Multiquip Saw SP605716 User Manual
PARTS MANUAL  
Diamond Back  
SP4 "STREET PRO"  
PROFESSIONAL SLAB SAW  
57 HP DEUTZ DIESEL ENGINE  
MODELS  
SP605716, SP605720, SP605726  
SP605730, SP605736  
Revision #0 (03/22/06)  
To find the latest revision of this  
publication, visit our website at:  
www.multiquip.com  
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — PROPOSITION 65WARNING  
PAGE 2 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — SILICOSIS/RESPIRATORYWARNINGS  
WARNING WARNING  
SILICOSIS WARNING  
RESPIRATORY HAZARDS  
Grinding/cutting/drilling of masonry, concrete, metal and  
other materials with silica in their composition may give  
off dust or mists containing crystalline silica. Silica is a  
basic component of sand, quartz, brick clay, granite and  
numerous other minerals and rocks. Repeated and/or  
substantial inhalation of airborne crystalline silica can  
cause serious or fatal respiratory diseases, including  
silicosis. In addition, California and some other  
authorities have listed respirable crystalline silica as a  
substance known to cause cancer. When cutting such  
materials, always follow the respiratory precautions  
mentioned above.  
Grinding/cutting/drilling of masonry, concrete, metal and  
other materials can generate dust, mists and fumes  
containing chemicals known to cause serious or fatal  
injury or illness, such as respiratory disease, cancer,  
birth defects or other reproductive harm. If you are  
unfamiliar with the risks associated with the particular  
process and/or material being cut or the composition of  
the tool being used, review the material safety data  
sheet and/or consult your employer, the material  
manufacturer/supplier, governmental agencies such as  
OSHA and NIOSH and other sources on hazardous  
materials. California and some other authorities, for  
instance, have published lists of substances known to  
cause cancer, reproductive toxicity, or other harmful  
effects.  
Control dust, mist and fumes at the source where  
possible. In this regard use good work practices and  
follow the recommendations of the manufacturers or  
suppliers, OSHA/NIOSH, and occupational and trade  
associations. Water should be used for dust  
suppression when wet cutting is feasible. When the  
hazards from inhalation of dust, mists and fumes cannot  
be eliminated, the operator and any bystanders should  
always wear a respirator approved by NIOSH/MSHA for  
the materials being used.  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Water Pump Kit Assembly.................................. 74-75  
Glow Plug Kit Assembly ..................................... 76-77  
Bladeshaft Seal Kit Assembly ............................ 78-79  
Bushing Extension Kits Assembly ..................... 80-81  
Engine Block Heater Assembly (Option)............ 82-83  
Collar/Flange Puller Assembly (Option)............. 84-85  
Seal Sleeve Puller Assembly ............................. 86-87  
Seal Sleeve Puller Assembly ............................. 88-89  
MQ SP4 “Street Pro”  
Professional Slab Saw  
Proposition 65 Warning ............................................. 2  
Silicosis/Respiratory Warnings .................................. 3  
Table Of Contents ..................................................... 4  
Parts Ordering Procedures ....................................... 5  
Explanation Of Codes In Remarks Column .............. 6  
Suggested Spare Parts ............................................. 7  
Component Drawings  
Deck/Gauge Panel Assembly................................. 8-9  
Nameplate and Decals Assembly ...................... 10-11  
Access Panel Assembly ..................................... 12-13  
Fuel Tank Assembly ........................................... 14-15  
Lift Pump Circuit Assembly ................................ 16-17  
F-N-R Control Handle Assembly........................ 18-19  
Joystick Mounting Assembly .............................. 20-21  
Water System Assembly .................................... 22-23  
Pulley and V-Belt Assembly................................ 24-25  
Depth Stop Meter/Cable Assembly .................... 26-27  
Depth Stop Cylinder/Valve Assembly................. 28-29  
Belt Guard .......................................................... 30-31  
Engine Assembly ............................................... 32-33  
Air Intake Hose Assembly .................................. 34-35  
Muffler Kit Assembly .......................................... 36-37  
Engine Mounting ................................................ 38-39  
Pointer Assembly ............................................... 40-41  
Gauges and Controls Assembly ........................ 42-43  
Battery Assembly ............................................... 44-45  
Front Axle Assembly .......................................... 46-47  
Drive Assembly .................................................. 48-49  
Bladeshaft and Mounting Assembly .................. 50-51  
Light Connector/Dash Panel Assembly.............. 52-53  
Engine Guard Assembly .................................... 54-55  
Blade Guard Mount/ Wiper Assembly ................ 56-57  
Lower Belt Guard Assembly .............................. 58-59  
Handle and Light Assembly ............................... 60-61  
Rear Point and Foot Rest Assembly .................. 62-63  
Console Mounting Assembly ............................. 64-65  
Cable Mount Assembly ...................................... 66-67  
Optional Flange Guard Assembly ...................... 68-69  
Blade Guard Assembly ...................................... 70-71  
Wiring Harness/Circuit Breaker Assembly ......... 72-73  
PAGE 4 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Effective:June 1st, 2005  
PARTS ORDERING PROCEDURES  
Ordering parts has never been easier!  
Choose from three easy options:  
Best Deal!  
Order via Internet (Dealers Only)  
Orderpartson-lineusingMultiquip’sSmartEquipwebsite!  
:
If you have an MQ Account, to obtain a  
Username and Password, E-mail us at:  
[email protected].  
■
■
■
View Parts Diagrams  
Order Parts  
PrintSpecificationInformation  
To obtain an MQ Account, contact your  
District Sales Manager for more information.  
Use the internet and qualify for a 5% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Gotowww.multiquip.comandclickon  
to log in and save!  
Order Parts  
Note: Discounts Are Subject To Change  
Fax your order in and qualify for a 3% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Order via Fax (Dealers Only)  
:
All customers are welcome to order parts via Fax.  
Domestic (US) Customers dial:  
1-800-6-PARTS-7 (800-672-7877)  
Note: Discounts Are Subject To Change  
Domestic (US) Dealers Call:  
1-800-427-1244  
Order via Phone:  
Non-Dealer Customers:  
International Customers should contact  
their local Multiquip Representatives for  
Parts Ordering information.  
Contact your local Multiquip Dealer for  
parts or call 800-427-1244 for help in  
locating a dealer near you.  
When ordering parts, please supply:  
❒
❒
❒
❒
❒
❒
Dealer Account Number  
❒
Specify Preferred Method of Shipment:  
✓
Fed Ex/UPS  
✓ DHL  
Dealer Name and Address  
■
■
Priority One  
Ground  
✓
Truck  
Shipping Address (if different than billing address)  
Return Fax Number  
Applicable Model Number  
■ Next Day  
■
Second/ThirdDay  
Quantity, Part Number and Description of Each Part  
Unless otherwise indicated by customer, all orders are treated asStandard Orders and will ship  
within24hours.WewillmakeeveryefforttoshipAirShipmentsthesamedaytheorderisreceived,  
if received prior to 2PM PST. Stock Orders must be noted on fax or web order form.  
NOTE  
WE ACCEPT ALL MAJOR CREDIT CARDS!  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 — EXPLANATION OF CODE IN REMARKS COLUMN  
The following section explains the different symbols and remarks QTY. Column  
used in the Parts section of this manual. Use the help numbers  
found on the back page of the manual if there are any questions.  
Numbers Used - Item quantity can be indicated by a number,  
a blank entry, or A/R.  
A/R (As Required) is generally used for hoses or other parts  
that are sold in bulk and cut to length.  
The contents and part numbers listed in the parts section are  
subject to change without notice. Multiquip does not  
guarantee the availibility of the parts listed.  
A blank entry generally indicates that the item is not sold  
separately. Other entries will be clarified in the “Remarks”  
Column.  
REMARKS Column  
Sample Parts List:  
Some of the most common notes found in the “Remarks”  
Column are listed below. Other additional notes needed to  
describe the item can also be shown.  
NO. PART NO. PART NAME  
QTY. REMARKS  
1
2
2
3
4
12345  
BOLT ....................... 1.... INCLUDES ITEMS W/  
WASHER, 1/4 IN. ........... NOT SOLD SEPARATELY  
WASHER, 3/8 IN. .... 1.... MQ-45TONLY  
HOSE .................... A/R.. MAKE LOCALLY  
BEARING ................ 1.... S/N2345B AND ABOVE  
*
*
*
12347  
12348  
12349  
Assembly/Kit - All items on the parts list with the same unique  
symbol will be included when this item is purchased.  
Indicated by:  
“INCLUDES ITEMS W/(unique symbol)”  
NO. Column  
Unique Symbols - All items with same unique symbol  
Serial Number Break - Used to list an effective serial number  
range where a particular part is used.  
( , #,  
+
, %, or >) in the number column belong to the same  
*
assembly or kit, which is indicated by a note in the “Remarks”  
column.  
Indicated by:  
“S/N XXXXX AND BELOW”  
“S/N XXXX AND ABOVE”  
“S/N XXXX TO S/N XXX”  
Duplicate Item Numbers - Duplicate numbers indicate  
multiple part numbers are in effect for the same general item,  
such as different size saw blade guards in use or a part that  
has been updated on newer versions of the same machine.  
Specific Model Number Use - Indicates that the part is used  
only with the specific model number or model number variant  
listed. It can also be used to show a part is NOT used on a  
specific model or model number variant.  
When ordering a part that has more  
than one item number listed, check  
the remarks column for help in  
determining the proper part to order.  
NOTE  
Indicated by:  
“XXXXX ONLY”  
“NOT USED ON XXXX”  
“Make/Obtain Locally” - Indicates that the part can be  
purchased at any hardware shop or made out of available  
items. Examples include battery cables, shims, and certain  
washers and nuts.  
PART NO. Column  
Numbers Used - Part numbers can be indicated by a number,  
a blank entry, orTBD.  
“Not Sold Separately” - Indicates that an item cannot be  
purchased as a separate item and is either part of an  
assembly/kit that can be purchased, or is not available for  
sale through Multiquip.  
TBD (To Be Determined) is generally used to show a part that  
has not been assigned a formal part number at time of  
publication.  
A blank entry generally indicates that the item is not sold  
separately or is not sold by Multiquip. Other entries will be  
clarified in the “Remarks” Column.  
PAGE 6 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — SUGGESTED SPARE PARTS  
SP-6057 CONCRETE SAW  
1 to 5 Units  
Qty...... P/N ......................... Description  
1 ......... 345008.................... Coupler, Splined  
1 ......... 446010.................... Valve, Cartridge  
1 ......... 560028-5................. Switch Assembly  
1 ......... 521004.................... V-Belt (16", 20" and 26" only)  
1 ......... 521001.................... V-Belt (30" and 36" only)  
1 ......... 521007.................... V-Belt All Models  
2 ......... 520007.................... 5G 3VX 530 drive belt  
1 ......... 300008.................... Primary Air Filter Element  
1 ......... 300009.................... Safety Air Filter Element  
1 ......... 306006.................... Transaxle Hydraulic Filter  
2 ......... 500009.................... Wheel, Rear Axle  
2 ......... 582038.................... Bushing, Rear Wheel  
2 ......... 180003.................... Outer Flange  
2 ......... 180004.................... Inner Flange  
1 ......... 582012.................... Bushing, Flange  
1 ......... 915316.................... Screw, HHC 5/8-11 x 3 LH Gr8  
1 ......... 915315.................... Screw, HHC 5/8-11 x 3 RH Gr8  
1 ......... 577009.................... Gasket, Drain Plug  
1 ......... 306012.................... Engine Oil Filter, Deutz  
1 ......... 304010.................... Engine Fuel Filter, Deutz  
1 ......... 362002.................... Tube, B.G. Water Delivery R.H.  
1 ......... 362003.................... Tube, B.G. Water Delivery L.H.  
1 ......... 25643 ..................... Relief Check Valve  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY.  
DECK PANEL DECAL ASSY.  
PAGE 8 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY.  
DECK/GAUGE PANEL ASSY.  
NO  
1
2
PART NO  
600151  
600152  
PART NAME  
GAUGE PANEL, 6000 SERIES  
DECK PANEL, 6000 SERIES  
QTY.  
1
1
REMARKS  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY.  
NAMEPLATE AND DECAL ASSY.  
PAGE 10 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY.  
NAMEPLATE AND DECAL ASSY.  
NO  
1
2
PART NO  
25250-001  
606004  
25782  
PART NAME  
QTY.  
REMARKS  
DECAL, WARNING, KEEP FEET CLEAR  
DECAL, BLADE GUARD REMOVAL  
DECAL, MQ DIAMOND LOGO  
2
2
4
3
4
5
6
7
21302  
TBD  
13118  
35137  
DECAL, WARNING, INSTALL BLADE GUARD ............ 1.............. REPLACES P/N 606004  
DECAL, SP4 LOGO  
2
1
1
DECAL, POWDER COATED  
DECAL, WARNING, READ MANUAL  
8
9
DECAL, NAMEPLATE.................................................. 1.............. CONTACT MQ PARTS DEPT.  
M600002  
22122-001  
25249-001  
23330-001  
25491  
20525  
604001  
DECAL, DIESEL FUEL ONLY  
1
1
2
1
1
1
1
1
10  
11  
12  
13  
14  
15  
16  
DECAL, WARNING, SERIOUS INJURY  
DECAL, WARNING, KEEP HANDS CLEAR  
DECAL, CAUTION, DRIVE BELT  
DECAL, ROTATION, CW  
DECAL, WARNING, PROPOSITION 65  
DECAL, WARNING, INSTALL BELT GUARD  
DECAL, ROTATION, CCW  
25678  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ACCESS PANEL ASSY.  
ACCESS PANEL ASSY.  
PAGE 12 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ACCESS PANEL ASSY.  
ACCESS PANEL ASSY.  
NO  
PART NO  
102039  
560020  
12287  
102039-1  
577002  
29057  
10024  
10930  
29093  
PART NAME  
QTY.  
REMARKS  
1
PANEL ASSY., REAR CONSOLE, RED ........................ 1 ................. INCLUDES ITEMS W/  
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
LATCH, REAR SAW ACCESS PANEL  
SCREW, THP 1/4-20 X 3/4" SS  
PANEL, REAR CONSOLE 6000, RED  
WEATHER STRIP, REAR SAW ACCESS PANEL  
DOCUMENT BOX, CP90007-07  
NUT, NYLOCK 1/4-20  
2
4
1
1.75 FT.  
1
4
4
2
WASHER, FENDER, 1/4 X 1-1/4"  
GASKET, TRIMLOCK X-109BT  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — FUELTANK ASSY.  
FUEL TANK ASSY.  
PAGE 14 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — FUELTANK ASSY.  
FUEL TANK ASSY.  
NO  
PART NO  
140004  
29509  
19633  
368006  
35009  
19473  
35007  
446025  
25553  
PART NAME  
QTY.  
REMARK  
1
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
FUEL TANK, 6000 & 6400 10 GAL  
CAP, FUEL TANK 2.25 DIA, ONE WAY VALVE  
BUSHING, RUBBER FUEL DAPCO 10672  
FITTING, FUEL 90 DEG. #4 X #6 BARB  
HOSE, 22.5" - 5/16" FUEL LINE  
CLAMP, HOSE WORM # 2  
1
1
2
1
1
4
1
1
HOSE, 26.5" - 1/4" FUEL LINE  
VALVE, FUEL ON/OFF  
FUEL TANK ASSY.......................................................... 1 ................. INCLUDES ITEMS W/  
*
10  
11  
12  
102041  
933242  
0166  
PLATFORM W/A SAW FUEL TANK  
WASHER, FLAT SAE 3/8" GRADE 9  
SCREW, HHC 3/8-16" X 7/8"  
1
5
5
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY.  
LIFT PUMP CIRCUIT ASSY.  
PAGE 16 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY.  
LIFT PUMP CIRCUIT ASSY.  
NO  
1
2
3
4
PART NO  
340010  
35255  
446009  
25542  
PART NAME  
QTY.  
REMARK  
PUMP ASSY., HYDRAULIC LIFT .................................... 1........... INCLUDES ITEMS W/  
SOLENOID ASSY., LIFT PUMP ...................................... 1........... INCLUDES ITEMS W/  
SOLENOID VALVE ASSY., SAW LIFT............................. 1........... INCLUDES ITEMS W/  
CYLINDER ASSY., SAW LIFT ......................................... 1........... INCLUDES ITEMS W/  
>
*
#
%
5
6
7
8
21095  
25758  
368817  
25941  
366690  
35001  
35002  
35003  
35008  
570050  
169000  
06500-007  
933241  
4683  
FITTING, STR 4MJ - 4MO  
FITTING, ORIFICE 4MJ - 4MO X .026  
FITTING, 90 4MJ - 4MO  
FITTING BRANCH TOP SWIVEL 4MJ - 4MJ - 4FJ  
FITTING, TEE RUN 4MJ - 4MJ - 4FJ  
HOSE ASSY. 13.2" #4HP W/370821/370895  
HOSE ASSY. 13.7" #4HP W/370821/370821  
HOSE ASSY. 19.7" #4HP W/370821/370821  
HOSE ASSY., 63.5" #4LP W/370670/370895  
3
1
2
1
1
1
1
1
1
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
CLAMP ASSY., #4 SINGLE HOSE .................................. 2........... INCLUDES ITEMS W/+  
PIN, CYLINDER ROD END  
SCREW, HHC 5/16-18 x 7/8  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
SCREW, HHC 5/16-18 X 5/8  
WASHER, FLAT, #10  
2
2
4
2
2
2
6
2
2
4
1
1
1
1
2
1
1
1
4
2
1
4
1
1
1
1
1
1
1
2203  
923186  
933240  
2508  
12171  
12179  
12176  
25628  
444014  
446010  
405070  
446029  
405035  
405066  
480003  
2621  
447005  
5277  
340030  
345006  
25659  
SCREW, SHC 12-24 X 3/4  
WASHER, FLAT SAE 1/4 GRD 9 YZ  
SCREW, HHC 1/4-20 x 2-1/4  
SEAL, WEATHERPACK, 16-18 GA GREEN  
TERMINAL, WEATHERPACK , MALE 14-16 GA  
CONNECTOR, WEATHERPACK 2 PIN MALE  
SOLENOID, LIFT PUMP  
*
24  
25  
#
*
*
26  
27  
28  
29  
30  
32  
33  
34  
35  
36  
37+  
38  
39  
40  
41  
42  
43  
44  
*
#
CATRIDGE BODY  
VALVE CARTRIDGE  
#
#
#
#
#
%
%
%
SEAL, WEATHERPACK, 20-22 GA RED  
COIL, 12 VDC CARTRIDGE VALVE  
PLUG-SEAL WEATHER PACK GREEN  
CONNECTOR, WEATHERPACK 3 PIN MALE  
SEAL, OIL CR #9815  
FITTING, GREASE ZERK STR. 1/4-28  
CYLINDER LIFT, 1.75 X 4.120  
HHC 1/4-20 X 1-1/2  
1200 WATT MOTOR ASSY.  
SPLINED COUPLER  
ADAPTER  
HYDRAULIC PUMP  
RELIEF CHECK VALVE  
>
>
>
>
25660  
25643  
147006  
144010  
>
>
FENNER SMALL FILLER CAP  
.5L MICROPACK TANK  
>
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY.  
F-N-R CONTROL AND HANDLE ASSY.  
PAGE 18 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY.  
F-N-R CONTROL AND HANDLE ASSY.  
NO  
1%  
PART NO  
560030  
PART NAME  
QTY.  
REMARK  
F-N-R CONTROL HANDLE ASSY. ....................... 1 ...................... INCLUDES ITEMS W/  
*
2 %  
560028-6  
5600028-8  
560028-4  
560028-3  
560028-5  
560028-1  
60118  
SCREW, #6-32 X 3/8  
WASHER, FLAT #4 NYLON  
RUBBER BOOT  
PLATE, SIDE SWITCH  
SWITCH ASSEMBLY  
HANDLE HOUSING  
WIRE, F-N-R  
5
5
2
1
2
1
1
1
1
*
3 %  
*
4 %  
*
5 %  
*
6 %  
*
7 %  
*
8 %  
*
9 %  
925381  
SCREW, SET 1/4-20 X 3/8  
PLATE, FRONT SWITCH  
*
10 % 560028-2  
*
12  
25627  
405070  
12223  
405046  
6904  
580001  
440006  
120077  
565006  
915003  
584044  
2295  
F-N-R CONTROL ASSY...................................... 1 ...................... INCLUDES ITEMS W/%  
13%  
14%  
15%  
16  
SEAL, WEATHERPACK, RED  
TERMINALWEATHERPACK  
4
4
4
4
2
1
1
1
1
1
1
1
1
CONNECTOR,TERMINAL, MALE  
NUT, HEX FINISH 1/4-28 ZINC  
ROD END, 1/4-20 FEMALE RH  
CABLE, CONTROL 40" X 2" STROKE  
MOUNT W/A TRANSAXLE CTRL. CABLE  
SPRING, CTRL. CABLE TENSIONING  
SCREW, HHC 1/4-20 X 3/4 GRD. 8  
RETAINER, FNR CABLE SPRING  
SCREW, HHC 1/4-20 X 7/8  
17  
18  
19  
20  
21  
22  
23  
24  
440005  
933240  
PLATE, F-N-R PINTLE CONTROL  
WASHER, FLAT SAE 1/4" GRD. 9  
25  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY.  
JOYSTICK MOUNTING ASSY.  
PAGE 20 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY.  
JOYSTICK MOUNTING ASSY.  
NO  
PART NO  
0161D  
10019  
1579  
2203  
PART NAME  
NUT, HEX FINISH 5/16-18  
NUT, FYLOC #10-32  
SCREW. JJC 1/4-20 X .5  
WASHER, FLAT, #10  
CORD GRIP, SAW FNR CONTROL  
BOOT, FNR CONTROL HANDLE  
SPACER, F-N-R  
BELLCRANK, SAW F-N-R  
PLATE, NEUTRAL DETENT  
F-N-R MOUNTING PLATE  
CONTROL LEVER  
QTY.  
2
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
2
REMARK  
1
*
2
*
3
*
4
*
5
405053  
442005-6  
442006-3  
442011  
442012  
442013  
442021  
442022  
460018  
565005  
584021  
584023  
584024  
926348  
933015  
933073  
933225  
933240  
933242  
938062  
973735  
35122  
*
6
*
7
*
8
*
9
*
10  
*
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
SPACER, F-N-R DELRIN  
CAM ROLLER, SAW FNR CONTROL  
EXTENSION SPRING F-N-R CONTROL  
DENTENT BALL, SAW FNR CONTROL  
PIN, LONG SPRING HANGER  
PIN, SHORT SPRING HANGER  
SCREW, SHOULDER 3/8-16 X 3/4  
FRICTION DISC, SAW F-N-R  
1/2 X 1-1/4 BELLEVILLE WASHER  
WASHER, FENDER 1/2 X 1-1/2 ZINC  
WASHER, FLAT 1/4 SAE  
WASHER, FLAT 3/8 SAE  
LOCKNUT 3/8-16YZ  
SCREW, BHSC 10-24X1-SS  
F-N-R MOUNTING ASSY. ..........................1................ INCLUDES ITEMS W/  
4
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — WATER SYSTEM ASSY.  
WATER SYSTEM ASSY.  
PAGE 22 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — WATER SYSTEM ASSY.  
WATER SYSTEM ASSY.  
NO  
1
2
3
4
5
6
7
8
PART NO  
446004  
25827  
26496  
320009  
25931  
35087  
35085  
35086  
923143  
PART NAME  
QTY.  
REMARKS  
VALVE, BALL, 1/2 BRASS  
2
1
1
1
4
1
1
1
4
FITTING, BRASS (F) 3/4 GHT SWIVEL 1/2 MNPT  
FITTING, 90 1/2MP- 1/2FP  
FITTING, QD FEM SNAPTITE PHC4 - 4F  
FITTING, 90 8BARB - 1/2 MP (4390-8-8)  
HOSE, 3.25" #8LP  
HOSE, ASM 114.3" #8LP W/25932/25931  
HOSE, 17" #8LP  
SCREW, SHC 10-24 x 3/8"  
9
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY.  
PULLEY AND V-BELT ASSY.  
PAGE 24 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY.  
PULLEY AND V-BELT ASSY.  
NO  
1
1
1
1
1
2
2
PART NO  
540046  
540035  
540041  
540041  
540047  
25630  
PART NAME  
QTY. REMARKS  
PULLEY, BLADESHAFT 3V 4.2 10G .............................. 1 ......... 16" BLADE  
PULLEY, BLADESHAFT 3V 4.7 10G .............................. 1 ......... 20" BLADE  
PULLEY, BLADESHAFT 3V 5.0 10G .............................. 1 ......... 26 & 30" BLADE  
PULLEY, BLADESHAFT 3V 5.3 10G .............................. 1 ......... 30" BLADE  
PULLEY, BLADESHAFT 3V 5.6 10G .............................. 1 ......... 36" BLADE  
PULLEY, ENGINE ASSY. ................................................ 1 ......... 16" BLADE, INCLUDES ITEMS W/#  
PULLEY, ENGINE ASSY. ................................................ 1 ......... 20" BLADE, INCLUDES ITEMS W/+  
PULLEY, ENGINE ASSY. ................................................ 1 ......... 26, 30 & 36" BLADES, INCLUDES ITEMS W/%  
25635  
2
25556  
3
10057-061  
460023  
460016  
544004  
261002-1  
544005  
544006  
544008  
25557  
KEY, 1/2" SQ X 3-1/2"  
1
4
BUSHING, TAPER-LOCK 2012 X 1-7/8 .......................... 1 ......... 16" BLADE ONLY  
BUSHING, TAPER-LOCK 2517 X 1-7/8 .......................... 1 ......... 20, 26, 30 & 36 BLADES  
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
15  
16  
17  
18  
19  
20  
CAP, SAW PTO  
1
1
1
1
1
ADAPTER PLATE, DEUTZ ENGINE  
FLANGE, SPLINED, DRIVE  
SHAFT, SPLINED, PRIMARY SAW DRIVE  
FLANGE, SPLINED,DRIVEN  
BELTTENSIONER ASSY. ............................................... 1 ......... INCLUDES ITEMS W/@  
MOUNT W/A, BELT TENSIONER  
BELT DRIVE JACKSHAFT ASSY.................................... 1 ......... INCLUDES ITEMS W/$  
V-BELT, 5G 3 VX 530 MATCHMAKER ............................ 2 ......... ALL MODELS  
V-BELT, AX-42 ................................................................ 1 ......... ALL MODELS  
V-BELT, AX-38 ................................................................ 1 ......... 16", 20" AND 26" ONLY  
V-BELT, AX-39 ................................................................ 1 ......... 30" AND 36" BLADES  
SCREW, HHC M10-1.5x30MM FT 10.9 NP  
WASHER, FLAT SAE 9/16 GRD 9YZ  
SCREW, HHC 3/8-16x3/4 GR8YZ  
SCREW, HHC M10-1.0x50MM 10.9 NP  
SCREW, FHSC M10-1.5 x 25MM NP  
SCREW, SHC 1/4-20 x 3/4  
SCREW, FHSC 10-24 x 5/8 NP  
PULLEY, 4.125 x .750 1A  
SCREW, SHS,CP 5/16-18 x 3/8  
SNAP RING - HO-185  
BEARING, ROLLER # 6204 2RS  
JACKSHAFT ARM W/A  
KEY, 3/16 SQ x 1.0  
JACKSHAFT, SAW BELT DRIVE  
SCREW, HHC 1/2-13 X 5  
WASHER, FLAT SAE 1/2 GRD 9YZ  
FITTING, GREASE ZERK STR 1/8 MP  
NUT, NYLOC 1/2-13  
SCREW, HHC 1/4-20 x 3/4 GRD 8  
BEARING SUPPORT, CONCRETE SAW PTO  
SNAP RING, HO 268  
120232  
13016  
1
520007  
521007  
521004  
521011  
940694  
933245  
915103  
938422  
939978  
923203  
924200  
540030  
925437  
576003  
460021  
106097  
584013  
167005  
10307  
8
8
2
8
3
8
4
2
4
2
2
1
2
1
1
2
1
1
8
1
1
5
1
21  
22  
23$  
24$  
25$  
26$  
27$  
28$  
29$  
30$  
31$  
32$  
33$  
34#+%  
35#+%  
36#+%  
37#+%  
38#+%  
39#  
39+  
39%  
40@  
41@  
42@  
43@  
44@  
45@  
46  
933244  
960102  
10176  
915003  
544007  
576013  
460022  
576014  
540063  
540062  
540058  
3214  
933244  
448000  
544001  
25716  
BEARING, 6909 2RS  
SNAP RING, SH 177  
PULLEY, 4.45 10G 3V X 4.0 1A ...................................... 1 ......... 16" MODEL  
PULLEY, 4.1 10G 3V X 4.0 1A ........................................ 1 ......... 20" MODEL  
PULLEY, 3.6 10G 3V X 4.0 1A ........................................ 1 ......... 26, 30 & 36" MODELS  
SCREW, HHC 1/2-13 X 1 1/4  
WASHER, FLAT SAE 1/2 GRD 9YZ  
TENSIONER, IDLER ARM  
ADAPTOR, SHOULDER, FENNER DRIVE  
SCREW, MODIFIED 1/2-13 X 1 3/4  
PULLEY, W/BRG.4" A SECTION  
WASHER, FLAT SAE 3/8 GRD 9YZ  
1
2
1
1
1
1
2
540003  
933242  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY.  
DEPTH STOP METER/CABLE ASSY.  
PAGE 26 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY.  
DEPTH STOP METER/CABLE ASSY.  
NO  
1
PART NO  
25538  
PART NAME  
QTY. REMARKS  
DEPTH METER ASSY. ...................................................... 1 ...... INCLUDES ITEMS W/  
*
2
560025  
584025  
110031  
583059  
460019  
973752  
1618  
125039  
540011  
926149  
933240  
10024  
923201  
0131 A  
1579  
120243  
923116  
160013  
13287  
KNOB, SAW DEPTH INDICATOR  
STUD, 1/4-20X1 3/4" B7 NO PLATE  
POINTER, CONCRETE SAW DEPTH  
SHIM, 0.375 OD x 0.251 ID x 0.020 THICK  
FLANGE BEARING, 0.25 ID X 0.75 OD  
SCREW, BHSC,1/4-20 x 5/8 SS  
NUT, NYLOC 10-24  
U-BRACKET W/A, SAW DEPTH INDICATOR  
PULLEY, CABLE 1.25 OD  
SCREW, SHDLR 1/4D X 5/16L ,10-24,SCKT HD  
WASHER, FLAT SAE 1/4 GRD 9 YZ  
NUT, NYLOC 1/4-20  
SCREW, SHC 1/4-20 x 1/2  
SCREW, HHC 1/4-20 X 3/4  
SCREW, HHC 1/4-20 x 1/2  
TAB W/A, DEPTH INDICATOR  
SCREW, SHC 8-32 x 3/4  
1
1
1
5
1
1
3
1
8
6
4
2
1
1
1
1
2
1
2
1
1
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
10  
*
11  
12  
13  
14  
15  
16  
18  
19  
20  
21  
22  
23  
*
*
*
*
AXLE, INDICATOR SHEAVE  
NUT, NYLOC 8-32  
CABLE, DEPTH INDICATOR  
SPRING, EXTENSION, DEPTH INDICATOR  
440012  
565004  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DEPTH STOP CYLINDER/VALVE ASSY.  
DEPTH STOP CYLINDER/VALVE ASSY.  
PAGE 28 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DEPTH STOP CYLINDER/VALVE ASSY.  
DEPTH STOP CYLINDER/VALVE ASSY.  
NO  
1
2
3
4
5
6
7
8
PART NO  
25545  
169004  
966166  
965103  
583061  
25632  
446024  
446024-1  
35006  
368817  
35004  
PART NAME  
QTY.  
1
1
1
1
1
1
1
1
1
3
1
1
1
1
2
REMARK  
CYLINDER, SAW DEPTH STOP  
PIN, DEPTH STOP CYLINDER  
PIN, CLEVIS 3/4 x 2  
PIN, COTTER 5/32 x 1  
SPACER, DEPTH STOP CYLINDER  
FITTING, BLEEDER, DEPTH STOP  
VALVE, DEPTH STOP FLOW CONTROL  
PANEL MOUNT KIT, VALVE  
HOSE ASM, 36.2" #4HP w/ 370821/370821  
FITTING, 90 4MJ - 4MO  
HOSE ASM, 22.7" #4HP w/ 370895/370821  
FITTING, BRASS BREATHER VENT 1/4"  
FITTING, BRASS STR 2BARB-10-32  
WASHER, FLAT SAE 3/4 GRD 9 YZ  
SEAL, OIL CR# 9815  
9
10  
11  
12  
13  
14  
15  
25675  
25776  
933247  
480003  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BELT GUARD  
BELT GUARD  
PAGE 30 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BELT GUARD  
BELT GUARD  
NO  
1
2
3
4
5
6
7
PART NO  
PART NAME  
BELT GUARD W/A, CONCRETE SAW (RED)  
TAB W/A, SAW BELT GUARD  
WRENCH, 15/16" BLADE CLOSED END  
KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1  
SCREW, HHC 3/8-16 X 7/8  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
SCREW, HHC 3/8-16 X 1 1/4 GR 5  
QTY.  
REMARK  
204017  
125041  
584011  
15503  
0166  
933242  
1023  
1
1
1
1
6
7
1
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE ASSY.  
ENGINE ASSY.  
PAGE 32 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE ASSY.  
ENGINE ASSY.  
NO.  
1
1
PART NO.  
261002  
35396  
PART NAME  
QTY.  
REMARKS  
ENGINE, DEUTZ BF3L 1011FL 57HP TURBO DIESEL .................... 1........ TIER I  
ENGINE, DEUTZ BF3L 2011 60HP TURBO DIESEL ........................ 1........ TIER II  
5
6
7
8
306012  
304010  
267002  
205007  
367681  
366030  
35017  
946703  
933242  
TBD  
FILTER, OIL, DEUTZ  
FILTER, FUEL, DEUTZ  
1
1
1
1
1
1
1
1
1
1
1
1
FLYWHEEL, MODIFIED BF 3L 1011 FL  
PLATE, HANDLEBAR STOP  
FITTING, STR 8MJ-M18MO  
FITTING, PLUG 8MJ  
HOSE ASSY, 19.9” #8LP W/ 370677/370677  
SCREW, HHC M8-1.25 X 25MM GR10.9  
WASHER  
DIPSTICK  
OIL FILLER CAP  
BLOWER JACKET 57HP DEUTZ TD 04179632  
9
10  
11  
13  
15  
16  
17  
18  
TBD  
267009  
Tier I Deutz engine no longer available.  
Tier II Deutz engine replacement  
requires separate engine wiring harness,  
air intake assembly and breather tube  
(see next page).  
NOTE  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — AIR INTAKE HOSE ASSY.  
AIR INTAKE HOSE ASSY.  
PAGE 34 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — AIR INTAKE HOSE ASSY.  
AIR INTAKE HOSE ASSY.  
NO  
1
2
3
4
PART NO  
300010  
300007-1  
282003  
29218  
PART NAME  
QTY.  
REMARK  
AIR CLEANER, DONALDSON, W/90 DEG. BEND ..................1.......... INCLUDES ITEMS W/  
BAND, DONALDSON AIR CLEANER  
PREFILTER, ENGINE AIR 3"  
CLAMP, HOSE WORM #48 ......................................................4.......... TIER I  
CLAMP, HOSE WORM #48 ......................................................3.......... TIER II  
*
1
1
4
29218  
5
6
7
8
25625  
AIR INTAKE HOSE ASM  
HOSE, HUMP 3" x 2.75"  
TUBING, AIR CLEANER SPLICE  
TUBE, CRANCASE BREATHER, 57HP  
CLAMP, HOSE WORM # 36.....................................................1.......... TIER I ONLY  
CLAMP, HOSE WORM # 12, 11/16" TO 1- 1/4" ....................1.......... TIER I ONLY  
INDICATOR, ELECTRICAL SERVICE 30" H2O/7.5KPa  
FITTING, NIPPLE 1/8" MP  
CLAMP, HOSE WORM # 10.....................................................1.......... TIER I ONLY  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
SCREW, HHC 5/16-18 x 1-1/4  
NUT, NYLOC 5/16-18  
1
1
1
1
302009  
584036  
302012  
962017  
3333  
406018  
65516  
35216  
933241  
2623  
9
10  
11  
12  
15  
16  
17  
18  
19  
20  
21  
22  
23  
1
1
4
2
2
1
1
1
1
5283  
300010-1  
300009  
300008  
300010-2  
15538  
BODY, AIR FILTER  
*
AIR FILTER, SAFETY ELEMENT  
AIR FILTER, PRIMARY ELEMENT  
CAP, AIR FILTER  
*
*
*
CLAMP, HOSE WORM #6, 7/16-11/16 .....................................1.......... TIER II ONLY  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — MUFFLER KIT ASSY.  
MUFFLER KIT ASSY.  
PAGE 36 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — MUFFLER KIT ASSY  
MUFFLER KIT ASSY.  
NO  
1
2
3
4
5
6
PART NO  
280002  
285003  
570005  
106088  
0300 B  
280002  
PART NAME  
QTY.  
REMARK  
MUFFLER AND FLEX KIT ASSY.  
EXHAUST, 12" EXTENSION  
CLAMP, MUFFLER 2-1/2", 5/16" U-BOLT  
BRACKET W/A, DEUTZ MUFFLER SUPPORT  
WASHER, FLAT SAE 5/16  
FLEX KIT  
1
1
1
1
2
1
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE MOUNTING ASSY.  
ENGINE MOUNTING ASSY.  
PAGE 38 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE MOUNTING ASSY.  
ENGINE MOUNTING ASSY.  
NO.  
PART NO.  
25614  
25640  
PART NAME  
QTY.  
1
REMARKS  
1
TRUNNIONW/A, DEUTZ ENGINE  
TRUNNION W/A, CONCRETE SAW ENGINE FRONT  
MOUNT, ENGINE , RH REAR DEUTZ  
MOUNT,ENGINE, LH REAR DEUTZ  
SUPPORT ARM, RH DEUTZ ENGINE DRILLED  
SUPPORT ARM, LH DEUTZ ENGINE DRILLED  
WASHER, FLAT SAE 9/16 GRD 9 YZ  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
WASHER, FLAT SAE 3/4 GRD 9 YZ  
SCREW, HHC M14-2.0X55MM 10.9 NP  
SCREW, HHC 1/2-13 X 3-3/4GRD8  
SCREW, HHC 1/2-13 X 4 GD8  
*
2
3
1
1
1
1
1
4
8
4
4
2
2
4
2
1
2
1
*
120274  
120273  
120271  
120270  
933245  
933244  
933247  
940738  
915218  
16521  
915211  
915373  
120099-3  
938067  
936216  
583068  
9503  
*
4
5
*
*
6
7
*
*
8
9
*
*
10  
*
11  
*
12  
*
13  
*
SCREW, HHC 1/2-13 X 2 GR8YZ  
SCREW, HHC 3/4-10X5GRD 8  
TAP BOLT, 3/4-10 X 8 ZINC GR 8  
NUT, TOP LOCK 3/4-10 GR9YZ  
NUT, HEX JAM 3/4-10, ZINC  
WASHER, 1.5 OD X .68 ID X .25 THICK  
NUT, NYLOC 5/8-11  
14  
*
15  
*
16  
*
17  
*
18  
19  
2
2
*
*
20  
35335  
ENGINE MOUNTING KIT ..................................................... 1 ....... INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — POINTER ASSY.  
POINTER ASSY.  
PAGE 40 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — POINTER ASSY.  
POINTER ASSY.  
NO  
PART NO  
120094  
120095  
110038  
110044  
15503  
500005  
160004  
582008  
995366  
5070 B  
933241  
0202  
926006  
20473  
10133  
1456  
3233  
574003  
M10006  
PART NAME  
QTY.  
1
1
1
1
2
1
1
4
2
2
2
2
2
1
1
3
REMARK  
1
FRAME W/A, LH SAW POINTER  
FRAME W/A, RH SAW POINTER  
SAW POINTER, 15" LEFT FRONT  
POINTER, RIGHT FRONT 17 1/4"  
KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1  
WHEEL, POINTER, 6"X1"  
*
2
*
3
*
4
*
5
*
6
*
7
AXLE, POINTER WHEEL  
*
8
BUSHING, FLANGE, 1.0 OD x .75 ID  
SCREW, HHC 3/4-10x3-1/4YZ5  
NUT, NYLOC 3/4-10  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
SCREW, HHC 5/16-18 X 1 ZINC  
SCREW, SQHS, CP 1/4-20 x 1/2  
SCREW, HHC 3/8-16 x 3 FULL THREAD GR5  
NUT, NYLOC 3/8-16  
*
9
*
10  
*
11  
12  
13  
14  
15  
16  
17  
18  
20  
*
*
*
*
*
*
*
*
NUT, HEX FINISH 3/8-16  
WASHER, FENDER, 1.5OD X 3/8ID  
ROPE, POINTER ASSY.  
2
1
POINTER ASSY ......................................................................1.......... INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — GAUGES AND CONTROLS ASSY.  
GAUGES AND CONTROLS ASSY.  
PAGE 42 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — GAUGES AND CONTROLS ASSY.  
GAUGES AND CONTROLS ASSY.  
NO  
1
2
PART NO  
120222  
25634  
PART NAME  
BRACKET, DUETZ THROTTLE CABLE  
BULK HEAD ADAPTOR  
QTY.  
1
2
REMARK  
3
4
5
6
7
8
9
10  
11  
14  
15  
16  
17  
18  
19  
20  
21  
25624  
SWIVEL, CABLE END  
1
1
1
2
2
1
6
1
1
1
4
1
1
2
1
448004-1  
448004  
M940653  
15171  
SPACER, DEUTZTHROTTLE ACTUATOR ARM  
ARM, DEUTZTHROTTLE ACTUATOR  
SCREW, HHC M6-1.0 X 25MM GR10.9  
CABLE, PULL (THROTTLE/DRIVE ENGAGE)  
PIVOT END, CABLE  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
CAM LEVER, CONCRETE SAW  
SCREW, SHDLR 3/8D X 1/2L, 5/16-1,SCKT HD  
TACHOMETER, ELECTRIC 0-3000 RPM  
GROMMET. 1/2" ID  
INDICATOR, ENGINE  
VOLTMETER  
KEY, IGNITION  
IGNITION SWITCH W/KEYS  
584028  
933242  
448006  
926327  
421000  
579072  
406021  
423000  
406017-1  
406017  
406000  
406020  
SWITCH, ROCKER, CH# M-58031-01 ...................... 2 ......... AUX AND LIGHTS  
BLANK, ROCKER SWITCH COVER......................... 1 ......... AUX SWITCH NOT USED  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BATTERY ASSY.  
BATTERY ASSY.  
PAGE 44 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BATTERY ASSY.  
BATTERY ASSY.  
NO.  
PART NO.  
25597  
404006  
125051  
1023  
933242  
206011  
12832  
575001  
1665  
PART NAME  
QTY.  
REMARKS  
1
PLATFORM W/A, CONCRETE SAW BATTERY  
BATTERY, EXIDE ORB75DT-84  
CLIP W/A, BATTERY RETAINER  
SCREW, HHC 3/8-16 X 1-1/4 GR 5  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
PAD, RUBBER, CONCRETE SAW BATTERY  
WASHER, SNUBBING  
1
1
1
1
7
1
4
4
4
4
*
2
*
3
*
4
*
5
*
6
*
7
*
8
RUBBER ISOLATOR,TPC# 60166-1  
SCREW, HHC 3/8-16 X 2  
NUT, NYLOC 3/8-16  
*
9
*
10  
*
11  
10133  
25826  
BATTERY CABLE KIT ............................................... 1......... INCLUDES ITEMS W/  
#
12  
405061  
405060  
915101  
125042  
0131 A  
933240  
35199  
940692  
35038  
35039  
35040  
35041  
35042  
35043  
TERMINAL, NEGATIVE BATTERY, MARINE  
TERMINAL, POSITIVE BATTERY, MARINE  
SCREW, HHC 3/8-16 X 1/2 GRD8  
HOSE BRACKET W/A  
SCREW, HHC 1/4-20 X 3/4  
WASHER, FLAT SAE 1/4 GRD 9 YZ  
1
1
2
1
1
1
*
13  
*
14  
*
15  
*
16  
*
17  
*
19  
BATTERY AND MOUNTING ASSY............................ 1......... INCLUDES ITEMS W/  
*
20  
21  
SCREW, HHC M10-1.5 X 20MM  
CABLE ASSY, BATTERY  
CABLE ASSY, BATTERY  
CABLE ASSY, BATTERY  
CABLE ASSY, BATTERY  
CABLE ASSY, BATTERY  
CABLE ASSY, BATTERY  
1
1
1
1
1
1
1
#
#
#
#
#
#
*
22  
23  
24  
25  
26  
*
*
*
*
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — FRONT AXLE ASSY.  
FRONT AXLE ASSY.  
PAGE 46 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — FRONT AXLE ASSY.  
FRONT AXLE ASSY.  
NO.  
PART NO.  
16013-1  
480003  
2621  
500006  
576003  
460002  
912311  
933246  
4702  
PART NAME  
FRONT AXLE W/A, CONCRETE SAW  
SEAL, OIL CR# 9815  
FITTING, GREASE ZERK STR 1/4-28  
WHEEL, 8 x 3 URETHANE, NO BEARINGS  
SNAP RING- HO-185  
BEARING, BALL, KOYO # 6005 2RS  
SCREW, HHC 5/8-11 x 2  
QTY.  
REMARKS  
1
1
2
2
1
2
4
4
6
8
2
*
3
4
*
5
*
6
*
7
8
9
WASHER, FLAT 5/8 SAE GRD9 YZ  
NUT, HEX FINISH 5/8-11  
10  
11  
12  
13  
14  
15  
16  
17  
18  
M16020  
06505-008  
508005  
1579  
926064  
583096  
25599  
WHEEL, 8 x 3 WITH BEARINGS, ASSY. .................. 2......... INCLUDES ITEMS W/  
*
SCREW, HHC 5/8-11x1.00  
2
2
6
2
2
2
4
2
PLATE, WHEEL COVER  
SCREW, HHC 1/4-20 x .5  
SCREW, SQHS,CP 5/16-24 x 5/8  
BACKING PLATE, SAW AXLE PIVOT BEARING  
BEARING, FLANGE 1.13"IDx4.59"BB  
SCREW, HHC 5/8-11 x 1-1/2  
21376  
1162A  
CAP, GREASE ZERK #2 YELLOW  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DRIVE ASSY.  
DRIVE ASSY.  
PAGE 48 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — DRIVE ASSY.  
DRIVE ASSY.  
NO.  
PART NO.  
PART NAME  
TRANSAXLE, SAUER 230-3010L LOCKED  
SKID PLATE, TRANS-AXLE  
WHEEL, REAR 12"X3"X2" BORE  
BUSHING, 1.0" TRANSTORQUE KEYLESS  
PULLEY, 4.13 X A X 18 TOOTH SPLINE  
QTY.  
REMARKS  
1
263003  
206005  
500009  
582038  
540033- 4  
35190  
120078  
125040  
144003  
120260  
25617  
370192  
370162-1  
306006  
35226  
11722  
12431  
366692  
367470  
368699  
35014  
35015  
35018  
35019  
25976  
35012  
25623  
1
1
2
2
1
*
2
3
*
*
4
5
*
*
6
7
FAN GROUP ......................................................................... 1 ....... INCLUDES ITEMS W/%  
*
BACKING PLATE, SAW TRANSAXLE  
BRACKET, ALIGNMENT ADJUSTING  
RESERVOIR, HYDRAULIC OIL  
PLATE, HYDRAULIC OIL FILTER ADAPTER  
FILTER HEAD, TRANSAXLE  
FITTING, 45 8BEAD SHORT-6MO  
FITTING, 90 8BARB - 6MO  
FILTER, TRANSAXLE  
FITTING, 90 8 BEADED HOSE X 10MO  
FITTING, 90 6MJ-6MO  
2
1
1
1
1
3
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
8
8
2
4
2
4
4
2
5
2
1
1
1
1
1
1
1
*
8
9
*
*
10  
*
11  
*
12  
*
13  
*
14  
*
15  
*
16  
*
17  
*
FITTING, 90 8MJ-6MO  
FITTING, RUN TEE 6MJ - 6MJ - 6FJ  
FITTING, STR 4MJ - 6MO  
18  
*
19  
*
20  
*
FITTING, PLUG 6MO HEX SKT HD  
HOSE ASM, 36.2" #6LP W/ 370674/370922  
HOSE ASM, 59.3" #6LP W/ 370922  
HOSE ASM, 23.3" #8LP W/ 370900  
HOSE, 1/2 ID PUSHLOCK 250 PSI, 6"  
HOSE, 1/2 ID PUSHLOCK 250 PSI, 18.5"  
HOSE ASM, 17.9" #6LP W/ 370674  
CIRCLIP  
21  
*
22  
*
23  
*
24  
*
25  
*
26  
*
27  
*
28  
*
968011  
933244  
933242  
06501-028  
06500-020  
933241  
5283  
933076  
923201  
923202  
15538  
NUT, HEX FINISH 1/2-13  
29  
*
WASHER, FLAT SAE 1/2 GRD 9 YZ  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
SCREW, HHC 3/8-16 X 3-1/2  
SCREW, HHC 5/16-18 X 2-1/2  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
NUT, NYLOC 5/16-18  
WASHER, FLAT SAE #12 ZINC  
SCREW, SHC 1/4-20 X 1/2  
SCREW, SHC 1/4-20 X 5/8  
CLAMP, HOSE WORM # 6  
CLAMP, HOSE WORM # 2  
CLAMP, LOOM CUSHIONED #12  
STAND OFF, 1.00 HEX X 1.483  
FAN, 5-BLADE  
30  
*
31  
*
32  
*
33  
*
34  
*
35  
*
36  
*
37  
*
38  
*
39  
19473  
35025  
*
40  
*
41 % 583064  
*
42 % 384001  
*
43 % 923118  
44 % 933201  
45 % 933242  
46 % 933072  
SCREW, SHC 8-32X1 NP  
*
WASHER, FENDER 3/16 X 3/4 ZINC  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
WASHER, FLAT SAE #8 ZINC  
*
*
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADESHAFT AND MOUNTING ASSY.  
BLADESHAFT AND MOUNTING ASSY.  
PAGE 50 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADESHAFT AND MOUNTING ASSY.  
BLADESHAFT AND MOUNTING ASSY.  
NO.  
1
PART NO.  
35193  
PART NAME  
QTY.  
REMARKS  
BLADESHAFT AND MOUNTING GROUP, 6000 SERIES .........1...... INCLUDES ITEMS W/  
*
2
3
M15003  
35194  
120226  
120225  
120224  
923357  
16530  
933243  
06502-010  
168008  
162003  
576006  
925382  
486001  
485003  
480006  
480007  
578135  
460010  
39460011  
11721  
BLADESHAFT ASSY., SINGLE SPEED CONCRETE SAW ......1...... INCLUDES ITEMS W/%  
MOUNTING ASSY., 6000 SERIES ............................................1...... INCLUDES ITEMS W/#  
*
*
4 #  
MOUNTING BLOCK, BLADESHAFT W/PIN  
MOUNTING BLOCK, BLADESHAFT  
SADDLE CLAMP W/A 1.50X4.00 BLADESHAFT  
SCREW, SHC 7/16-14 X 1-1/4, NP  
SCREW, HHC 7/16-14 X 1  
WASHER, FLAT SAE 7/16 GRD 9 YZ  
SCREW, HHC 7/16-14 X 1-1/4  
HOUSING, SINGLE SPEED BLADESHAFT  
BLADE SHAFT, SINGLE SPEED  
SNAP RING, ROTO CLIP # SH-196  
SCREW, SHS,KP 1/4-20 X 1/2  
THRUST WASHER, 6000 SERIES  
SLEEVE, BLADE SHAFT SEAL  
SEAL, OIL CR# 28655  
OIL SEAL, JOINT RADIAL  
O-RING, VITON # AS-135  
BEARING, ROLLER KOYO # 7210BGC3  
BEARING, BALL KOYO # NU2210RC3  
FITTING, STR 6MJ-6M0  
KEY, WOODRUFF, #807  
DRAIN PLUG, MAGNETIC, 1/2-20  
GASKET, DRAIN PLUG  
1
1
2
4
2
6
4
1
1
2
6
2
2
2
2
2
2
1
2
2
1
1
*
5 #  
*
6 #  
*
7 #  
*
8 #  
*
9 #  
*
10 #  
*
11 %  
*
12 %  
*
13 %  
*
14 %  
*
15 %  
*
16 %  
*
17 %  
*
18 %  
*
19 %  
*
20 %  
*
21 %  
*
22 %  
*
23 %  
*
927048  
583026  
577009  
35254  
24 %  
*
25 %  
*
26 %  
*
SENDER ASM, TACHOMETER SIGNAL GENERATOR ............1....... INCLUDES ITEMS W/+  
GEAR, SAW BLADE SHAFT SPEED PICKUP  
COLLAR ASM, OUTER BLADE SHAFT ....................................2....... INCLUDES ITEMS W/@  
27 %  
*
25690  
1
28 %  
180003  
180004  
582012  
915316  
25695  
915315  
576007  
421001  
12171  
*
29 %  
COLLAR, INNER BLADE SHAFT  
BUSHING, QUICK DISCONNECT BLADE SHAFT  
SCREW, HHC 5/8-11X 3 LH GR8  
WASHER, SEAL 3/4”  
SCREW, HHC 5/8-11X3 GR8  
SNAP RINGVH0-354  
GENERATOR, TACHOMETER SIGNAL  
SEAL, WEATHERPACK 16-18 GA, GREEN  
TERMINAL, WEATHERPACK MALE 14-16 GA  
CONNECTOR, WEATHERPACK 2 MALE PIN  
PIN, DOWEL 3/8 - 1-3/4  
2
2
1
1
1
1
1
2
2
1
2
2
*
30 %  
*
31 %  
*
32 %  
*
33 %  
*
34 %  
*
35 %+  
*
36 %+  
*
37 %+  
12179  
12176  
*
38 %+  
*
39 %@ 926790  
*
40 %@ 180003-1  
COLLAR, OUTER BLADE SHAFT  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — LIGHT CONNECTOR/DASH PANEL ASSY.  
LIGHT CONNECTOR/DASH PANEL ASSY.  
PAGE 52 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — LIGHT CONNECTOR/DASH PANEL ASSY.  
LIGHT CONNECTOR/DASH PANEL ASSY.  
NO.  
1
2
3
4
PART NO.  
933241  
0655  
104016  
13287  
923114  
405000  
25865-1  
25865-2  
12171  
PART NAME  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
SCREW, HHC 5/16-18 X 3/4  
COVER W/A, CONCRETE SAW DASH PANEL  
NUT, NYLOC 8-32  
SCREW, SHC 8-32 x 1/2  
CONNECTOR, 4-WAY SOCKET CHROME  
WIRE, BLACK #14  
WIRE, BLACK #14  
SEAL, WEATHERPACK 16-18 GA , GREEN  
TERMINAL, WEATHERPACK MALE 14-16 GA  
CONNECTOR, WEATHERPACK 2 PIN MALE  
QTY.  
REMARKS  
7
7
1
2
2
1
?
?
2
2
1
5
6
*
8
9
*
*
10  
*
11  
12179  
12176  
25865  
*
12  
*
13  
HARNESS, LIGHT KIT .............................................. 1......... INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE GUARD ASSY.  
ENGINE GUARD ASSY.  
PAGE 54 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE GUARD ASSY.  
ENGINE GUARD ASSY.  
NO.  
1
2
3
4
PART NO.  
205010  
2691  
933244  
0166  
PART NAME  
GUARD W/A CONCRETE SAW ENGINE  
SCREW, HHC 1/2-13 X1"  
WASHER, FLAT SAE 1/2" GRD 9 YZ  
SCREW, HHC 3/8-16 X 7/8"  
WASHER, FLAT SAE 3/8" GRD 9 YZ  
QTY.  
REMARKS  
1
1
1
2
1
5
933242  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADE GUARD MOUNT/WIPER ASSY.  
BLADE GUARD MOUNT/WIPER ASSY.  
PAGE 56 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADE GUARD MOUNT/WIPER ASSY.  
BLADE GUARD MOUNT/WIPER ASSY.  
NO.  
PART NO.  
206006  
120093  
120091  
120092  
120090  
100019  
5283  
PART NAME  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
STRIPS, SLURRY  
2
1
1
1
1
2
8
8
6
SPACER, RH BLADE CLIP  
SPACER, LH BLADE CLIP  
CLIP, RH BLADEGUARD MOUNT  
CLIP, LH BLADEGUARD MOUNT  
BACKING PLATE, CONCRETE SAW  
NUT, NYLOC 5/16-18  
0202  
924289  
SCREW, HHC 5/16-18 X 1 ZINC  
SCREW, FHSC 3/8-16 X 1-3/4  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — LOWER BELT GUARD ASSY.  
LOWER BELT GUARD ASSY.  
PAGE 58 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — LOWER BELT GUARD ASSY.  
LOWER BELT GUARD ASSY.  
NO.  
PART NO.  
202001  
583091  
583092  
933244  
3214  
PART NAME  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
GUARD W/A, LOWER BELT  
STRAP, LOWER BELT GUARD  
WASHER, LOWER BELT PROTECTOR  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
SCREW, HHC 1/2-13 X 1 1/4  
1
1
1
4
4
35198  
GUARD, LOWER BELT PROTECTOR KIT, 6000 ....................1.......... INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — HANDLE AND LIGHT ASSY.  
HANDLE AND LIGHT ASSY.  
PAGE 60 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — HANDLE AND LIGHT ASSY.  
HANDLE AND LIGHT ASSY.  
NO.  
PART NO.  
15503  
120206  
405001  
TBD  
PART NAME  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
7
8
9
KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1  
LIGHT BAR W/A, CONCRETE SAW  
CONNECTOR, PLUG, 4 PIN FEMALE  
WASHER, LOCK  
1
1
1
1
1
2
2
2
1
2
1
1
2
TBD  
NUT  
560023-1  
560024  
923199  
574002  
35359  
405002  
2532  
HANDLE BAR, CONCRETE SAW  
KNOB W/A, HANDLEBAR  
SCREW, SHC 8-32 X 1-1/4  
CAM CLEAT  
TERMINAL,FEM-SMALL 16-18 GA  
CORD, LIGHT-EXTENDABLE  
LIGHT ASSY.,RECTANGULAR COMP.  
GRIP HANDLE BAR  
10  
*
11  
*
12  
*
13  
560017  
M18004  
14  
LIGHT KIT ........................................................................ 1 .......... INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — REAR POINTER AND FOOT REST ASSY.  
REAR POINTER AND FOOT REST ASSY.  
PAGE 62 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — REAR POINTER AND FOOT REST ASSY.  
REAR POINTER AND FOOT REST ASSY.  
NO.  
1
2
3
4
PART NO.  
560029  
933241  
0202  
110020  
0205  
PART NAME  
QTY.  
REMARKS  
FOOT REST  
1
2
2
1
1
WASHER, FLAT 5/16" YZ9  
SCREW, HHC 5/16"-18 X 1 ZINC  
REAR POINTER  
5
HCS, 3/8-16 X1  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — CONSOLE MOUNTING ASSY.  
CONSOLE MOUNTING ASSY.  
PAGE 64 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — CONSOLE MOUNTING ASSY.  
CONSOLE MOUNTING ASSY.  
NO.  
1
2
PART NO.  
102040  
100025  
M18011  
EM963105  
2549  
933244  
3214  
933244  
16530  
PART NAME  
CONSOLE, 6057 CONCRETE SAW  
FRAME PLATFORM ASSY, 6057 CONCRETE SAW  
WEIGHT KIT, 6000-6400 SERIES ....................................... 1........ INCLUDES ITEMS W/  
SCREW, HHC 1/2-13 X 2  
QTY. REMARKS  
1
1
3
*
4
*
4
*
5
*
6
7
8
9
3
3
3
4
4
2
2
SCREW, HHC 1/2-13 X 3  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
SCREW, HHC 1/2-13 X 1 1/4  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
SCREW, HHC 7/16-14 X 1  
933243  
WASHER, FLAT SAE 7/16 GRD 9 YZ  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — CABLE MOUNT ASSY.  
CABLE MOUNT ASSY.  
PAGE 66 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — CABLE MOUNT ASSY.  
CABLE MOUNT ASSY.  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
35203  
PART NAME  
CABLE MOUNT GROUP,6000-6400  
PULLY, POINTER ROPE  
QTY.  
REMARKS  
1
1
1
1
2
2
1
2
1
1
1
1
1
540039  
544002  
125043-3  
940674  
933241  
0948  
10136  
939654  
4514  
SHOULDER, ADAPTER  
RETAINER, SAW POINTER CABLE  
SCREW, HHC M8-1.25 X 30MM GRADE 10.9  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
WASHER, FLAT SAE 1/4  
WASHER, FLAT SAE 3/8  
9
SCREW, SHC M12-1.75x30MM 12.9 NP  
SCREW, HHC 1/4-20 X 5/8 GR 5  
SCREW, HHC 3/8-16 X 2  
NUT, NYLOC 3/8-16  
MOUNT W/A CABLE GUIDE  
10  
11  
12  
13  
1665  
10133  
125043  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 SAW — OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)  
OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)  
PAGE 68 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 SAW — OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)  
OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)  
NO.  
1
PART NO.  
35030  
PART NAME  
OPTIONAL FLANGE GUARD, RIGHT-SIDE  
QTY.  
1
REMARKS  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADE GUARD ASSY.  
BLADE GUARD ASSY.  
PAGE 70 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADE GUARD ASSY.  
BLADE GUARD ASSY.  
NO  
1
1
1
1
1
2
3
3
4
4
4
4
4
5
6
7
PART NO  
25916  
25917  
25918  
25919  
25920  
10176  
582040  
582039  
362000  
362005  
362006  
362007  
362008  
923144  
362003  
1618  
PART NAME  
QTY.  
REMARK  
BLADE GUARD 16-INCH  
BLADE GUARD 20-INCH  
BLADE GUARD 26-INCH  
BLADE GUARD 30-INCH  
BLADE GUARD 36-INCH  
NUT, NYLOCK 1/2-13  
BUSHING, BLADE GUARD  
1
1
1
1
1
1
1
BUSHING, BLADE GUARD ...................................... 2 ................. 30 AND 36-INCH ONLY  
HOSE, WATER #6LP  
HOSE, WATER #6LP  
HOSE, WATER #6LP  
HOSE, WATER #6LP  
HOSE, WATER #6LP  
SCREW, SHC 10-24X1/2  
TUBE, WATER, LH SIDE W/A  
NUT, NYLOCK 10-24  
WASHER, FENDER 1/4" X1-1/4" ZINC  
NUT, NYLOCK 1/4"-20  
FLAP, MUD BLADE GUARD  
SCREW, HHC 1/4"-20 X 3/4"  
WATER MANIFOLD  
WATER MANIFOLD .................................................. 1 ................. 30 AND 36-INCH ONLY  
SCREW, HHC 1/4"-20 X1-3/4"  
TUBE, WATER, RH SIDE W/A  
FITTING, QD MALE SNAPTITE PHN4 1/4" MP  
FITTING, PLUG 1/8" MP HEX SKT HD  
FITTING, STR 6BARB-1/8" MP  
SCREW, HHC 1/2-13 X3-1/4"  
SCREW, HHC 1/2-13 X3-3/4" .................................... 1 ................. 30 AND 36-INCH ONLY  
FITTING, QD FEM SNAPTITE PHC4-4F  
2
2
2
2
2
4
1
4
1
3
1
1
1
9
10930  
10024  
10  
11  
12  
13  
13  
14  
15  
16  
17  
18  
19  
19  
20  
200019  
0131 A  
445002  
445003  
26250  
362002  
320010  
2113  
370456  
06503-026  
06503-030  
320009  
2
1
1
1
2
1
1
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW—WIRING HARNESS/CIRCUIT BREAKER ASSY.  
WIRING HARNESS/CIRCUIT BREAKER ASSY.  
PAGE 72 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW—WIRING HARNESS/CIRCUIT BREAKER ASSY.  
WIRING HARNESS/CIRCUIT BREAKER ASSY.  
NO.  
1
2
3
4
5
6
7
PART NO.  
933242  
10133  
406012  
25935  
933076  
923201  
406019  
PART NAME  
QTY.  
REMARKS  
WASHER  
1
1
1
3
2
2
3
NUT, NYLOC 3/8-16  
MOUNTING BAR, CIRCUIT BREAKER  
NUT, HEX 10-32 W/STAR WASHER  
WASHER, FLAT SAE #12 ZINC  
SCREW, SHC 1/4-20 X 1/2  
CIRCUIT BREAKER, 10 AMP  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — WATER PUMP KIT ASSY.  
WATER PUMP KIT ASSY.  
PAGE 74 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — WATER PUMP KIT ASSY.  
WATER PUMP KIT ASSY.  
NO.  
PART NO.  
342000  
12176  
406000  
366057  
25931  
540003  
544002  
25948  
369970  
120089  
35080  
35081  
521008  
35005  
16693  
0205  
PART NAME  
QTY. REMARKS  
1
PUMP, WATER JABSCO  
1
1
1
2
3
1
1
1
1
1
1
1
1
1
1
2
4
2
2
2
1
*
2
3
CONNECTOR, WEATHERPACK 2 MALE PIN  
SWITCH, ROCKER, CH# M-58031-01  
FITTING, BRASS 1/2FP-1MP  
FITTING, 90 8BARB - 1/2 MP (4390-8-8)  
PULLEY, W/BRG. 4” A SECTION  
SHOULDER, ADAPTER  
NUT, COUPLING 3/8 - 16 X 1.4  
FITTING, PETCOCK RAD DRAIN 1/4MP  
PLATE, WATER PUMP BACKING, W/A  
HOSE, #8LP-40”  
HOSE, #8LP-14.75  
V BELT, AX-46  
HOSE ASSY, 42.5” #6LP W/ 370674/370922  
BOLT, CARRAGE 3/8-16 X 2  
SCREW, HHC 3/8-16 X 1.0  
*
*
4
5
*
*
6
7
*
*
8
9
*
*
10  
*
11  
*
12  
*
13  
*
14  
*
15  
*
16  
*
17  
*
933242  
1023  
12179  
12171  
13832  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
SCREW, HHC 3/8-16 X 1 1/4 GR 5  
TERMINAL, WEATHERPACK MALE 14-16 GA  
SEAL, WEATHERPACK 16-18 GA, GREEN  
WASHER, SNUBBING  
18  
19  
*
*
20  
*
21  
*
22  
M18042  
WATER PUMP KIT, 6057 ...........................................................1....... INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — GLOW PLUG KIT ASSY.  
GLOW PLUG KIT ASSY.  
NOte  
Tier 1 Engine Only  
NOTE  
PAGE 76 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — GLOW PLUG KIT ASSY.  
GLOW PLUG KIT ASSY.  
NO.  
PART NO.  
400000  
409000  
35249  
25992  
2203  
PART NAME  
SOLENOID, 12VDC  
GLOW PLUG  
CABLE ASM, BATTERY  
SCREW, SHC 12-24 X 1/2  
WASHER  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
1
1
1
2
2
M18007  
GLOW PLUG KIT............................... 1 ...............INCLUDES ITEMS W/  
*
Tier 1 Engine Only  
NOTE  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADESHAFT SEAL KIT ASSY.  
BLADESHAFT SEAL KIT ASSY.  
PAGE 78 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BLADESHAFT SEAL KIT ASSY.  
BLADESHAFT SEAL KIT ASSY.  
NO  
PART NO  
576006  
925382  
480006  
480007  
578135  
TBD  
PART NAME  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
SNAP RING, SH-196  
SCREW, SHS 1/4-20 X 1/2  
SEAL, OIL CR-28655  
SEAL, OIL CR-19599  
O-RING, SIZE 135, VITON  
2
6
1
2
2
KIT, SEAL ............................................... 1 ...................... INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BUSHING EXTENSION KITS ASSEMBLY  
BUSHING EXTENSION KITS ASSEMBLY  
PAGE 80 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — BUSHING EXTENSION KITS ASSEMBLY  
BUSHING EXTENSION KITS ASSEMBLY  
NO.  
PART NO.  
926949  
180003  
582032  
90123445  
915319  
18501  
926950  
180003  
582033  
90123445  
915319  
18502  
PART NAME  
DOWEL PIN, 3/8" X 2-1/4  
COLLAR, OUTER  
QD BUSHING, 3/8" - 3/4"  
5/8"-11 X 4 LH HEX BOLT  
5/8"-11 X 4 RH HEX BOLT  
BUSHING EXTENSION KIT (.375" — .75") ............. 1 ........... INCLUDES ITEMS W/  
DOWEL PIN, 3/8" X 2-1/2  
COLLAR, OUTER  
QD BUSHING, 3/4" - 1-1/8  
5/8"-11 X 4 LH HEX BOLT  
5/8"-11 X 4 RH HEX BOLT  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
1
1
1
1
1
*
7
8
9
10  
11  
12  
#
#
#
#
#
1
1
1
1
1
BUSHING EXTENSION KIT (.75" — 1.125") ........... 1 ........... INCLUDES ITEMS W/  
#
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE BLOCK HEATER ASSY. (OPTION)  
ENGINE BLOCK HEATER ASSY. (OPTION)  
PAGE 82 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — ENGINE BLOCK HEATER ASSY. (OPTION)  
ENGINE BLOCK HEATER ASSY. (OPTION)  
NO.  
1
PART NO.  
M18008  
PART NAME  
HEATER, ENGINE BLOCK, DEUTZ  
QTY.  
REMARKS  
1
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — COLLAR/FLANGE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
PAGE 84 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — COLLAR/FLANGE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
NO.  
PART NO.  
584037  
584038  
2549  
25138  
18503  
PART NAME  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
OUTER PULLER  
1
1
2
1
PLATE, PULLER  
SCREW, HHC 1/2"-13 X3  
SCREW, HHC 5/8"-11 X5 TAP  
COLLAR/FLANGE PULLER ASSY. ... 1 ...............INCLUDES ITEMS W/  
*
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — SEAL SLEEVE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
PAGE 86 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SP-6057 CONCRETE SAW — SEAL SLEEVE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
NO.  
1
2
3
*
4
5
*
6
*
7
*
8
*
9
PART NO.  
35163  
M18505  
35162  
584049  
35161  
937980  
35164  
PART NAME  
QTY.  
REMARKS  
SCREW, HHC 3/8 – 16 X 4 FULL THREAD  
1
SEAL SLEEVE & THRUST WASHER PULLER ASSY........ 1 ........... INCLUDES ITEMS W/  
*
SCREW, 10 - 24 X 6 FULL THREAD  
SEAL INSTALLATIONTOOL  
SCREW, 10 - 24 X 12 FULL THREAD  
NUT, WELD 10 - 24  
SCREW, HHC 1/4 – 20 X 5  
SCREW, HHC 1/4 – 20 X 10  
TOOL, SEAL REMOVAL  
2
1
2
2
3
3
1
35165  
584050  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Effective: October 1, 2002  
TERMS AND CONDITIONS OF SALE — PARTS  
PAYMENT TERMS  
5. Partsmustbeinnewandresalablecon- Multiquipreservestherighttoquoteandsell  
dition,intheoriginalMultiquippackage(if directtoGovernmentagencies,andtoOriginal  
any), and with Multiquip part numbers Equipment Manufacturer accounts who use  
Terms of payment for parts are net 30 days.  
FREIGHTPOLICY  
clearlymarked.  
our products as integral parts of their own  
products.  
All parts orders will be shipped collect or  
prepaidwiththechargesaddedtotheinvoice.  
All shipments are F.O.B. point of origin.  
Multiquip’sresponsibilityceaseswhenasigned  
manifesthasbeenobtainedfromthecarrier,  
andanyclaimforshortageordamagemustbe  
settledbetweentheconsigneeandthecarrier.  
6. Thefollowingitemsarenotreturnable:  
SPECIALEXPEDITINGSERVICE  
a. Obsolete parts. (If an item is in the  
price book and shows as being re- A$35.00surchargewillbeaddedtotheinvoice  
placedbyanotheritem,itisobsolete.) forspecialhandlingincludingbusshipments,  
insuredparcelpostorincaseswhereMultiquip  
mustpersonallydeliverthepartstothecarrier.  
(such as gaskets, seals, “O” rings,  
b. Any parts with a limited shelf life  
andotherrubberparts)thatwerepur- LIMITATIONSOFSELLER’SLIABILITY  
MINIMUMORDER  
chasedmorethansixmonthspriorto  
thereturndate.  
Multiquip shall not be liable hereunder for  
damagesinexcessofthepurchasepriceofthe  
The minimum charge for orders from Mul-  
tiquipis$15.00net.Customerswillbeasked  
for instructions regarding handling of orders  
notmeetingthisrequirement.  
c. Anylineitemwithanextendeddealer item with respect to which damages are  
netpriceoflessthan$5.00.  
claimed, and in no event shall Multiquip be  
liable for loss of profit or good will or for any  
otherspecial,consequentialorincidentaldam-  
ages.  
d. Special order items.  
RETURNEDGOODSPOLICY  
e. Electricalcomponents.  
f. Paint,chemicals,andlubricants.  
g. Decalsandpaperproducts.  
h. Itemspurchasedinkits.  
Returnshipmentswillbeacceptedandcredit  
willbeallowed,subjecttothefollowingprovi-  
sions:  
LIMITATIONOFWARRANTIES  
Nowarranties,expressorimplied,aremade  
in connection with the sale of parts or trade  
accessoriesnorastoanyenginenotmanufac-  
tured by Multiquip. Such warranties made in  
connectionwiththesaleofnew,completeunits  
are made exclusively by a statement of war-  
rantypackagedwithsuchunits,andMultiquip  
neitherassumesnorauthorizesanypersonto  
assume for it any other obligation or liability  
whatever in connection with the sale of its  
products.Apartfromsuchwrittenstatementof  
warranty, there are no warranties, express,  
impliedorstatutory,whichextendbeyondthe  
descriptionoftheproductsonthefacehereof.  
1. AReturnedMaterialAuthorizationmust  
be approved by Multiquip prior to ship-  
ment.  
7. Thesenderwillbenotifiedofanymaterial  
receivedthatisnotacceptable.  
2. ToobtainaReturnMaterialAuthorization,  
alistmustbeprovidedtoMultiquipParts  
Salesthatdefinesitemnumbers,quanti-  
ties, and descriptions of the items to be  
returned.  
8. Suchmaterialwillbeheldforfiveworking  
days from notification, pending instruc-  
tions.Ifareplyisnotreceivedwithinfive  
days,thematerialwillbereturnedtothe  
senderathisexpense.  
a. Thepartsnumbersanddescriptions  
must match the current parts price  
list.  
9. Creditonreturnedpartswillbeissuedat  
dealer net price at time of the original  
purchase,lessa15%restockingcharge.  
b. The list must be typed or computer  
generated.  
10. In cases where an item is accepted, for  
which the original purchase document  
can not be determined, the price will be  
basedonthelistpricethatwaseffective  
twelvemonthspriortotheRMAdate.  
c. The list must state the reason(s) for  
thereturn.  
d. The list must reference the sales  
order(s)orinvoice(s)underwhichthe  
itemswereoriginallypurchased.  
11. Credit issued will be applied to future  
purchasesonly.  
e. The list must include the name and  
phonenumberofthepersonrequest-  
ingtheRMA.  
PRICINGANDREBATES  
Prices are subject to change without prior  
notice.Pricechangesareeffectiveonaspe-  
cificdateandallordersreceivedonorafterthat  
datewillbebilledattherevisedprice.Rebates  
3. AcopyoftheReturnMaterialAuthoriza-  
tionmustaccompanythereturnshipment.  
4. Freight is at the sender’s expense. All forpricedeclinesandaddedchargesforprice  
partsmustbereturnedfreightprepaidto increaseswillnotbemadeforstockonhand  
Multiquip’sdesignatedreceivingpoint.  
atthetimeofanypricechange.  
PAGE 88 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE PAGE  
SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS MANUAL  
HERE'S HOW TO GET HELP  
PLEASE HAVETHE MODEL AND SERIAL  
NUMBER ON-HANDWHEN CALLING  
UNITED STATES  
Multiquip Corporate Office  
18910 Wilmington Ave.  
Carson, CA 90746  
MQ Parts Department  
Tel. (800) 421-1244  
800-427-1244  
310-537-3700  
Fax:800-672-7877  
Fax:310-637-3284  
Fax (800) 537-3927  
Contact: [email protected]  
Mayco Parts  
800-306-2926  
310-537-3700  
Warranty Department  
800-421-1244, Ext. 279 Fax:310-537-1173  
310-537-3700, Ext. 279  
Fax:800-672-7877  
Fax:310-637-3284  
Service Department  
800-421-1244  
Technial Assistance  
800-478-1244  
Fax:310-537-4259  
Fax:310-631-5032  
310-537-3700  
^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668  
MEXICO  
MQ Cipsa  
UNITED KINGDOM  
Multiquip (UK) Limited Head Office  
Carr. Fed. Mexico-Puebla KM 126.5  
Momoxpan, Cholula, Puebla72760Mexico  
Contact:p[email protected]  
Tel: (52) 222-225-9900  
Fax: (52) 222-285-0420  
Hanover Mill, Fitzroy Street,  
Ashton-under-Lyne,  
Lancashire OL7 0TL  
Tel: 0161 339 2223  
Fax: 0161 339 3226  
Contact:s[email protected]  
CANADA  
Multiquip  
BRAZIL  
Multiquip  
4110IndustrielBoul.  
Laval, Quebec, Canada H7L 6V3  
Contact:j[email protected]  
Tel: (450) 625-2244  
Fax: (450) 625-8664  
Av. Evandro Lins e Silva, 840 - grupo 505 Tel: 011-55-21-3433-9055  
Barra de Tijuca - Rio de Janeiro Fax: 011-55-21-3433-9055  
Contact:[email protected],s[email protected]  
© COPYRIGHT 2005, MULTIQUIP INC.  
Multiquip Inc, the MQ logo and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other  
trademarks are the property of their respective owners and used with permission.  
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.  
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations are based on the MQ SP4 Saw. Illustrations,  
descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to  
discontinue or change specifications, design or the information published in this publication at any time without notice and without incurring any obligations.  
Your Local Dealer is:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Multiquip Automobile Parts MTR40F User Manual
Multiquip Portable Generator dca 60ssai User Manual
Multiquip Portable Generator DCA150SSI User Manual
Multiquip Water Pump qp 402h User Manual
Multiquip Webcam b46s90 User Manual