PARTS MANUAL
SERIES
MODEL WM-90S (STEEL)
MODEL WM-90P (PLASTIC)
PLASTER AND MORTAR MIXER
(GASOLINE ENGINE/ELECTRIC MOTOR)
Revision #6 (03/04/08)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine exhaust and some of
its constituents, and some dust created
by power sanding, sawing, grinding,
drillingandotherconstructionactivities
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.
Some examples of these chemicals are:
Leadfromlead-basedpaints.
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfromchemically
treatedlumber.
Your risk from these exposures varies,
dependingonhowoftenyoudothistype
of work. To reduce your exposure to
these chemicals: ALWAYS work in a
well ventilated area, and work with
approved safety equipment, such as
dust masks that are specially designed
to filter out microscopic particles.
PAGE 2 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90 S/P PLASTER/MORTAR MIXER — TABLE OF CONTENTS
MQ-WHITEMAN — WM-90S/P
HONDA GX240K1HA2 ENGINE
Air Cleaner Assembly........................................30-31
Camshaft Assembly ..........................................32-33
Carburetor Assembly ........................................34-35
Control Assembly ..............................................36-37
Crankcase Cover Assembly..............................38-39
Crankshaft Assembly ........................................40-41
Cylinder Barrel Assembly..................................42-43
Cylinder Head Assembly ...................................44-45
Fan Cover Assembly .........................................46-47
Flywheel Assembly ...........................................48-49
Muffler Assembly ..............................................50-51
Fuel Tank Assembly ..........................................52-53
Ignition Coil .......................................................54-55
Piston Assembly................................................56-57
Recoil Starter ....................................................58-59
Gear Reduction Assembly ................................60-61
Label Assembly.................................................62-63
Plaster/Mortar Mixer
Here's How To Get Help ........................................... 2
Table Of Contents .................................................... 3
Parts Ordering Procedures ...................................... 4
Explanation of Code In Remarks Column................ 6
Suggested Spare Parts ............................................ 7
Component Drawings
Nameplate and Decals..........................................8-9
Frame Assembly ...............................................10-11
Paddle Shaft Assembly .....................................12-13
Steel Drum Assembly........................................14-15
Plastic Drum Assembly .....................................16-17
Drum & Paddle Shaft Complete Assy. (Poly) .....18-19
Drum & Paddle Shaft Complete Assy. (Steel) ...20-21
Axle Assembly ...................................................22-23
Engine Assembly ..............................................24-25
Electric Motor Assembly....................................26-27
Cabinet Assembly .............................................28-29
Terms and Conditions of Sale — Parts .................. 64
Specifications and are
subject to change
without notice.
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
Order via Internet (Dealers Only)
Orderpartson-lineusingMultiquip’sSmartEquipwebsite!
:
If you have an MQ Account, to obtain a
Username and Password, E-mail us at:
■
■
■
View Parts Diagrams
Order Parts
PrintSpecificationInformation
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
Gotowww.multiquip.comandclickon
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only)
:
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
1-800-427-1244
Order via Phone:
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
❒
Specify Preferred Method of Shipment:
❒
❒
❒
❒
❒
❒
Dealer Account Number
✓
UPS/Fed Ex
✓ DHL
Dealer Name and Address
■
■
Priority One
Ground
✓
Truck
Shipping Address (if different than billing address)
Return Fax Number
Applicable Model Number
■ Next Day
■
Second/ThirdDay
Quantity, Part Number and Description of Each Part
All orders are treated asStandard Orders
andwillshipthesamedayifreceivedprior
to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
PAGE 4 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
QTY. Column
remarks used in the Parts section of this manual. Use the help
numbers found on the back page of the manual if there are any
questions.
Numbers Used - Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other parts
that are sold in bulk and cut to length.
The contents and part numbers listed in the parts section are
subject to change without notice. Multiquip does not
guarantee the availibility of the parts listed.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the “Remarks”
Column.
REMARKS Column
Sample Parts List:
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed to
describe the item can also be shown.
NO. PART NO. PART NAME
QTY. REMARKS
1
2
2
3
4
12345
BOLT ...................... 1 ......INCLUDES ITEMS W/
WASHER, 1/4 IN. .............NOT SOLD SEPARATELY
WASHER, 3/8 IN. ... 1 ......MQ-45T ONLY
HOSE ................... A/R ....MAKE LOCALLY
BEARING ............... 1 ......S/N2345B AND ABOVE
*
*
*
12347
12348
12349
Assembly/Kit - All items on the parts list with the same
unique symbol will be included when this item is purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
NO. Column
Unique Symbols - All items with same unique symbol
Serial Number Break - Used to list an effective serial
number range where a particular part is used.
( , #,
+
, %, or >) in the number column belong to the same
*
assembly or kit, which is indicated by a note in the “Remarks”
column.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXXTO S/N XXX”
Duplicate Item Numbers - Duplicate numbers indicate
multiple part numbers are in effect for the same general
item, such as different size saw blade guards in use or a
part that has been updated on newer versions of the same
machine.
Specific Model Number Use - Indicates that the part is
used only with the specific model number or model number
variant listed. It can also be used to show a part is NOT
used on a specific model or model number variant.
When ordering a part that has more than one
item number listed, check the remarks column
for help in determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” - Indicates that the part can be
purchased at any hardware shop or made out of available
items. Examples include battery cables, shims, and certain
washers and nuts.
PART NO. Column
Numbers Used - Part numbers can be indicated by a
number, a blank entry, orTBD.
“Not Sold Separately” - Indicates that an item cannot be
purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available for
sale through Multiquip.
TBD (To Be Determined) is generally used to show a part
that has not been assigned a formal part number at time of
publication.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will be
clarified in the “Remarks” Column.
PAGE 6 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — SUGGESTED SPARE PARTS
WM-90P/S PLASTER AND MORTAR MIXER 1 TO 3
UNITSWITH HONDA GX240K1HA2 ENGINE
Part numbers on this
Suggested Spare Parts List
may supercede/replace the P/
N's shown in the test pages of
this manual.
Qty.... P/N ...................... Description
NOTE
6 ....... 505834 ................ V-BELT A36 HONDA ENGINE
6 ....... 491112 ................ V-BELT A40 ELECTRIC MOTOR
2 ....... EM914288 ........... OIL SEAL, AXLE
4 ....... EM903113 ........... BEARING, CONE, AXLE
4 ....... EM903112 ........... BEARING, CUP, AXLE
2 ....... 20654-001 ........... SEAL, PADDLE SHAFT (BLACK)
2 ....... 530029 ................ RING, RETENTION
2 ....... 20104-002 ........... SEAL, SHAFT URETHANE (YELLOW)
3 ....... 17210ZE2515 ...... ELEMENT, AIR CLEANER
3 ....... 9807956846......... SPARK PLUG
1 ....... 28462ZE2W11 ..... ROPE, RECOIL STARTER
1 ....... 17620ZH7023...... CAP, FUEL TANK
2 ....... EM200863 ........... KIT, WIPER BLADES (STEEL DRUM)
2 ....... EM204625 ........... KIT, WIPER BLADES (PLASTIC DRUM)
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — NAMEPLATE AND DECALS
NAMEPLATE AND DECALS
PAGE 8 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — NAMEPLATE AND DECALS
NAMEPLATE AND DECALS
NO
1
2
3
4
5
6
7
9
PART NO
DCL151
EM948630
CIPDCL160
515275
504713
35137
504714
513479
PART NAME
DECAL, TOWING INSTRUCTIONS
DECAL, PUSH TO STOP
DECAL, CRUSH WARNING
DECAL, WHITEMAN LOGO (SMALL)
DECAL, SAFETY INSTRUCTIONS
DECAL, WARNING READ
DECAL, WHITEMAN LOGO (LARGE)
DECAL, WARNING SAFETY GRATE
DECAL, CRUSH WARNING SAFETY GRATE
DECAL, WARNING DUMP HANDLE
DECAL, DRUM LOCK
QTY.
REMARKS
2
1
2
3
1
1
3
1
1
1
1
1
9
DCL335
DCL280
513522
10
11
12
13
13118
DECAL, POWDER COATED
NAMEPLATE........................................................ 1 ......... CONTACT PARTS DEPT.
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — FRAME ASSY.
FRAME ASSY.
PAGE 10 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — FRAME ASSY.
FRAME ASSY.
NO.
1
2
3
4
5
8
9
PART NO.
PART NAME
QTY.
REMARKS
514842
491692
530023
507444
514835
EM963692
492584
514802
10176
LOCK PIN UNIT
1
1
1
1
1
6
6
1
1
1
1
COTTER PIN
SPRING LOCKING PIN
WASHER, FLAT 3/4"
MAIN FRAME
BOLT 1/2" UNC 1-1/2"
NUT, LOCK 1/2"
AXLE, UNIVERSAL
LOCK NUT 1/2" NC
BOLT 1/2"-13 X 4 G5
SAFETY CHAIN
CONNECTOR LINK ..................................................... 2 ...................BEFORE JANUARY 2006
CONNECTOR LINK ..................................................... 1 ...................AFTER JANUARY 2006
CLEVIS SAFETY HOOK ............................................ 1 ...................AFTER JANUARY 2006
CHAIN AND LINK KIT................................................. 1 ...................INCLUDES ITEMS W/
BALL HITCH 2-INCH ................................................... 1 ...................CONTACT UNIT SALES
10
11
12
EM124
13
*
14
*
01004
01004
516580
13363KIT
HBC-1
HLC-1
14
*
14A
*
15
16
17
18
*
LOOP HITCH .............................................................. 1 ...................CONTACT UNIT SALES
PIN HITCH 1-INCH...................................................... 1 ...................CONTACT UNIT SALES
HPC-1
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — PADDLE SHAFT ASSY.
PADDLE SHAFT ASSY.
PAGE 12 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — PADDLE SHAFT ASSY.
PADDLE SHAFT ASSY.
NO.
1
2
PART NO.
514752
492584
PART NAME
QTY.
1
6
REMARKS
PADDLE SHAFT
NUT, LOCK 1/2"
3
4
EM200295
510721
PADDLE ARM, CENTER ENGINE END
BOLT, 1/2 " X 6" G5
1
2
5
6
7
EM200292
EM200296
504322
INSERT, PADDLE ARM
PADDLE ARM, ENGINE END
WASHER, FLAT 1/2"
4
1
6
8
9
10
EM200297
EM200294
492367
EM923023
EM507519
EM200212
EM203432
2105164
EM923343
EM200293
EM203433
EM507518
EM200213
EM200863
U-BOLT, END PADDLES
PADDLE ARM, CENTER TOW END
SCREW, HHC 5/16-18 X 1-3/4 G5
WASHER, FLAT 5/16"
BLADE, SIDE, POLY .................................................. 4 ...................PLASTIC DRUM
BLADE, SIDE, RUBBER ............................................. 4 ...................STEEL DRUM
BLADE, SIDE, SCRAPPER........................................ 4 ...................STEEL & PLASTIC DRUM
NUT, HEX 5/16" NC G5
WASHER, LOCK 5/15"
PADDLE ARM, TOW END
BLADE ,SCRAPPER END .......................................... 4 ...................STEEL & PLASTIC DRUM
BLADE, PLASTIC END .............................................. 4 ...................PLASTIC DRUM
BLADE, RUBBER END ............................................... 4 ...................STEEL DRUM
2
1
14
28
#
#
*
11
*
12
12
13
14
15
16
17
18
18
19
#
*
*
*
*
#
#
#
14
14
1
#
*
#
*
KIT, WIPERS, SCRAPPERS & HDWARE................... 1 ...................INCLUDES ITEMS W/
STEEL DRUM
KIT, WIPERS, SCRAPPERS & HDWARE................... 1 ...................INCLUDES ITEMS W/
PLASTIC DRUM
*
#
19
EM204625
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — STEEL DRUM ASSY.
STEEL DRUM ASSY.
PAGE 14 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — STEEL DRUM ASSY.
STEEL DRUM ASSY.
NO.
1
2
PART NO.
530028
3249
PART NAME
DRUM BEARING BRACKET
CAP, DUST
QTY.
2
1
REMARKS
3
20561-001
BEARING SEALED ........................................... 2 ........... SET SCREWS AND BEARING
.......................................................................................... COLLAR CANNOT BE PURCHASED
.......................................................................................... SEPARATELY.
4
5
6
7
8
9
491008
CAP, GREASE FITTING
FITTING, GREASE
NUT, LOCK 3/8"
WASHER, FLAT 3/8"
TRUNNION HUB
ROLL PIN 3/16" X 3/4"
SEAL, SHAFT (BLACK)
RING, RETENTION
SEAL, SHAFT URETHANE (YELLOW)
BOLT, FHCS 3/8" NC X 2" G5
DRUM, STEEL
SET SCREW
MAIN GEAR
KEY, 3/8" X 88 MM
CARRIAGE BOLT 3/8-16 X 1-1/2"
SHAFT, PADDLE
WASHER, FLAT 1/2"
LIFT BAR
PIN, COTTER
GRATE
PIN, COTTER
HEX NUT 1/2" G5
WASHER, LOCK 1/2"
BOLT 1/2" UNC 1-1/2"
CAPSCREW, HHCS 1/2" NC X 1-1/4"
NUT, LOCK1/2" NC
HANDLE DUMP
2
2
12
4
2
2
2
2
2
8
1
2
1
1
4
1
4
1
1
1
2
2
2
2
1
1
1
1
EM916019
EM969013
3019092
514778
513453
20654-001
530029
20104-002
504943
514786
492484
530043
501016
17985-012
514752
492600
514945
EM925191
514946
505070
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
492556
6109180
EM963692
EM963102
492584
201537
EM98195
GRIP, DUMP HANDLE
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — PLASTIC DRUM ASSY.
PLASTIC DRUM ASSY.
PAGE 16 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — PLASTIC DRUM ASSY.
PLASTIC DRUM ASSY.
NO.
1
2
PART NO.
530028
3249
PART NAME
DRUM BEARING BRACKET
CAP, DUST
QTY.
2
1
REMARKS
3
20561-001
BEARING SEALED ........................................... 2 ........... SET SCREWS AND BEARING
.......................................................................................... COLLAR CANNOT BE PURCHASED
.......................................................................................... SEPARATELY.
4
5
6
7
8
9
491008
CAP, GREASE FITTING
FITTING, GREASE
NUT, LOCK 3/8"
WASHER, FLAT 3/8"
TRUNNION HUB
ROLL PIN 3/16" X 3/4"
SEAL, SHAFT (BLACK)
RING, RETENTION
SEAL, SHAFT URETHANE (YELLOW)
BOLT, FHCS 3/8" NC X 2" G5
DRUM, PLASTIC
SET SCREW
MAIN GEAR
KEY, 3/8" X 88 MM
CARRIAGE BOLT 3/8-16 X 1-1/2"
SHAFT, PADDLE
WASHER, FLAT 1/2"
LIFT BAR
2
2
20
6
2
2
2
2
2
8
1
2
1
1
4
1
1
1
1
1
2
2
2
2
1
1
1
1
1
8
8
1
1
1
EM916019
EM969013
3019092
514778
513453
20654-001
530029
20104-002
504943
515052
492484
530043
500432
17985-012
514752
492600
514947
EM925191
EM507417
505070
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
PIN, COTTER
GRATE, MOVEABLE
PIN, COTTER
492556
HEX NUT 1/2" G5
6109180
EM963610
EM963102
492584
EM201537
EM98195
515033
511910
2101428
514989
WASHER, LOCK 1/2"
BOLT 3/8" NC 1-1/4" G8
CAPSCREW, HHCS 1/2" NC X 1-1/4"
NUT, LOCK1/2" NC
HANDLE DUMP
GRIP, DUMP HANDLE
RUBBER, GASKET
BOLT 1/4" NC X 1-1/4" G5
NUT 1/4" NC
U-SUPPORT PLASTIC DRUM
GRATE, STATIONARY
WASHER, FLAT 5/8"
EM507416
0401450160
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY.
DRUM AND PADDLE SHAFT COMPLETE ASSY. (PLASTIC DRUM)
PAGE 18 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY.
DRUM AND PADDLE SHAFT COMPLETE ASSY. (PLASTIC DRUM)
NO.
1
PART NO.
516064
PART NAME
QTY.
REMARKS
DRUM AND SHAFT COMPLETE ASSY. ........... 1 ........... INCLUDES ITEMS LISTED BELOW:
530028
DRUM BEARING BRACKET
CAP, DUST
2
1
3249
20561-001
491008
BEARING SEALED
2
CAP, GREASE FITTING
FITTING, GREASE
2
EM916019
EM969013
3019092
514754
2
NUT, LOCK 3/8"
20
6
WASHER, FLAT 3/8"
TRUNNION HUB
2
513453
ROLL PIN 3/16" X 3/4"
SEAL, SHAFT (BLACK)
RING, RETENTION
2
20654-001
530029
2
2
20104-002
513452
SEAL, SHAFT URETHANE (YELLOW)
BOLT 3/8" NC X 1/4" G5
DRUM, PLASTIC
2
8
515052
1
492484
SET SCREW
2
530043
MAIN GEAR
1
500432
KEY, 3/8" X 50 MM
1
EM963057
514752
CAPSCREW HHCS 3/8 X 1-1/2"
SHAFT, PADDLE
4
1
EM507417
505070
GRATE, MOVEABLE
PIN, COTTER
HEX NUT 1/2" G5
1
2
492556
2
6109180
EM963610
EM201537
15081
WASHER, LOCK 1/2"
BOLT 3/8" NC 1-1/4" G8
HANDLE, DUMP
GRIP, DUMP HANDLE
RUBBER, GASKET
BOLT 1/4" NC X 1-1/4" G5
NUT 1/4" NC
U-SUPPORT PLASTIC DRUM
GRATE, STATIONARY
PADDLE SHAFT
NUT, LOCK 1/2"
PADDLE ARM, CENTER ENGINE END
BOLT, 1/2 " X 6" G5
INSERT, PADDLE ARM
PADDLE ARM, ENGINE END
WASHER, FLAT 1/2"
U-BOLT, END PADDLES
PADDLE ARM, CENTER TOW END
SCREW, HHC 5/16-18 X 1-3/4 G5
WASHER, FLAT 5/16"
BLADE, SIDE, POLY
BLADE, SIDE, SCRAPPER
NUT, HEX 5/16" NC G5
WASHER, LOCK 5/15"
PADDLE ARM, TOW END
BLADE ,SCRAPPER END
BLADE, PLASTIC END
2
2
1
1
515033
1
511910
8
2101428
514989
8
1
EM507416
514752
1
1
492584
6
EM200295
510721
1
2
EM200292
EM200296
504322
4
1
6
EM200297
EM200294
492367
EM923023
13352
EM203432
2105164
EM923343
EM200293
EM203433
507518
2
1
14
28
4
4
14
14
1
4
4
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY.
DRUM AND PADDLE SHAFT COMPLETE ASSY. (STEEL DRUM)
PAGE 20 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY.
DRUM AND PADDLE SHAFT COMPLETE ASSY. (STEEL DRUM)
NO.
1
PART NO.
516063
PART NAME
QTY.
REMARKS
DRUM AND SHAFT COMPLETE ASSY. ........... 1 ........... INCLUDES ITEMS LISTED BELOW:
530028
3249
DRUM BEARING BRACKET
CAP, DUST
2
1
20561-001
491008
EM916019
EM969013
3019092
514754
BEARING SEALED
CAP, GREASE FITTING
FITTING, GREASE
NUT, LOCK 3/8"
WASHER, FLAT 3/8"
TRUNNION HUB
2
2
2
12
4
2
513453
20654-001
530029
ROLL PIN 3/16" X 3/4"
SEAL, SHAFT (BLACK)
RING, RETENTION
2
2
2
20104-002
504943
514786
SEAL, SHAFT URETHANE (YELLOW)
BOLT 3/8" NC X 2" G5
DRUM, STEEL
2
8
1
492484
530043
SET SCREW
MAIN GEAR
2
1
500432
EM963057
514752
KEY, 3/8" X 50 MM
CAPSCREW HHCS 3/8 X 1-1/2"
SHAFT, PADDLE
1
4
1
492600
514946
WASHER, FLAT 1/2"
GRATE
2
1
505070
492556
PIN COTTER
HEX NUT 1/2" G5
2
2
6109180
EM963692
EM201537
15081
WASHER, LOCK 1/2"
BOLT 1/2" UNC 1-1/2"
HANDLE DUMP
GRIP, DUMP HANDLE
PADDLE SHAFT
2
2
1
1
514752
1
492584
EM200295
510721
NUT, LOCK 1/2"
PADDLE ARM, CENTER ENGINE END
BOLT, 1/2 " X 6" G5
6
1
2
EM200292
EM200296
504322
EM200297
EM200294
492367
EM923023
EM200212
EM203432
2105164
EM923343
EM200293
EM203433
EM200213
INSERT, PADDLE ARM
PADDLE ARM, ENGINE END
WASHER, FLAT 1/2"
U-BOLT, END PADDLES
PADDLE ARM, CENTER TOW END
SCREW, HHC 5/16-18 X 1-3/4 G5
WASHER, FLAT 5/16"
BLADE, SIDE, RUBBER
BLADE, SIDE, SCRAPPER
NUT, HEX 5/16" NC G5
WASHER, LOCK 5/15"
PADDLE ARM, TOW END
BLADE ,SCRAPPER END
BLADE, RUBBER END
4
1
6
2
1
14
28
4
4
14
14
1
4
4
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — AXLE ASSY.
AXLE ASSY.
12
10
9
8
9
8
5
7
3
11
1
6
4
NOTES:
2
1
COMPLETE HUB ASSEMBLY INCLUDES
ITEMS WITHIN DASHED LINES, AND ALSO
INCLUDES ITEMS 1 AND 2.
1
PAGE 22 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — AXLE ASSY.
AXLE ASSY.
NO
PART NO
PART NAME
QTY.
REMARK
1
2
3
4
5
6
7
8
9
#
3469
DUST CAP
2
8
2
2
2
2
1
4
4
2
#
8115
3005
8164
491688
EM511159
EM501299
EM903113
EM903012
EM914288
EM941306
514802
LUG NUTS
TIRE AND RIM, CARLISE
ARMLE NUT 1"
COTTER PIN 1/8" X 1-1/2'
WASHER, FLAT, .087" THICKNESS
WASHER, FLAT, .135" THICKNESS
BEARING CONE, (1-1/16" SPINDLE)
BEARING CUP
#
#
10
11
12
#
OIL SEAL
HUB ASSY., 4-BOLT (1-1/16" SPINDLE) ........................ 2 ........... INCLUDES ITEMS W/
AXLE, UNIVERSAL
#
1
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — ENGINE ASSY.
ENGINE ASSY.
PAGE 24 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — ENGINE ASSY.
ENGINE ASSY.
NO
1
2
3
4
5
6
7
PART NO
492583
506488
EM905016
492378
490957
PART NAME
QTY.
REMARKS
NUT 3/8" NC G5
8
8
2
4
2
1
1
FLAT WASHER 3/8
PILLOW BLOCK BEARING
BOLT 3/8" NC X 1-3/4" G5
RING, RETENTION
PINION GEAR
513868
500214
KEY, 1/4" X 30 MM
8
9
EM502226
492057
505084
492467
505834
503117
90745ZE2600
492378
GX240K1HA2
515040
EM901074
492598
PINION SHAFT .......................................... 1 ................ REPLACES P/N 502226
PULLEY (LARGE)
KEY, 1/4" X 55 MM
SET SCREW, 5/16' NC 3/8"
V-BELT, A-36
1
1
4
2
1
1
4
1
1
1
5
4
4
1
1
1
1
1
3
1
2
1
2
1
1
1
10
11
12
13
14
15
16
17
18
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
BOLT, 3/8" NC X 3" G5
SQ. KEY 6.3 X 6.3 X 43 MM
BOLT 3/8" NC X 1-3/4" G5
ENGINE, HONDA
BELT RETAINER BAR
PULLEY, (SMALL)
WASHER, FLAT 3/8"
WASHER, LOCK 3/8"
NUT, HEX 3/8"
492624
492554
492600
505084
WASHER, FLAT 1/2"
SQ. KEY, 1/4" X 55 MM
BOLT 1/2" NC X 1-1/2" G5
SPRING, EXTENSION
SPRING CLIP
492394
EM102014
EM203098
492313
EM507491
959080
492584
492574
492476
EM901515
515045
BOLT 3/8" NC X 1-1/2" G5
ARM, IDLER
ROD-END
NUT, HEX 1/2"
NUT, HEX 3/8" NF G5
SET SCREW, 5/16' NC 3/4"
PULLEY, IDLER
ROD
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — ELECTRIC MOTOR ASSY.
ELECTRIC MOTOR ASSY.
PAGE 26 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — ELECTRIC MOTOR ASSY.
ELECTRIC MOTOR ASSY.
NO
1
2
3
4
5
6
7
8
PART NO
492583
506488
EM905016
492378
490957
513868
500214
20216-001
505204
505084
492467
507725
503117
492378
EM939315
515040
EM901513
492598
492624
492554
492600
505084
492394
EM102014
EM203098
492313
EM507491
959080
492584
492574
492476
EM901515
515045
492364
492554
EM507715
500214
490957
PART NAME
QTY.
8
8
2
4
2
1
1
1
1
1
4
2
1
4
1
1
1
5
4
4
1
1
1
1
1
3
1
2
1
2
1
1
1
1
4
1
1
2
REMARKS
NUT 3/8" NC G5
FLAT WASHER 3/8
PILLOW BLOCK BEARING
BOLT 3/8" NC X 1-3/4" G5
RING, RETENTION
PINION GEAR
KEY, 1/4" X 30 MM
PINION SHAFT
PULLEY (LARGE)
KEY, 1/4" X 55 MM
SET SCREW, 5/16' NC 3/8"
V-BELT, A-48
BOLT, 3/8" NC X 3" G5
BOLT 3/8" NC X 1-3/4" G5
ELECTRIC MOTOR 3.0 HP
BELT RETAINER BAR
PULLEY, (SMALL)
WASHER, FLAT 3/8"
WASHER, LOCK 3/8"
NUT, HEX 3/8"
WASHER, FLAT 1/2"
KEY, 1/4" X 55 MM
BOLT 1/2" NC X 1-1/2" G5
SPRING, EXTENSION
SPRING CLIP
BOLT 3/8" NC X 1-1/2" G5
ARM, IDLER
ROD-END
NUT, HEX 1/2"
NUT, HEX 3/8" NF G5
SET SCREW, 5/16' NC 3/4"
PULLEY, IDLER
9
10
11
12
13
15
16
17
18
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
ROD
BOLT, 5/16" NC X 1" G5
NUT, HEX 3/8"
BELT RETAINER BAR
KEY, 1/4" X 30 MM
RING, RETENTION
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — CABINET ASSY.
CABINET ASSY.
PAGE 28 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-90S/P MIXER — CABINET ASSY.
CABINET ASSY.
NO
1
2
3
4
PART NO
514964
490202
13287
2203
1307
PART NAME
QTY.
REMARKS
CABINET, ENGINE W/DECALS .................. 1 ........... INCLUDES ITEMS W/
*
RUBBER PROTECTOR
4
LOCK NUT 8-32........................................... 6 ........... REPLACEMENT PART ONLY
WASHER, FLAT #10 .................................... 6 ........... REPLACEMENT PART ONLY
SCREW RHMS 8-32 X 1/2" ......................... 6 ........... REPLACEMENT PART ONLY
5
6
*
7
491010
492375
492598
492583
29174-001
29173-001
504135C
EM974007
LATCH ASSY., COMPLETE
BOLT 3/8" NC X 1" G5
WASHER, FLAT 3/8"
NUT 3/8" NC G5
KNOB, MUSHROOM
SWITCH, PUSH-PULL
WIRE HARNESS
PAINT, SPRAY 12 OZ. TRAFFIC RED
2
4
4
4
1
1
1
1
8
9
10
11
12
13
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
PAGE 30 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
1
2
3
*
5
PART NO.
PART NAME
QTY.
REMARKS
16271ZE2000
17210ZE2515
17218ZE2505
17231ZH9820
17232891000
17238ZE2310
17239ZE1000
17410ZE2020
0037806000
90325044000
90009ZE2003
9405006000
GASKET, ELBOW ..................................... 1 ............. INCLUDES ITEM W/
*
ELEMENT, AIR CLEANER, DUAL
FILTER, OUTER
COVER, AIR CLEANER
GROMMET, AIR CLEANER
COLLAR, AIR CLEANER
COLLAR B, AIR CLEANER
ELBOW COMP., AIR CLEANER ............... 1 ............. INCLUDES ITEM W/
WINGNUT 6MM
WINGNUT, TOOL BOX SETTING
BOLT- WASHER 6 X 22
NUT, FLANGE 6MM
1
1
1
1
2
1
6
8
9
#
#
10
12
13
14
15
#
1
2
1
2
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
PAGE 32 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
NO.
1
1
2
3
4
5
6
*
7
8
PART NO.
PART NAME
QTY.
REMARKS
14100ZE2W01
14100ZE2306
14410ZE2013
14431ZE2010
14441ZE2000
14451ZE1013
14568ZE1000
14711ZE2000
14721ZE2000
14751ZE2003
14771ZE2000
14773ZE2000
14781ZE2000
14791ZE2010
90012ZE0010
90206ZE1000
CAMSHAFT ASSY. ................................... 1 ............. INCLUDES ITEM W/
*
CAMSHAFT
ROD PUSH
ARM VALVE ROCKER
LIFTER VALVE
PIVOT ROCKER ARM
SPRING, WEIGHT RETURN
VALVE, IN.
1
2
2
2
2
1
1
1
2
1
1
1
1
2
2
VALVE, EX.
SPRING, VALVE
9
10
11
12
13
14
15
RETAINER, IN. VALVE SPRING
RETAINER, EX. VALVE SPRING
ROTATOR, VALVE
PLATE, PUSH ROD GUIDE
BOLT, PIVOT 8MM
NUT, PIVOT ADJ.
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CARBURETOR ASSY.
CARBURETOR ASSY.
PAGE 34 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CARBURETOR ASSY.
CARBURETOR ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
1 +
16010ZE2812
16011ZA0931
16013ZA0931
16016ZHW01
16024ZE1811
16028ZE0005
16028ZE2005
16100ZE2W71
16124ZE0005
16166ZE2W70
16075GHBB00
16075GHBB00
16211ZE2000
16220ZA0702
16221ZA0800
16223ZA0800
16610ZE1000
16953ZE1812
16954ZE1811
16956ZE1811
16957ZE1812
16967ZE0811
93500030060H
9430520122
GASKET SET
VALVE SET, FLOAT
FLOAT SET
1
1
1
1
1
1
1
*
2
3
*
*
5
6 +
SCREW SET
*
SCREW SET, DRAIN
SCREW SET B
CHOKE SET
CARBURETOR ASSY.................... 1 ..... INCLUDES ITEMS W/
SCREW, THROTTLE STOP
NOZZLE, MAIN
*
7 +
*
8
*
9
10
*
*
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
*
11
*
12
*
COLLAR, SET
O-RING
13
*
14
INSULATOR, CARB.
SPACER COMP., CARB.
GASKET, CARBURETOR
GASKET, INSULATOR
LEVER COMP., CHOKE, STD.
LEVER, VALVE
PLATE, LEVER SETTING
SPRING, VALVE LEVER
GASKET, VALVE
CUP, FUEL STRAINER
SCREW, PAN 3 X 6
PIN, SPRING 2 X 12
JET, MAIN #82, OPTIONAL
JET, MAIN #85, OPTIONAL
JET, MAIN #88
15
16
17
18
19
*
20
*
21
*
22
*
23
*
24
*
25
26
99101ZH70820
99101ZH70850
99101ZH80880
99204ZE20400
16015ZE8005
*
26
*
26
*
27
28
JET SET, PILOT #40
CHAMBER SET, FLOAT ................ 1 ..... INCLUDES ITEMS W/+
*
*
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CONTROL ASSY.
CONTROL ASSY.
PAGE 36 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CONTROL ASSY.
CONTROL ASSY.
NO.
2
3
4
5
PART NO.
PART NAME
ARM, GOVERNOR
ROD, GOVERNOR
SPRING, GOVERNOR
SPRING, THROTTLE RETURN
CONTROL ASSEMBLY ................................ 1 .......... INCLUDES ITEMS W/
QTY.
REMARKS
16551ZE2000
16555ZE2000
16561ZE2000
16571ZE2000
16570ZE2W00
16571ZE2W00
16574ZE1000
16575ZE2W00
16578ZE1000
16581ZE2W00
16584883300
90013883000
90015ZE5010
90114SA0000
93500050280A
9405006000
1
1
1
1
8
*
10
LEVER, CONTROL
SPRING, LEVER
1
1
1
1
1
1
2
1
1
1
1
*
11
*
12
*
WASHER, CONTROL LEVER
SPACER, CONTROL LEVER
BASE, CONTROL
SPRING, CONTROL ADJUSTING
BOLT, FLANGE (6 X 12) (CT200)
BOLT, GOVERNOR ARM
NUT, SELF- LOCK (6MM)
SCREW, PAN (5 X 28)
NUT, FLANGE
14
*
15
*
16
*
19
20
21
*
24
*
27
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
PAGE 38 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
NO.
2
PART NO.
11400ZE2621
PART NAME
QTY.
REMARKS
COVER ASSY., CRANKCASE ..................... 1........... INCLUDES ITEMS W/
(H-TYPE) (BALANCER)
*
3
4
5
8
9
11381ZE2801
15600ZG4003
15600735003
15625ZE1003
15625ZE1003
16510ZE2811
GASKET, CASE COVER
1
CAP ASSY., OIL FILLER ............................. 1........... INCLUDES ITEMS W/
CAP ASSY., OIL FILLER ............................. 1........... INCLUDES ITEMS W/
#
%
%
#
GASKET, OIL FILLER CAP
GASKET, OIL FILLER CAP
1
1
10
GOVERNOR ASSEMBLY (BALANCER) ...... 1........... INCLUDES ITEMS W/+
11 + 16511ZE2000
WEIGHT, GOVERNOR
2
1
2
1
1
1
2
1
7
1
1
1
1
*
12 + 16512ZE2811
HOLDER, GOVERNOR WEIGHT
PIN, GOVERNOR WEIGHT
SLIDER, GOVERNOR
WASHER (6 X 16)
CLIP, GOVERNOR HOLDER
PIN, DOWEL (8 X 12)
WASHER, PLAIN (6MM)
BOLT, FLANGE (8 X 35)
BEARING, RADIAL BALL (6202)
BEARING, RADIAL BALL (6204)
BEARING, RADIAL BALL (6206)
BEARING, RADIAL BALL (6302)
*
13 + 16513ZE2000
*
14
15
16
17
18
19
20
21
22
23
16531ZE2000
90473147000
90602ZE1000
90701HC4000
58176
957010803500
961006202000
961006204000
961006206000
961006302000
*
*
*
*
*
*
*
*
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
PAGE 40 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
NO.
3
8
PART NO.
PART NAME
QTY.
REMARKS
13320ZE2611
13351ZE2010
961006206000
CRANKSHAFT (L- TYPE)............................. 1 .......... INCLUDES ITEM W/
*
WEIGHT BALANCER
BEARING, RADIAL BALL (6206)
1
1
12
*
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
PAGE 42 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
NO.
1
2
3
6
7
8
*
9
10
11
12
13
PART NO.
PART NAME
QTY.
REMARKS
12000ZE2834
15510ZE2043
16541ZE2010
90131896650
90446KE1000
91201890003
91353671003
9405010000
031112230
CYLINDER ASSY., BALANCER + OIL ALERT ...... 1 .......... INCLUDES ITEMS W/
*
SWITCH ASSY., OIL LEVEL
SHAFT, GOVERNOR ARM
BOLT, DRAIN PLUG
WASHER 8.2 X17X0.8
OIL SEAL 30X46X8
O-RING 14MM ARAI
NUT FLANGE 10MM
WASHER, DRAIN PLUG 12MM
PIN, LOCK 10MM
BOLT, FLANGE 6X12
BEARING, RADIAL BALL 6202
BOLT, FLANGE 6X12 CT200
ALERT UNIT, OIL
1
1
2
1
1
1
1
2
1
2
1
1
1
9425110000
957010601200
961006202000
90013883000
34150ZH7003
14
15
16
*
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 43
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
PAGE 44 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
12200ZH9000
12204ZE2306
12205ZE2305
12216ZE2300
12251ZE2800
12310ZE2020
12391ZE2020
14775ZE2010
90014ZE2000
90042ZE2000
92900080320E
90441ZE2010
9430112200
CYLINDER HEAD COMP. ....................................... 1 .......... INCLUDES ITEMS W/
*
2
*
3
*
4
*
5
6
7
GUIDE, VALVE, OS, OPTIONAL
GUIDE, EX. VALVE, OS, OPTIONAL
CLIP, VALVE GUIDE
GASKET, CYLINDER HEAD
COVER COMP., HEAD
GASKET, CYLINDER HEAD COVER
SEAT, VALVE SPRING
BOLT, HEAD COVER
BOLT, STUD 8X123
BOLT, STUD 8X47
WASHER COMP., HEAD COVER
PIN A, DOWEL 12X20
BULK HOSE, VACUUM 11X1000, 11X100
BOLT, FLANGE 10X80
1
1
1
1
1
1
1
1
2
2
1
2
1
4
1
1
8
10
11
12
13
14
15
16
17
17
950051100130M
957011008000
9807956846
SPARK PLUG, BPR6ES, NGK
SPARK PLUG, W20EPR-U, DENSO
9807956855
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 45
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
PAGE 46 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
NO.
1
2
3
4
5
7
9
PART NO.
PART NAME
QTY.
REMARKS
16731ZE2003
19610ZE2010ZC
19631ZE2D00
32197ZH8003
36100ZE1015
90013883000
90684ZA0601
CLIP, TUBE
1
1
1
1
1
6
1
COVER COMP., FAN *NH1* BLACK
SHROUD
SUB-HARNESS
SWITCH ASSY., ENGINE STOP
BOLT, FLANGE 6X12, CT200
CLIP, WIRE HARNESS
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 47
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — FLYWHEEL ASSY.
FLYWHEEL ASSY.
PAGE 48 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — FLYWHEEL ASSY.
FLYWHEEL ASSY.
NO.
1
2
4
7
PART NO.
PART NAME
QTY.
REMARKS
19511ZE2000
28450ZE2W11
31100ZE2010
90201ZE3V00
90741ZE2000
FAN, COOLING
1
1
1
1
1
PULLEY COMP., STARTER, SCREEN GRID
FLYWHEEL COMP.
NUT, SPECIAL 16MM
8
KEY, SPECIAL WOODRUFF 25X18
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 49
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
PAGE 50 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
PART NAME
QTY.
1
1
1
1
1
1
1
1
1
1
6
3
1
5
REMARKS
18310ZE2W00
18320ZE2W01
18323ZE2W00
18330ZE2W00
18331ZE2810
18333ZK6Y00
18355ZE2010
18381ZE2W10
18381ZE2800
90013883000
90050ZE1000
90055ZE1000
90050ZE1000
9405008000
MUFFLER
PROTECTOR, MUFFLER
PROTECTOR, EX. PIPE
PIPE, EX.
CAP, MUFFLER
GASKET, EX. PIPE
ARRESTER, SPARK
GASKET, MUFFLER (ARRESTER)
GASKET, MUFFLER
BOLT, FLANGE (6 X 12) (CT200)
SCREW, TAPPING (5 X 8)
SCREW, TAPPING (4 X 6)
SCREW, TAPPING (5 X 8) (OPTIONAL)
NUT, FLANGE (8MM)
9
10
11
12
13
14
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 51
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — FUELTANK ASSY.
FUEL TANK ASSY.
PAGE 52 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — FUELTANK ASSY.
FUEL TANK ASSY.
NO.
1
2
3
5
6
*
8
11
12
13
14
15
PART NO.
PART NAME
RUBBER SUPPORTER 107MM
JOINT, FUEL TANK
TANK COMP., FUEL *NH1*, BLACK
CAP COMP., FUEL FILLER .................................... 1 .......... INCLUDES ITEMS W/
GASKET, FUEL FILLER CAP
FILTER, FUEL
O-RING 14MM, ARAI
NUT, FLANGE 8MM
BULK HOSE, FUEL 4.5X3000, 4.5X222
CLIP, TUBE, B8
BOLT, FLANGE 8X25
QTY.
REMARKS
16854ZH8000
16955ZE1000
17510ZE2010ZD
17620ZH7023
17631ZH7003
17672ZE2W01
91353671003
9405008000
1
1
1
*
1
1
1
2
1
2
2
950014500360M
9500202080
957010802500
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 53
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2ENGINE — IGNITION ASSY.
IGNITION COIL ASSY.
PAGE 54 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2ENGINE — IGNITION ASSY.
IGNITION COIL ASSY.
NO.
1
2
6
8
PART NO.
PART NAME
QTY.
REMARKS
30500ZF6W02
30700ZE1013
31512ZE2000
36101ZE1010
90015883000
COIL ASSY., IGNITION
CAP ASSY., NOISE SUPPRESSOR
GROMMET, WIRE
1
1
1
1
2
WIRE, STOP SWITCH 370MM
BOLT, FLANGE 6X28
11
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 55
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — PISTON ASSY.
PISTON ASSY.
PAGE 56 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — PISTON ASSY.
PISTON ASSY.
NO.
1
1
1
1
2
2
2
2
3
4
4
5
*
6
PART NO.
PART NAME
QTY.
REMARKS
13010ZE2013
13011ZE2013
13012ZE2013
13013ZE2013
13101ZE2W00
13102ZE2W00
13103ZE2W00
13104ZE2W00
13111ZE2000
13200ZE2000
13200ZE2305
90001ZE8000
90551ZE1000
RING SET, PISTON, STD.
RING SET, PISTON, OS 0.25, OPTIONAL
RING SET, PISTON, OS 0.50, OPTIONAL
RING SET, PISTON, 0.75, OPTIONAL
PISTON, STANDARD
1
1
1
1
1
1
1
1
1
PISTON, OS 0.25, OPTIONAL
PISTON, OS 0.50, OPTIONAL
PISTON, 0.75, OPTIONAL
PIN, PISTON
ROD ASSY., CONNECTING STANDARD ................ 1 .......... INCLUDES ITEMS W/
ROD ASSY., CONNECTING, US 0.25, OPT.
BOLT, CONNECTING ROD
*
1
2
2
CLIP, PISTON PIN 18MM
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 57
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
PAGE 58 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
28400ZE2W01ZB
28410ZE2W01ZB
28421ZE2W01
28422ZE2W01
28441ZE2W01
28442ZE2W01
28443ZE2W01
28444ZE2W01
28461ZE2W02
28462ZE2W11
90004ZE2W01
90008ZE2003
STARTER ASSY., RECOIL *NH1*, BLK ............... 1 ......... INCLUDES ITEMS W/
*
2
CASE COMP., RECOIL STARTER *NH1*, BLK
PULLEY, RECOIL STARTER
RATCHET, STARTER
SPRING, FRICTION
SPRING, STARTER RETURN
SPRING RATCHET
RETAINER, SPRING
GRIP, STARTER
ROPE, RECOIL STARTER
SCREW, CENTER
BOLT, FLANGE 6X10
1
1
2
1
1
2
1
1
1
1
3
*
3
*
4
*
5
*
6
*
7
8
*
*
10
*
11
*
13
*
14
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 59
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — GEAR REDUCTION ASSY.
GEAR REDUCTION ASSY.
PAGE 60 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — GEAR REDUCTION ASSY.
GEAR REDUCTION ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
PART NAME
QTY.
REMARKS
11500ZE2620
11521ZE2800
22103ZE2620
23220ZE2621
23710ZE2621
90401ZE2620
90402ZE2620
90473842000
90745ZE2600
91201890003
9430108140
COVER ASSY, REDUCTION CASE ............. 1 .......... INCLUDES ITEMS W/
*
GASKET, CHAIN CASE COVER
GEAR, PRIMARY DRIVE (17T)
COUNTERSHAFT
SHAFT, P.T.O. (H- TYPE)
SHIM A (OPTIONAL)
SHIM B (OPTIONAL)
WASHER (8MM)
1
1
1
1
AR
AR
1
1
1
2
1
6
1
9
KEY (6.3 X 6.3 X 43)
10
11
12
13
OIL SEAL (30 X 46 X 8)
PIN A, DOWEL ( 8 X 14)
BOLT, FLANGE (8 X 25)
BOLT, FLANGE (8 X 40)
BEARING, RADIAL BALL (6206)
BEARING, RADIAL BALL (6302)
*
957010802500
957010804000
961006206000
961006302000
14
15
*
*
1
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 61
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — LABEL ASSY.
LABEL ASSY.
PAGE 62 — WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1HA2 ENGINE — LABEL ASSY.
LABELS ASSY.
NO.
1
2
3
5
15
16
PART NO.
PART NAME
QTY.
REMARKS
87521ZE2W01
87522ZE1810
87522ZH9000
87528ZE2810
87586ZH7W00
87532ZH8810
EMBLEM, INTERNAL
MARK, CAUTION, EXTERNAL
LABEL, CAUTION
1
1
1
1
1
1
MARK, CHOKE, EXTERNAL
LABEL, FUEL CAUTION
MARK, OIL ALERT
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 63
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS
5. Partsmustbeinnewandresalablecon- Multiquipreservestherighttoquoteandsell
dition,intheoriginalMultiquippackage(if directtoGovernmentagencies,andtoOriginal
any), and with Multiquip part numbers Equipment Manufacturer accounts who use
Terms of payment for parts are net 30 days.
FREIGHTPOLICY
clearlymarked.
our products as integral parts of their own
products.
All parts orders will be shipped collect or
prepaidwiththechargesaddedtotheinvoice.
All shipments are F.O.B. point of origin.
Multiquip’sresponsibilityceaseswhenasigned
manifesthasbeenobtainedfromthecarrier,
andanyclaimforshortageordamagemustbe
settledbetweentheconsigneeandthecarrier.
6. Thefollowingitemsarenotreturnable:
SPECIALEXPEDITINGSERVICE
a. Obsolete parts. (If an item is in the
price book and shows as being re- A$35.00surchargewillbeaddedtotheinvoice
placedbyanotheritem,itisobsolete.) forspecialhandlingincludingbusshipments,
insuredparcelpostorincaseswhereMultiquip
mustpersonallydeliverthepartstothecarrier.
(such as gaskets, seals, “O” rings,
b. Any parts with a limited shelf life
andotherrubberparts)thatwerepur- LIMITATIONSOFSELLER’SLIABILITY
MINIMUMORDER
chasedmorethansixmonthspriorto
thereturndate.
Multiquip shall not be liable hereunder for
damagesinexcessofthepurchasepriceofthe
TheminimumchargeforordersfromMultiquip
is $15.00 net. Customers will be asked for
instructionsregardinghandlingofordersnot
meetingthisrequirement.
c. Anylineitemwithanextendeddealer item with respect to which damages are
netpriceoflessthan$5.00.
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
otherspecial,consequentialorincidentaldam-
ages.
d. Special order items.
RETURNEDGOODSPOLICY
e. Electricalcomponents.
f. Paint,chemicals,andlubricants.
g. Decalsandpaperproducts.
h. Itemspurchasedinkits.
Returnshipmentswillbeacceptedandcredit
willbeallowed,subjecttothefollowingprovi-
sions:
LIMITATIONOFWARRANTIES
Nowarranties,expressorimplied,aremade
in connection with the sale of parts or trade
accessoriesnorastoanyenginenotmanufac-
tured by Multiquip. Such warranties made in
connectionwiththesaleofnew,completeunits
are made exclusively by a statement of war-
rantypackagedwithsuchunits,andMultiquip
neitherassumesnorauthorizesanypersonto
assume for it any other obligation or liability
whatever in connection with the sale of its
products.Apartfromsuchwrittenstatementof
warranty, there are no warranties, express,
impliedorstatutory,whichextendbeyondthe
descriptionoftheproductsonthefacehereof.
1. AReturnedMaterialAuthorizationmust
be approved by Multiquip prior to ship-
ment.
7. Thesenderwillbenotifiedofanymaterial
receivedthatisnotacceptable.
2. ToobtainaReturnMaterialAuthorization,
alistmustbeprovidedtoMultiquipParts
Salesthatdefinesitemnumbers,quanti-
ties, and descriptions of the items to be
returned.
8. Suchmaterialwillbeheldforfiveworking
days from notification, pending instruc-
tions.Ifareplyisnotreceivedwithinfive
days,thematerialwillbereturnedtothe
senderathisexpense.
a. Thepartsnumbersanddescriptions
must match the current parts price
list.
9. Creditonreturnedpartswillbeissuedat
dealer net price at time of the original
purchase,lessa15%restockingcharge.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
basedonthelistpricethatwaseffective
twelvemonthspriortotheRMAdate.
c. The list must state the reason(s) for
thereturn.
Effective: February 22, 2006
d. The list must reference the sales
order(s)orinvoice(s)underwhichthe
itemswereoriginallypurchased.
11. Credit issued will be applied to future
purchasesonly.
e. The list must include the name and
phonenumberofthepersonrequest-
ingtheRMA.
PRICINGANDREBATES
Prices are subject to change without prior
notice.Pricechangesareeffectiveonaspe-
cificdateandallordersreceivedonorafterthat
datewillbebilledattherevisedprice.Rebates
3. AcopyoftheReturnMaterialAuthoriza-
tionmustaccompanythereturnshipment.
4. Freight is at the sender’s expense. All forpricedeclinesandaddedchargesforprice
partsmustbereturnedfreightprepaidto increaseswillnotbemadeforstockonhand
Multiquip’sdesignatedreceivingpoint.
atthetimeofanypricechange.
PAGE 64 —WHITEMANG-4.5RA.C. GENERATOR—OPERATION&PARTSMANUAL—REV.#0(12/15/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
WM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (03/04/08) — PAGE 65
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS MANUAL
HERE'S HOW TO GET HELP
PLEASE HAVETHE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
18910 Wilmington Ave.
Carson, CA 90746
MQ Parts Department
Tel. (800) 421-1244
800-427-1244
310-537-3700
Fax:800-672-7877
Fax:310-637-3284
Fax (800) 537-3927
Contact: [email protected]
Mayco Parts
800-306-2926
310-537-3700
Warranty Department
800-421-1244, Ext. 279 Fax:310-537-1173
310-537-3700, Ext. 279
Fax:800-672-7877
Fax:310-637-3284
Service Department
800-421-1244
Technical Assistance
800-478-1244
Fax:310-537-4259
Fax:310-631-5032
310-537-3700
^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668
MEXICO
MQ Cipsa
UNITED KINGDOM
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla72760Mexico
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420
Hanover Mill, Fitzroy Street,
Ashton-under-Lyne,
Lancashire OL7 0TL
Tel: 0161 339 2223
Fax: 0161 339 3226
CANADA
Multiquip
BRAZIL
Multiquip
4110IndustrielBoul.
Laval, Quebec, Canada H7L 6V3
Tel: (450) 625-2244
Fax: (450) 625-8664
Av. Evandro Lins e Silva, 840 - grupo 505 Tel: 011-55-21-3433-9055
Barra de Tijuca - Rio de Janeiro Fax: 011-55-21-3433-9055
© COPYRIGHT 2008, MULTIQUIP INC.
Multiquip Inc, the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the
property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data
contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or
the information published in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|