accidental Starting  
ALWAYS place the circuit breaker or power  
ON/OFF switch in the OFF position when the  
pump is not in use.  
SAFETY MESSAGE ALERT SYMBOLS  
Sight and Hearing hazard  
The three (3) Safety Messages shown below will inform you  
about potential hazards that could injure you or others. The  
Safety Messages specifically address the level of exposure to  
the operator, and are preceded by one of three words: DANGER,  
WARNING, or CAUTION.  
ALWAYS wear approved eye and hearing  
protection.  
DANGER: You WILL be KILLED or  
SERIOUSLY injured if you do not follow  
directions.  
Respiratory Hazard  
ALWAYS wear approved respiratory  
protection.  
WARNING: You CAN be KILLED or  
SERIOUSLY injured if you do not follow  
directions.  
Equipment Damage Messages  
CAUTION: You CAN be injured if you  
Other important messages are provided throughout this manual  
to help prevent damage to your mixer, other property, or the  
surrounding environment.  
do not follow directions.  
Potential hazards associated with the STOW CMS-94S concrete  
mixer operation will be referenced with Hazard Symbols which  
appear throughout this manual, and will be referenced in  
conjunction with Safety Message Alert Symbols.  
This mixer, other property, or the  
surrounding environment could  
be damaged if you do not follow  
instructions.  
PAGE 8 —STOW CMS-94S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOW CMS-94S CONCRETE MIXER — RULES FOR SAFE OPERATION  
NEVERtouchthehotexhaustmanifold,  
muffler or cylinder.Allow these parts to  
cool before servicing engine or mixer.  
DANGER:  
Failure to follow instructions in this manual may  
lead to serious injury or even death! This  
equipment is to be operated by trained and  
qualified personnel only!This equipment is for  
industrial use only.  
The following safety guidelines should always be used when  
operating the STOW CMS-94S Concrete Mixer:  
HighTemperatures – Allow the engine to cool before adding  
fuel or performing service and maintenance functions. Contact  
with hot components can cause serious burns.  
GENERAL SAFETY  
DO NOT operate or service this equipment before  
readingthisentiremanual.  
The engine of this mixer requires an adequate free flow of  
cooling air. NEVER! operate the mixer in any enclosed or  
narrow area where free flow of the air is restricted. If the air  
flow is restricted it will cause  
This equipment should not be operated by  
persons under 18 years of age.  
NEVER operate this equipment without proper  
protective clothing, shatterproof glasses, steel-  
toed boots and other protective devices required  
by the job.  
serious damage to the mixer  
or engine and may cause  
injury to people and property.  
Rememberthe mixer's engine  
(gasoline models only) gives  
off DEADLY gases.  
NEVER operate this equipment when not feeling  
well due to fatigue, illness or taking medicine.  
ALWAYS refuel in a well-ventilated area, away from sparks  
NEVER operate this equipment under the  
influence or drugs or alcohol.  
and open flames.  
ALWAYS use extreme caution when working with flammable  
liquids. When refueling, stop the engine and allow it to cool.  
DO NOT smoke around or near the machine. Fire or explosion  
could result from fuel vapors, or if fuel is spilled on a hot  
engine.  
Whenever necessary, replace nameplate, operation and  
safety decals when they become difficult read.  
NEVER operate the mixer in an explosive  
atmosphere or near combustible  
materials. An explosion or fire could result  
causing severe bodily harm or even  
death.  
ALWAYS check the machine for loosened threads or bolts  
before starting.  
ALWAYS wear proper respiratory (mask) hearing and eye  
protection equipment when operating the mixer.  
Topping-off to filler port is dangerous, as it tends to spill fuel.  
Refer to the Engine Owner's Manual for engine technical  
questions or information.  
NEVER use accessories or attachments, which are not  
recommended by STOW for this equipment. Damage to the  
equipment and/or injury to user may result.  
NEVER! place hands inside the drum while the drum is  
rotating.  
Manufacturer does not assume responsibility for any accident  
due to equipment modifications.  
STOW CMS-94SCONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06) — PAGE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STOW CMS-94S CONCRETE MIXER — RULES FOR SAFE OPERATION  
NEVER run engine without air cleaner.Severe engine damage  
NEVER disconnect any "emergency or safety devices".  
These devices are intended for operator safety. Disconnection  
of these devices can cause severe injury, bodily harm or even  
death! Disconnection of any of these devices will void all  
warranties.  
may occur.  
ALWAYS read, understand, and follow procedures in  
Operator’s Manual before attempting to operate equipment.  
ALWAYS be sure the operator is familiar with proper safety  
precautions and operations techniques before using roller.  
If mixer is equipped with an electric motor, operate electric  
motor only at the specified voltage indicated on the nameplate.  
ALWAYS store equipment properly when it is not being used.  
Equipment should be stored in a clean, dry location out of the  
reach of children.  
Make sure the OFF/ON power switch on the electric motor is  
always in the OFF position before inserting the mixer's power  
plug into an AC receptacle (electric model only).  
NEVER leave the mixer unattended, turn off engine or electric  
motor when unattended.  
Maintenance Safety  
NEVER lubricate components or attempt service on a running  
machine.  
CAUTION must always be observed while servicing this mixer.  
Rotating parts can cause injury if contacted.  
ALWAYS allow the machine a proper amount of time to cool  
before servicing.  
Unauthorized equipment modifications will void all  
warranties.  
Keep the machinery in proper running condition.  
Ensure that any extension cable is protected against damage  
and not liable to be tripped over or trapped underneath the  
mixer.  
Fix damage to the machine immediately and always replace  
broken parts, or missing decals.  
DO NOT allow extension cord to come into contact with water  
Dispose of hazardous waste properly.Examples of potentially  
hazardous waste are used motor oil, fuel and fuel filters.  
or fluids.  
DO NOT spray water onto electric motor.  
DO NOT use food or plastic containers to dispose of  
hazardous waste.  
This mixer is intended for the production of concrete. Mixer  
must be used only for its intended purpose.  
DO NOT pour waste, oil or fuel directly onto the ground,  
down a drain or into any water source.  
This mixer is not suitable for the mixing of flammable or  
explosive substances.  
Emergencies  
NEVER operate the mixer in an explosive atmosphere.  
ALWAYS know the location of the nearest fire extinguisher  
and first aid kit.  
Before starting the mixer, check that all guards are in position  
and correctly fitted.  
Keep area around the mixer clear of obstructions which  
could cause persons to fall onto moving parts.  
ALWAYS ensure mixer is on level ground before mixing.  
Become familiar with the controls of the mixer before  
operating.  
In emergencies always know the location of the  
nearest phone or keep a phone on the job site.  
Also know the phone numbers of the nearest  
ambulance, doctor and fire department. This  
information will be invaluable in the case of an  
emergency.  
ALWAYS replace any worn or damaged warning decals.  
Ensure the drum is rotating while filling and emptying the  
drum.  
ALWAYS disconnect AC power plug from power source  
before moving mixer (electric model only).  
High Temperatures – Always stop engine and allow the  
engine to cool before adding fuel, oil or performing service  
and maintenance functions. Contact with hot components  
can cause serious burns.  
PAGE 10 —STOW CMS-94S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #2 (08/04/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.