OperatiOn and parts Manual
series
MOdel MtX80sd
taMping raMMer
(rOBin er120d45000 gasOline engine)
Revision #0 (07/20/12)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
prOpOsitiOn 65 warning
page 2 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
nOtes
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
taBle Of COntents
rOBin er120d45000 engine
MtX80sd rammer
Proposition 65 Warning ........................................... 2
Parts Ordering Procedures...................................... 5
Safety Information ................................................ 6-9
Specifications ........................................................ 10
General Information............................................... 11
Components .......................................................... 12
Basic Engine.......................................................... 13
Inspection .............................................................. 14
Operation.......................................................... 15-16
Maintenance.......................................................... 17
Troubleshooting ................................................ 18-20
Explanation Of Code In Remarks Column............. 22
Suggested Spare Parts ......................................... 23
Crankcase Assembly ....................................... 38-41
Crankshaft, Piston Assembly............................ 42-43
Intake, Exhaust Assembly ................................ 44-45
Governor, Operation Assembly ........................ 46-47
Cooling Assembly............................................. 48-49
Starting Assembly ........................................... 50-51
Fuel Lubricant Assembly .................................. 52-53
Electric Device Assembly ................................. 54-55
Terms And Conditions Of Sale — Parts ................ 56
NOTICE
Specifications and part numbers are subject to change
without notice.
Component drawings
Nameplates And Decals................................... 24-25
Crankcase And Engine Assy............................ 26-29
Guide Cylinder Assy......................................... 30-31
Foot Assy.......................................................... 32-33
Fuel Tank And Handle Assy.............................. 34-35
Combination Lever Assy................................... 36-37
page 4 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
parts Ordering prOCedures
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
order via internet (Dealers only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
I view Parts Diagrams
I Order Parts
I Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
order via Fax (Dealers only):
All customers are welcome to order parts via Fax.
Domestic (uS) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (uS) Dealers Call:
order via phone:
1-800-427-1244
non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
when ordering parts, please supply:
Ì
Dealer account number
Ì
Specify preferred Method of Shipment:
Ì
Ì
Ì
Ì
Ì
Dealer name and address
ꢀ UPS/Fed Ex
ꢀ DHL
ꢀ Truck
I
I
Priority One
Ground
Shipping address (if different than billing address)
Return Fax number
I Next Day
Second/Third Day
applicable Model number
I
Quantity, part number and Description of each part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
We aCCepT all MaJoR CReDiT CaRDS!
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
Do not operate or service the equipment before reading
the entire manual. Safety precautions should be followed
at all times when operating this equipment.
Failure to read and understand the safety
messages and operating instructions could
result in injury to yourself and others.
Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.
SaFeTy MeSSageS
The four safety messages shown below will inform you
about potential hazards that could injure you or others.The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
DangeR, WaRning, CauTion or noTiCe.
SaFeTy SyMBolS
DangeR
Indicates a hazardous situation which, if not avoided,
Will result in DeaTH or SeRiouS inJuRy.
WaRning
Indicates a hazardous situation which, if not avoided,
CoulD result in DeaTH or SeRiouS inJuRy.
CauTion
Indicates a hazardous situation which, if not avoided,
CoulD result in MinoR or MoDeRaTe inJuRy.
NOTICE
Addresses practices not related to personal injury.
page 6 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
alWayS know the location of the nearest phone or keep a
phone on the job site. Also, know the phone numbers of
the nearest ambulance, doctor and fire department. This
information will be invaluable in the case of an emergency.
geneRal SaFeTy
CauTion
neveR operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
RaMMeR SaFeTy
DangeR
neveRoperatetheequipmentinanexplosive
atmosphereornearcombustiblematerials.An
explosion or fire could result causing severe
bodily harm or even death.
neveR operate this equipment when not
feeling well due to fatigue, illness or when
under medication.
neveR operate this equipment under the influence of
drugs or alcohol.
WaRning
neveR disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury,
bodily harm or even death.Disconnection of any of these
devices will void all warranties.
alWayS check the equipment for loosened threads or
bolts before starting.
Do noT use this machine on ground that is harder than
the machine can handle, or for driving pilings or tamping
rock beds. Furthermore, use of the machine on sloping
ground, such as the side of an embankment, may make
the machine unstable and can cause an accident. It can
also result in premature machine wear due to uneven
loads on the machine.
Do noT use the equipment for any purpose other than
its intended purposes or applications.
NOTICE
This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
Use the machine with confidence for tamping earth and
sand, soil, gravel, and asphalt.Do noT use the machine
for other types of jobs.
Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
CauTion
neveR lubricate components or attempt service on a
running machine.
neveR use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
NOTICE
alWayS keep the machine in proper running condition.
alWayS know the location of the nearest
fire extinguisher.
Fix damage to machine and replace any broken parts
immediately.
alWayS know the location of the nearest
first aid kit.
alWayS store equipment properly when it is not being
used.Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
engine SaFeTy
DangeR
Fuel SaFeTy
DangeR
The engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.
DO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fire due to static electricity.
The engine of this equipment
requiresanadequatefreeflow
of cooling air.neveR operate
thisequipmentinanyenclosed
ornarrowareawherefreeflow
of the air is restricted.If the air
flow is restricted it will cause
injury to people and property
and serious damage to the
equipment or engine.
WaRning
Do noT place hands or fingers inside engine
compartment when engine is running.
neveR operate the engine with heat shields or
guards removed.
Do noT start the engine near spilled fuel or combustible
fluids. Fuel is extremely flammable and its vapors can
cause an explosion if ignited.
Do noT remove the engine oil drain plug
while the engine is hot. Hot oil will gush
out of the oil tank and severely scald any
persons in the general area of the rammer.
alWayS refuel in a well-ventilated area, away from
sparks and open flames.
alWayS use extreme caution when working with
flammable liquids.
CauTion
neveR touch the hot exhaust manifold,
muffler or cylinder.Allow these parts to cool
before servicing equipment.
Do noT fill the fuel tank while the engine is running
or hot.
Do noT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
NOTICE
neveR run engine without an air filter or with a dirty air
filter.Severe engine damage may occur.Service air filter
frequently to prevent engine malfunction.
Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and flames.
neveR tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.
neveR use fuel as a cleaning agent.
Do noT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
page 8 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
safety infOrMatiOn
TRanSpoRTing SaFeTy
CauTion
NEvER allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
Before lifting, make sure that the equipment parts (hook
and vibration insulator) are not damaged and screws are
not loose or missing.
Always make sure crane or lifting device has been
properly secured to the lifting bail (hook) of the
equipment.
alWayS shutdown engine before transporting.
neveR lift the equipment while the engine is running.
Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
Use adequate lifting cable (wire or rope) of sufficient
strength.
Use one point suspension hook and lift straight
upwards.
Do noT lift machine to unnecessary heights.
alWayS tie down equipment during transport by
securing the equipment with rope.
Never allow any person or animal to stand underneath the
equipment while lifting.
enviRonMenTal SaFeTy
NOTICE
Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel filters.
Do noT use food or plastic containers to dispose of
hazardous waste.
Do noT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
speCifiCatiOns
Table 1. Rammer Specifications
39.37 in. (1000 mm)
Overall Height
Overall Width
13.89 in. (353 mm)
30.78 in. (782 mm)
13.4 x 11.2 in. (340 x 285 mm)
2.7 qt. (2.5 liters)
0.9 qt. (0.82 liter)
10.7 - 11.3
Over Length
Shoe Size (W x L)
Fuel Tank Capacity
Lubrication Oil Capacity
No. of Impacts Per Second
Impact Force
3,713 lbf (16.5 kN)
2 - 3.15 in. (50 - 80 mm)
181 lbs. (82 kg)
105 dB
Impact Plate Stroke
Operating Weight
Measured Sound Power Level
Guaranteed Sound Power Level
Max. Sound Pressure Level
107 dB
95 dB
Table 2. engine Specifications
Model
Type
Robin ER120D45000 Engine
Air-Cooled 4 Stroke, Overhead camshaft,
single cylinder gasoline engine
Piston Displacement
Max. Output
7.4 cu.in. (121 cc)
3.5 hp/3,600 rpm (2.6 KW)
Air-Cooled
Cooling System
Engine Oil Capacity
Fuel
0.4 qt. (0.35 liters)
Unleaded gasoline
Automobile Oil; Class SE or higher
Recoil Starter
Lubricant for Engine
Starting System
Spark Plug Type
NGK CR5HSB
page 10 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
general infOrMatiOn
The Multiquip MTX80SD tamping rammer is a powerful
compacting tool capable of applying a tremendous force
in consecutive impacts to a soil surface. Its applications
include soil compacting for road, embankments and
reservoirs as well as backfilling for gas pipelines, water
pipelines and cable installation work.
CauTion
Before starting operation check the lifting
handle to:
1. Make sure that there is no damage on the bolts.
The impact force of the MTX80SD levels and uniformly
compacts voids between soil particles to increase dry
density.
2. Make sure that there is no crack or breakage on
handle.
3. Make sure that there is no fissure on the surface.
If there is any abnormality or damage, replace
with new one.
Circular motion is converted to create impact force.
The MTX80SD tamping rammer develops a powerful
compacting force at the foot of the rammer. To maintain
optimum performance, proper operation and service are
essential.
For operation:
This handle is to be used to lift up the shoe part of
the machine with the body laid down on the ground
or truck bed.
The MTX80SD is equipped with an air cooled, four- cycle
gasoline engine. Transmission of the power takes place
by increasing the engine speed to engage the centrifugal
clutch.
1. Use proper lifting techniques to avoid back injury.
This handle is for manual lifting only.
The MTX80SD uses an oil bath lubrication system.Always
check the oil level through the oil level sight glass at the
rear of the tamper foot.
2. Do not use this handle as a rammer lift point. Use
the lifting point on the top of the machine.
3. Do not move the rammer with the lifting handle
and the front rollers more than 16 feet (5 meters).
Before starting the MTX80SD Tamping Rammer identify
and understand the function of the controls.
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
COMpOnents
3
2
4
10
5
1
9
6
11
12
7
8
13
Figure 1. MTX80SD Rammer
Figure 1 shows the location of the controls and components
for the MTX80SDTamping Rammer.The functions of each
control is described below:
8. Foot — Laminated wood with tempered steel plate for
superior shock absorption.
9. Fuel Tank — Holds the fuel for the unit (up to 2.7
quarts).
1. Combination (Throttle) lever — Used to adjust
engine speed (rpm). Move lever forward (SLOW) to
reduce engine speed, move lever back toward operator
(FAST) to increase speed.Always operate the rammer
at full speed (rpm).
10. Muffler — Reduces the noise of the engine when
running.
11. engine — This unit uses a Robin ER120D45000
gasoline engine.
2. Handle —To operate rammer, GRIP handle assembly
firmly on both sides.
12. oil gauge (Sight glass) — Indicates the level of oil in
the oil bath reservoir.
3. Fuel Tank Cap — Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tightened
securely. DO NOT over fill.
13. Drain valve — Open this valve to remove oil from the
bellows.
WaRning
4. Hook — Used to lift rammer for transporting.
Adding fuel to the tank should be
accomplished only when the engine is
stopped and has had an opportunity to
cool down. In the event of a fuel spill, DO
NOT attempt to start the engine until the
fuel residue has been completely wiped up, and the
area surrounding the engine is dry.
5. air Cleaner Cover — Protects the air cleaner which
prevents dirt and other debris from entering the engine.
6. Roller — Allows rammer to be moved around easily
by rolling the unit.
7. Bellows — Reservoir for oil bath.
page 12 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
BasiC engine
Figure 2. Robin ER120D45000 Engine
The engine (Figure 2) must be checked for proper lubri-
cation and filled with fuel prior to operation. Refer to the
engine manufacturer's manual for detailed operation and
service information.
5. Dipstick/oil Filler Cap — Remove this cap to
determine if the engine oil is low. Add oil through this
filler port as recommended in Table 3.
6. oil Drain plug — Remove this plug to remove oil from
the engine's crankcase.
1. Choke lever — Normally used in starting the engine in
cold weather conditions.In cold weather, turn the choke
lever to the fully closed position. In warm weather, set
the choke lever halfway or completely open.
WaRning
Engine components can generate
extreme heat. To prevent burns, Do
noT touch these areas while the
engine is running or immediately
after operating. neveR operate the
engine with the muffler removed.
2. Spark plug — Provides spark to the ignition system.
Set spark plug gap to 0.024 - 0.028 inch (0.6 - 0.7 mm).
Clean spark plug once a week.
3. Recoil Starter (pull rope) — Manual-starting method.
Pull the starter grip until resistance is felt, then pull
briskly and smoothly.
NOTICE
Operating the engine without an air filter, with a
damaged air filter, or a filter in need of replacement
will allow dirt to enter the engine, causing rapid engine
wear.
4. Muffler — Used to reduce noise and emissions.
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
inspeCtiOn
It is extremely important that this section be read carefully
before attempting to operate the rammer. Do noT use
your rammer until this section is thoroughly understood.
OIL LEVEL
DIPSTICK
CRankCaSe anD SpRing CylinDeR oil BaTH
This unit uses an oil bath lubrication system. Perform the
following:
1. Check the oil level through the oil level sight glass
(Figure 3) at the rear of the tamper foot.
Figure 5. Engine Oil Dipstick
OIL FILL PLUG
SIGHT GLASS
2. Low levels of oil may result in engine seizure due to
high levels of consumption during operation.
OIL DRAIN PLUG
3. Check the engine oil level and if the engine oil level is
low, it should be refilled. Use the proper motor oil as
suggested in the Table 3 below.
Table 3. Motor oil grade
Grade of motor oil
Season or Temperature
Figure 3. Foot Housing Sight Glass
(higher than MS class)
NOTICE
Spring, Summer or Autumn
SAE 30
+120° F to +15° F
The oil level should be kept at the half way point of the
sight glass.
Winter
+40° F to +15° F
SAE 30
2. If oil is not visible, add 10W-30 SE, SF or higher grade
motor oil into the oil fill plug opening (Figure 3). The
bath contains approximately 1.7 pints (800 cc.)
Below +15° F
SAE 10W-30
engine
geneRal inSpeCTion
1. Fill the fuel tank (Figure 4) with unleaded gasoline. At
the same time, check the engine oil and make it a habit
to replenish it often (Figure 5).
1. Check all nuts, bolts fasteners for tightness. Retighten
as necessary.
2. Clean any dirt from the recoil starter and foot pedestal.
Wipe the entire unit clean before operating.
3. Replace any missing or damaged Safety Operation
decals.
FUEL
TANK
4. Adjust height of handle. Adjust handle by loosening
nuts and moving handle to suit operation. Retighten
nuts.
Figure 4. Fuel Tank
page 14 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatiOn
3. Place the choke lever to the closed position.When the
weather is cold, close the choke all the way. When it
is hot, or if the engine is hot, open the choke a little or
leave it fully open.
CauTion
Failure to understand the operation of the Tamping
Rammer could result in severe damage to the unit or
personal injury.
iniTial STaRTup
When starting the MTX80SD Tamping Rammer perform
the following:
1. Slide the throttle lever from the stop to the idle position
( ) (Figure 6). This opens the fuel cock and the
engine electrical circuit is turned on automatically.
Figure 8. Choke Lever
4. Grip the starter rope handle (Figure 9) and pull it until
you feel a slight resistance. Then pull sharply and
quickly. Return the handle to the starter case before
releasing.
THROTTLE LEVER
(IDLE POSITION)
Figure 6. Throttle Lever (Idle Position)
STARTER
ROPE
2. Carburetor Purge System: Push the purge bulb four
times or until you see fuel in the bulb (Figure 7).
Figure 9. Recoil Starter
5. If engine fails to start, move the choke lever (Figure 8)
to the half open position to avoid flooding.
6. Repeat steps 1 thru 5.
7. If the engine does not start after repeated attempts,
check the spark plug for excess fuel.Clean and replace
the spark plug as needed.
Figure 7. Purge Bulb
NOTICE
Pumping the purge bulb removes air from the fuel
system. It does not pump fuel into the carburetor
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatiOn
opeRaTion
STopping THe engine
1. To start the rammer tamping action, move the throttle
1. Move throttle lever quickly from the STaRT to iDle
position (Figure 6) and run the engine for three minutes
at low speed.After the engine cools, move the throttle
lever to the STop position (Figure 11).The engine will
stop and the fuel cock is automatically closed.
lever (Figure 10) quickly from iDle to the STaRT (
position.Do noT move the throttle lever slowly as this
)
may cause damage to the clutch or spring.
THROTTLE LEVER
(START POSITION)
THROTTLE LEVE
(STOP POSITION
Figure 10. Throttle Lever (Start Position)
CauTion
Figure 11. Throttle Lever (Stop Position)
Make sure that the throttle lever is moved to the Full
STaRT position.Operating the rammer at less than full
speed can result in damage to the clutch springs or foot.
2. If the engine does not stop due to a problem with the
switch or the like, move the machine to a safe location
and hold the throttle lever in the stop position. Let the
machine run on idle and the machine will stop after a
few minutes.
2. The MTX80SD tamping rammer is designed to run
at 3,800 to 4,100 rpm. At optimum rpm the foot hits
at the rate between 590 - 695 impacts per minute.
Increasing throttle speed past factory set rpm does
not increase impacts and may damage unit. The
MTX80SD is designed to advance while tamping. For
faster advance, pull back slightly on the handle so that
rear of foot contacts soil first.
3. To stop the tamping action, move throttle lever quickly
from STaRT to iDle position (Figure 6).
page 16 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MaintenanCe
of 10W-30 SE, SF or higher grade motor oil. Oil should
be midway in sight glass.Break in oil should be changed
after first 50 hours.
Daily
Thoroughly remove dirt and oil from the engine and
control area.
OIL FILL PLUG
SIGHT GLASS
Clean or replace the air cleaner elements as necessary.
Check and retighten all fasteners as necessary.
OIL DRAIN PLUG
Check the spring box and bellows for oil leaks. Repair
or replace as needed.
eveRy 50 HouRS
Inspect in-line fuel filter (Part Number 26365012A3,
Figure 12) and replace if necessary.
Figure 14. Oil Drain Plug
eveRy 6 MonTHS
Clean the inside of the fuel tank with solvent.
Inspect and clean fuel strainer (Figure 15). Replace
strainer if necessary.
Figure 12. In-Line Fuel Filter
Remove and clean the spark plug, then adjust the spark
gap to 0.024~0.028 inch (0.6~0.7 mm).
FUEL
STRAINER
eveRy 80 To 100 HouRS
Remove the air cleaner cover. Loosen and remove
the 2 screws that hold the cover to the air cleaner
assembly. If the primary element (Figure 13) is dirty,
wash it with gasoline or kerosene. Then dip it in engine
oil (SAE10W-30) and wring the element so that 25 to 30
cc of engine oil remains on the element.
Figure 15. Fuel Strainer
eveRy 2yeaRS
Replace the fuel line every 2 years even if there is no
visible damage.
long TeRM SToRage
Slide the throttle lever to the STop position.
Drain any fuel including in the fuel hose.
Replace lubrication oil and apply grease to lubrication
points.
PRIMARY
ELEMENT
Cover the air intake on the air cleaner and the exhaust
outlet on the muffler.
Figure 13. Air Cleaner Primary Element
Store unit indoors covered with plastic sheet in moisture
free and dust free location out of direct sunlight.
eveRy 200 HouRS
Remove the oil drain plug on foot housing (Figure 14) and
drain the oil. Refill with approximately 1.7 pint (800 cc)
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
trOuBleshOOting
Troubleshooting (engine)
possible problem
Symptom
Solution
Combo lever in incorrect position?
Spark plug bridging?
Make sure combo lever is in start position.
Check gap, insulation or replace spark plug.
Clean or replace spark plug.
Carbon deposit on spark plug?
Short circuit due to deficient spark plug
insulation?
Check spark plug insulation, replace if worn.
Improper spark plug gap?
Fuel reaching carburetor?
Water in fuel tank?
Set to proper gap.
Check fuel line.
Flush or replace fuel tank.
Replace fuel filter.
Fuel filter clogged?
Stuck carburetor?
Difficult to start, fuel is available, but no spark at
spark plug.
Check float mechanism.
Check transistor ignition unit.
Spark plug is red?
If insufficient compression, repair or replace
engine. If injected air leaking, correct leak. If
carburetor jets clogged, clean carburetor.
Spark plug is bluish white?
Check transistor ignition unit is broken, and
replace defective unit. Check if voltage cord
cracked or broken and replace. Check if spark
plug if fouled and replace.
No spark present at tip of spark plug?
No oil?
Add oil as required.
ON/OFF switch is shorted?
Ignition coil defective?
Check switch wiring, replace switch.
Replace ignition coil.
Difficult to start, fuel is available, and spark is
present at the spark plug.
Improper spark gap, points dirty?
Condenser insulation worn or short circuiting?
Spark plug wire broken or short circuiting?
Set correct spark gap and clean points.
Replace condenser.
Replace defective spark plug wiring.
Flush fuel system, replace with correct type of
fuel.
Wrong fuel type?
Difficult to start, fuel is available, spark is
present and compression is normal.
Water or dust in fuel system?
Air cleaner dirty?
Flush fuel system.
Clean or replace air cleaner.
Close choke.
Choke open?
Suction/exhaust valve stuck or protruded?
Piston ring and/or cylinder worn?
Reseat valves.
Replace piston rings and/or piston.
Difficult to start, fuel is available, spark is
present and compression is low.
Cylinder head and/or spark plug not tightened
properly?
Torque cylinder head bolts and spark plug.
Head gasket and/or spark plug gasket damaged?
No fuel in fuel tank?
Replace head and spark plug gaskets.
Fill with correct type of fuel.
Apply lubricant to loosen fuel cock lever,
replace if necessary.
Fuel cock does not open properly?
No fuel present at carburetor.
Fuel filter/lines clogged?
Fuel tank cap breather hole clogged?
Air in fuel line?
Replace fuel filter.
Clean or replace fuel tank cap.
Bleed fuel line.
page 18 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
trOuBleshOOting
Troubleshooting (engine) - continued
possible problem
Symptom
Solution
Clean or replace air cleaner.
Check float adjustment, rebuild carburetor.
Clean or replace spark plug.
Set to proper gap.
Air cleaner dirty?
Improper level in carburetor?
Defective spark plug?
Weak in power, compression is proper and
does not misfire.
Improper spark plug?
Flush fuel system and replace with correct
type of fuel.
Water in fuel system?
Weak in power, compression is proper but
misfires.
Dirty spark plug?
Clean or replace spark plug.
Replace ignition coil.
Ignition coil defective?
Spark plug heat value incorrect?
Wrong type of fuel?
Replace with correct type of spark plug.
Replace with correct type of fuel.
Clean cooling fins.
Cooling fins dirty?
Engine overheats.
Clear intake of dirt and debris. Replace air
cleaner elements as necessary.
Intake air restricted?
Oil level too low or too high?
Governor adjusted incorrectly?
Governor spring defective?
Fuel flow restricted?
Adjust oil to proper level.
Adjust governor.
Rotational speed fluctuates.
Replace governor spring.
Check entire fuel system for leaks or clogs.
Recoil mechanism clogged with dust and dirt? Clean recoil assembly with soap and water.
Recoil starter malfunctions. (if applicable)
Spiral spring loose?
Replace spiral spring.
Ensure tight, clean connections on battery
and starter.
Loose, damaged wiring?
Starter malfunctions.
Battery insufficiently charged?
Recharge or replace battery.
Replace starter.
Starter damaged or internally shorted?
Check and clean valves. Check muffler and
replace if necessary.
Over-accumulation of exhaust products?
Wrong spark plug?
Burns too much fuel.
Replace spark plug with manufacturer's
suggested type.
Lubricating oil is wrong viscosity?
Worn rings?
Replace lubricating oil with correct viscosity.
Replace rings.
Exhaust color is continuously "white".
Air cleaner clogged?
Clean or replace air cleaner.
Adjust choke valve to correct position.
Choke valve set to incorrect position?
Carburetor defective, seal on carburetor
broken?
Exhaust color is continuously "black".
Replace carburetor or seal.
Poor carburetor adjustment, engine runs too
rich?
Adjust carburetor.
ON/OFF device not activated ON?
Battery disconnected or discharged?
Ignition switch/wiring defective?
Turn on ON/OFF device.
Check cable connections. Charge or replace
battery
Will not start, no power with key "ON". (if
applicable)
Replace ignition switch. Check wiring.
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
trOuBleshOOting
Troubleshooting (Rammer)
possible problem
Symptom
Solution
Operating speed of throttle lever is
incorrectly set?
Set throttle lever to correct position.
Oil in excess?
Clutch slips?
Spring Failure?
Drain excess oil. Bring to correct level.
Replace or adjust clutch.
Engine runs but rammer jumps
erratically or not at all.
Replace spiral spring.
Adjust engine speed to correct
operating RPM setting.
Speed of engine improper?
Soil over-compacted?
Shut down machine and test soil.
page 20 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
nOtes
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
eXplanatiOn Of COde in reMarks COluMn
The following section explains the different symbols and
QTy. Column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
numbers used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
SaMple paRTS liST
ReMaRkS Column
no. paRT no. paRT naMe
QTy. ReMaRkS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT .....................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN. ..........NOT SOLD SEPARATELY
WASHER, 3/8 IN. ..1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOvE
assembly/kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
no. Column
Indicated by:
unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate item numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOvE”
“S/N XXXX TO S/N XXX”
Specific Model number use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
paRT no. Column
numbers used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“Make/obtain locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
page 22 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
suggested spare parts
MTX80SD TaMping RaMMeR WiTH RoBin eR120D4500 engine
1 to 3 units
Qty.
1............956100062............THROTTLE WIRE
p/n
Description
3............366010070............PRIMARY ELEMENT, AIR CLEANER
3............366010080............SECONDARY ELEMENT, AIR CLEANER
1............366350460............CAP, FUEL TANK WITH STRAP
2............26365012A3 .........FILTER, IN-LINE FUEL
3............0650140860..........SPARK PLUG
1............954406010............STRAINER, #110 FUEL TANK
1............21E5011008 .........ROPE, RECOIL STARTER
1............956200110............COMBINATION LEvER
1............366900170............CUP AND PACKING SET
1............366348550............CLUTCH ASSY.
NOTICE
Part numbers on this Suggested Spare Parts list may
supersede/replace the part numbers shown in the
following parts lists.
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
naMeplates and deCals
4
1
7
10
WARNING
Operation of this equipment may create sparks
that can start fires around dry vegetation.
A spark arrestor may be required.
The operator should contact local fire agencies
for laws or regulations relating to fire prevention
requirments.
<
E10)
=
Gasoline Only
(
Essence Uniquement
Bitte nur Benzin elnfullen
Usare solo Benzina
Solo para Gasoline
2
3
5
9
6
11
8
A (DECAL SET)
series
quick manual
page 24 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
naMeplates and deCals
no.
1
paRT no.
920215440
paRT naMe
DECAL: OPERATION
DECAL: AIR CLEANER
DECAL: LEvER OPERATION
DECAL: MAX SPEED
DECAL: MACHINE STOP
DECAL: EC NOISE REQ Lwa 107 dB
DECAL: ANTI-vIB HANDLE
QUICK MANUAL
DECAL: CHOKE OPERATION
DECAL: E/G FIRE WARNING
QTy.
ReMaRkS
1
1
1
1
1
1
1
1
1
1
2#
3#
4#
5#
6#
7#
8
9
10
11
920212540
0732004430
920214100
DECAL: NAMEPLATE .......................................1................CONTACT MQ PARTS DEPT.
W/ SERIAL NO.
DECAL SET ......................................................1................INCLUDES ITEMS W/ #
A
920900040
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
CrankCase and engine assy
46
43
47
44
44
47
75-1
75-2
75-3
35-4
35-3
35-2
35-1
70
74
76
35
35-7
35-9
35-8
80
39
78
40-1
59
55-1
55-2
35-5
40-2
40-3
37
36
37
52
53
54
31-1
31-2
48
38
41-2
48
79
111
22
41-1
25
49
34
33
77
55-2
55-1
49
23
24-2
24-1
32
30
57
58
45
27
4
2
2
26
1
79
79
59
56
59
A
79
53
54
60
56
16
15
62-2
62-1
51
8
55-2
55-1
13
A
101
10
9
11
5
3
7
6
18
106
14
12
19
81
20
page 26 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
CrankCase and engine assy
no.
1
2$
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
22
23
paRT no.
366910010
009120204
041006007
366345170
060404010
080200350
080100620
040006207
040006305
080100720
080200350
JISB2804C
366345230
040006304
080100520
080200200
047940060
050710080
009110025
366348550
952401450
paRT naMe
CRANKCASE ....................................................1................INCLUDES ITEMS W/$
QTy.
ReMaRkS
STUD BOLT 10 X 30
BEARING 6007Z
PINION, DRUM
OIL SEAL TC-40528
STOP RING S-35
STOP RING R-62
BEARING 6207
BEARING 6305
STOP RING R-72
STOP RING S-35
STOP RING S-25
CONNECTING ROD
BEARING 6304
STOP RING R-52
STOP RING S-20
NEEDLE BEARING FJ-1816
O-RING AS568-267
SOCKET HEAD BOLT 8X25 ZN
CLUTCH ASSY.
WASHER 8.5X22X3
BOLT 8X25 T
WASHER, LOCK M8
FLANGE, ENGINE
FLANGE BOLT 8X30
FLANGE NUT M10 H
BRACKET, SHOCK ABSORBER
BOLT 10X30 H
WASHER, LOCK M10
STOPPER RUBBER (70)
WASHER, LOCK M8
NUT M8
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
1
1
1
1
1
4
4
1
4
4
1
1
1
24-1 001220825
24-2 030208200
25
26
27
30
31-1 012010030
31-2 030210250
32
33
34
35
366217180
001710830
022611010
366346280
939010270
030208200
020108060
366900010
AIR CLEANER ASSY.........................................1................INCLUDES ITEMS W/#
35-1# 366010010
35-2# 366010020
35-3# 366010030
35-4# 366010040
35-5# 366010050
35-7# 366010070
35-8# 366010080
35-9# 362030040
AIR CLEANER COvER
WASHER, FLAT M6
WASHER, LOCK M6
1
2
2
2
1
1
1
1
1
2
1
1
COIN BOLT M6
BASE CP, AIR CLEANER
PRIMARY ELEMENT CP
SECONDARY ELEMENT
GRIP BOLT CP, AIR CLEANER
PIPE, INTAKE
CYCLONE CLAMP (CY-1) 38
SEALING FORM, UNDER
SEALING FORM, SIDE
36
37
38
39
366350540
954407682
366460160
366460150
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
CrankCase and engine assy
46
43
47
44
44
47
75-1
75-2
75-3
35-4
35-3
35-2
35-1
70
74
76
35
35-7
35-9
35-8
80
39
78
40-1
59
55-1
55-2
35-5
40-2
40-3
37
36
37
52
53
54
31-1
31-2
48
38
41-2
48
79
111
22
41-1
25
49
34
33
77
55-2
55-1
49
23
24-2
24-1
32
30
57
58
45
27
4
2
2
26
1
79
79
59
56
59
A
79
53
54
60
56
16
15
62-2
62-1
51
8
55-2
55-1
13
A
101
10
9
11
5
3
7
6
18
106
14
12
19
81
20
page 28 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
CrankCase and engine assy
no.
paRT no.
paRT naMe
BOLT 8X55 T
WASHER, LOCK M8
WASHER, FLAT M8
BOLT 8X15 H
WASHER, LOCK M8
COvER, CLEANER ASSY. (UPPER)
RUBBER BUSH (10X16X17)
COvER, CLEANER ASSY. (UNDER)
KNOB, CLEANER COvER
O-RING P6
FLANGE BOLT 8X20
SQUARE NUT M8
GUARD, LINK
QTy.
2
2
2
2
2
1
2
1
2
2
4
4
1
1
2
2
4
4
2
1
4
4
1
ReMaRkS
40-1 001220851
40-2 030208200
40-3 0401450080
41-1 011008015
41-2 030208200
43
44
45
46
47
48
49
51
52
53
54
366217340
366460140
366217350
366345980
050200060
009110040
959407670
366120410
366120420
022910260
366460170
GUARD, MUFFLER
WELL NUT M8
FLANGE COLLAR 8
SOCKET HEAD BOLT 8X20 ZN
WASHER, FLAT M8
SOCKET HEAD BOLT 8X30 ZN
CROSS BAR
SOCKET HEAD BOLT 6X25 ZN
WELL NUT M6
GUARD, ENGINE
55-1 009110024
55-2 0401450080
56
57
58
59
60
009110038
368217770
009110039
022910250
366120430
62-1 009110025
62-2 0401450080
SOCKET HEAD BOLT 8X25ZN
WASHER FLAT M8
COMBINATION LEvER ASSY. W/WIRE............1................INCLUDES ITEMS W/@
4
4
70
366900042
74@ 956100062
75-1 001220620
75-2 030206150
75-3 031106100
THROTTLE WIRE
BOLT 6X20 T
WASHER, LOCK M6
WASHER, FLAT M6
NUT M6
CLIP (TCP2-10509B)
WIRE HARNESS
COLLAR, GUARD
SPIRAL TUBE KEP6/L=200
CRANK GEAR
1
2
2
2
2
1
1
8
1
1
1
1
76
77
020106050
959006120
367460120
366461050
959021814
366345190
366010121
911231201
78
79
80
101
106
111
FRONT COvER
ENGINE ASSY., ER120D45000
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
guide Cylinder assy
32
1
2
20
3
22-2
22-1
9
21
12
24
27
8
17
14
18
16
28
26
25
29
13
15
23
29
9
27
28
25
26
7
24
31
30
52
4
6
51
5-2
5-1
53
page 30 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
guide Cylinder assy
no.
1
2
3
4
5-1
5-2
6
7
8
paRT no.
366460100
366459910
366346000
371459690
001121230
030212300
952404790
355447260
366459900
366459730
366345990
366217210
050100900
001521020
001521040
953405270
953405260
367217450
050710070
paRT naMe
PISTON PIN
PLUG, PISTON PIN
PISTON ROD
PISTON END
BOLT 12X30 T P1.5
WASHER, LOCK M12
WASHER 13306
STOPPER, LOWER
STOPPER, BOTTOM
MAIN SPRING
SPRING CYLINDER
FOOT PLATE 12
O-RING G-90
SOCKET HEAD BOLT 10X20 T
SOCKET HEAD BOLT 10X40 T
PLUG 1/4X14 13L
PACKING 1/4 (CU)
GUIDE CYLINDER
O-RING AS568-344
BOLT 10X45 H
WASHER, LOCK M10
BELLOWS, ORANGE
O-RING JASO3150
BELLOWS CLAMP (1.6T) 171D
BAND GUIDE, BELLOWS
BOLT 8X40 T
QTy.
1
2
1
1
1
1
1
1
1
2
1
1
1
4
4
1
1
1
1
4
4
1
2
2
2
2
2
2
1
1
1
1
1
1
ReMaRkS
9
12
13
14
15
16
17
18
20
21
22-1 0105051045
22-2 030210250
23
24
25
26
27
28
29
30
31
32
51
52
53
354010010
050931500
354336352
354442340
001220840
020308060
354446170
953405270
953405260
050200950
366118590
366460300
953404670
NUT M8
PIN 6D-8.5L
PLUG 1/4X14 13L
PACKING 1/4 (CU)
O-RING P-95
PROTECTION SLEEvE
OIL GAUGE ASSY.
COPPER PACKING 17X25.5X1
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
fOOt assy
2
3
6
2
3
9
8
9
8
1
14
15
4
5
page 32 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
fOOt assy
no.
1
paRT no.
8511S
paRT naMe
FOOT ASSY 285 ...............................................1................INCLUDES ITEMS W/ #
QTy.
ReMaRkS
2
3
4
5
0227-11214
030212300
009110034
009110035
363343390
030210250
022711012
009110036
009110033
NYLON NUT M12
WASHER, LOCK M12
BOLT, SQUARE NECK 12X65
BOLT, SQUARE NECK 12X95
GRIP HANDLEBAR
WASHER, LOCK M10
NYLON NUT M10
BOLT, SQUARE NECK 10X55
BOLT, SQUARE NECK 10X50
4
4
2
2
1
7
7
3
4
6
8#
9#
14#
15#
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
fuel tank and handle assy
9
10
54
51
53
23
56
22
11-1
55
14
15
11-2
11-3
18
17
3
B
A
57
58
59
16
12
11
12
11
4-1
4-2
112
7
13
11
111
6
B
40
5
43
102
20
101
102
41
19
A
43
4-2
4-1
42
104
20
41
102
105
42
113
112
106
1
102
2-2
2-1
page 34 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
fuel tank and handle assy
no.
1
2-1
2-2
3
4-1
4-2
5
6
7
9
10
11
paRT no.
366346270
014210020
033121009
367119052
001211020
030210250
939010270
030208200
020108060
366350460
366120250
022710809
paRT naMe
QTy.
2
4
4
1
4
4
1
1
1
1
1
3
ReMaRkS
SHOCK ABSORBER W/PIN
SOCKET HEAD BOLT 10 X 20 T
TOOTHED LOCK WASHER B M10
HANDLE
BOLT 10X20 H
WASHER, LOCK M10
STOPPER RUBBER (70)
WASHER, LOCK M8
NUT M8
CAP ASSY., FUEL TANK
FUEL TANK/MTX70
NYLON NUT M8
11-1 011208025
11-2 030208200
11-3 0401450080
BOLT 8X25 H
3
3
3
2
1
1
1
WASHER, LOCK M8
WASHER, FLAT M8
WASHER, 8.5X22X3
WASHER, FLAT M8
STRAINER #508
PACKING, FUEL TANK
HOLDER, FILTER..............................................1................INCLUDES ITEMS W/ $
BOLT 5X15 H
WASHER, LOCK M5
FUEL HOSE L=90
HOSE CLAMP
TAPPING SCREW 5X20
PAN HEAD SCREW 4X8
ROLLER
12
13
14
15
16
17
18
19
20
22
23
41
42
43
44#
45#
51
53
54
55
56
952401450
0401450080
954406010
050250420
366350580
001200515
030205130
959328406
0561080020
009110037
094010053
366217170
0017105020
022610505
366464260
366464270
955010311
980010400
366345620
454010020
954010270
3
3
1
2
2
4
2
4
4
1
1
1
1
1
5
1
1
1
SCREW 5X20
FLANGE NUT M5 H
CUP, HOLDER FILTER
PACKING, HOLDER FILTER
TP22 TACHO/HOUR METER
CURL CORD
FINISHER, METER
CLAMP TC100
CLIP AB-3N
57&$ 366464260
58&$ 366464270
CUP, HOLDER FILTER
PACKING, HOLDER FILTER
59$
101
102
104
105
106
107
111
112
113
366900170
959328402
0561080020
26365012A3
959328403
954407720
959021824
959028301
954408170
959021814
CUP AND PACKING SET..................................1................INCLUDES ITEMS W/ &
FUEL HOSE 5.5X8.5X170
HOSE BAND
1
4
1
1
1
1
1
2
1
FILTER, IN-LINE FUEL
FUEL HOSE 5.5X8.5X260
TUBE, vINYL L180
SPIRAL TUBE D=6, L=200
RETURN HOSE 3X6X600
HOSE CLIP 5
SPIRAL TUBE 6D-200L
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
COMBinatiOn leVer assy
A
4
B
7
8
3
7
11
1
13
10
2
BODY
5
14
11
6
12
9
page 36 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
COMBinatiOn leVer assy
no.
A
B
paRT no.
366900032
956200110
paRT naMe
QTy.
ReMaRkS
COMB. LEvER W/ THROTTLE WIRE...............1................INCLUDES ITEMS W/@
COMB. LEvER W/OUT THROTTLE WIRE........1................INCLUDES ITEMS W/#
1@# 366349430
2@# 366010310
3@# 366010190
4@# 366010200
5@# 366010210
6@# 366010220
7@# 020408050
8@# 959407650
9@# 366010320
10@ 956100062
11@# 094010051
12@# 094010052
13@# 050200150
14@# 050200110
FUEL COCK
LEvER
SLlDER
END CAP
WIRE CAP
BOLT AND WASHER SET
NUT M8, H=5
SOCKET HEAD SCREW/THROTTLE WIRE
STOP SWITCH
THROTTLE WIRE
TAPPING SCREW B1 4X12
TAPPING SCREW B1 4X30
O-RING, P15
1
1
1
1
1
1
2
1
1
1
4
1
1
1
O-RING, P11
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
tOOls
page 38 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
tOOls
no.
1
2
3
4
paRT no.
981010400
983010060
983910030
009110044
paRT naMe
QTy.
ReMaRkS
CLUTCH PULLER A
CLUTCH MOUNTER
PISTON ROD HOLDER
SOCKET HEAD BOLT 8X50 (FULL THREAD)
CRANK GEAR REMOvER
CLUTCH PULLER B
1
1
1
2
1
1
1
5
6
7
983910021
983010042
983910010
SPRING CYLINDER REMOvER
PISTON END REMOvER
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — CrankCase assy.
710
675
630
680
645
690
26
60
610
70
10
620
40 50 85
30 75
700
330
340
210
952 230
260
250
268
90
285
280
80
942
953
301
300
117
115
941
948
114
113
940
954
830
820
840
810
860
960
GASKET SET
page 40 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — CrankCase assy.
no.
10
paRT no.
21E10101M1
paRT naMe
CRANKCASE CP ..............................................1................INCLUDES ITEMS W/#
QTy.
ReMaRkS
26@ 20F1601001
STEM SEAL
OIL SEAL
BALL BEARING
DOWEL PIN
STUD
STUD
OIL SEAL
FLANGE BOLT
PLUG
GASKET(ALUMINIUM)
PLUG
O-RING
SUCTION PIPE
FLANGE BOLT
1
1
1
2
2
2
1
1
1
1
1
1
1
2
30#
40#
50#
60
0440200070
X600200200
20F0060023
X105080550
X105060470
X440080010
0110080150
0403140010
X211080050
21E65001H2
0240110020
21E64201J3
X110050030
21E11001L1
70
75#
80
85#
90
113
114
115
117
210
MAIN BEARING COvER CP ............................1................INCLUDES ITEMSW/$
230$ X600220030
BALL BEARING
1
1
1
2
1
1
6
1
1
1
250
260
268
280
285
300
301
330
340
610
620
630
645
680
690
700
710
810
820
830
840
860
940
941
942
948
952
21E45001J1
21E41901H3
20F0060023
X213160030
21E63601H1
0110080160
X119060110
21E17001H3
0011305100
21E13001L0
21E1500113
X110080460
21E18001H3
21E15501H3
21E1600101
20F1501103
X110060610
21E14301H3
21E14401H1
21E16002H3
21E16003H3
0110060230
21E63901H3
21E63902H3
21E64001L1
0110060440
21E76301H1
GOvERNOR GEAR CP
GOvERNOR SLEEvE
DOWEL PIN
GASKET
OIL GAUGE CP
FLANGE BOLT
BOLT (SOCKET HEAD)
OIL SHELTER PLATE
BOLT AND WASHER ASSY
CYLINDER HEAD ASSY ..................................1................INCLUDES ITEMS W/@
GASKET(HEAD)
FLANGE BOLT
GUIDE (S.PLUG)
ROCKER COvER
GASKET CP (R.COvER)
PIPE KNOCK
1
4
1
1
1
2
2
1
1
1
1
4
1
1
FLANGE BOLT
BREATHER COvER
BREATHER PLATE CP
GASKET (B.PLATE)
GASKET (B.COvER)
FLANGE BOLT
INNER ROTOR
OUTER ROTOR
OIL PUMP COvER CP .....................................1................INCLUDES ITEMS W/%
FLANGE BOLT
SWITCH OIL PRESSURE
OIL SEAL
O-RING
GASKET SET
4
1
1
1
1
953% 0440200070
954
960
0240590020
21E9900117
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — Crankshaft, pistOn assy.
380
370
350
360
310
50
320
10
70
40
41
42
page 42 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — Crankshaft, pistOn assy.
no.
10
40
41
42
50
70
310
paRT no.
paRT naMe
CRANKSHAFT CP
SPACER
SPACER
SPACER
QTy.
ReMaRkS
21E20201K1
X230220100
X230220110
X230220120
0180140020
0053203101
21E22501J0
1
1
1
1
1
1
FLANGE NUT
WOODRUFF KEY
CONNECTING ROD ASSY ..............................1................INCLUDES ITEMS W/ #
320# 20F2300103
CONNECTING ROD BOLT
PISTON PIN
PISTON STD
PISTON O.S. 0.25
PISTON O.S. 0.50
PISTON RING SET, STD
PISTON RING SET, 0.25 O.S
PISTON RING SET, 0.50 O.S.
CLIP
2
1
1
1
1
1
1
1
2
350
360
360
360
370
370
370
380
21E23301H3
21E23401H3
21E23403H3
21E23404H3
21E23501H7
21E23502H7
21E23503H7
21E2500103
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — intake, eXhaust assy.
350
230
240
220
320
200
231
241
310
225
340
360
367
95
70
60
95
70
60
360
367
567
560
290
565
550
551
530
10
90
80
150
540
23
27
A
562
850
855
700
570
853
A
page 44 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — intake, eXhaust assy.
no.
10
23
27#
60
70
80
90
95
150
200
220
225
paRT no.
paRT naMe
CAM PULLEYCP
QTy.
ReMaRkS
21E31601L1
21E35101H1
0240060010
2793360103
2693370103
27633401H3
27633501H3
20F10KA031
21E3560103
2773500403
21E36101H0
21E36102H0
1
PIN (CAM PULLEY) CP ....................................1................INCLUDES ITEMS W/ #
O-RING
1
2
2
1
1
4
1
1
vALvE SPRING
SPRING RETAINER
INTAKE vALvE
EXHAUST vALvE
COLLET vALvE
TIMING BELT
PIN (ROCKER)
ROCKER ARM INTAKE ASSY ..........................1................INCLUDES ITEMS W/ $
ROCKER ARM EXHAUST ASSY ......................1................INCLUDES ITEMS W/ @
230$ 20A0140100
231@ 20A0140100
240$ 20A0180100
241@ 20A0180100
ADJUST SCREW
ADJUST SCREW
NUT
NUT
FLANGE BOLT
MUFFLER UN
MUFFLER COvER UN
BOLT AND WASHER ASSY
WASHER
GASKET (MUFFLER)
SELF LOCK NUT
GASKET (CARB.)
INSULATOR 2
1
1
1
1
1
1
1
2
2
1
2
1
1
1
1
1
2
1
2
2
1
1
1
1
290
310
320
360
367
340
350
530
540
550
551
560
562
565
567
570
700
850
853
855
20F0060010
21E30101K2
21E34201L2
X130060330
0200060120
21E35201H3
0176080020
1066500203
21E32902J3
2823590103
21E35001H3
21E35002H3
20F6060020
21E32901H3
0100050110
0176050010
21E33001H3
21E16103H3
0561130010
21E19001H3
GASKET (INSULATOR)
GASKET (INSULATOR)
GASKET (CARB)
SELF LOCK NUT
INSULATOR 1
BOLT
SELF LOCK NUT
INTAKE PIPE (D)
RUBBER PIPE
HOSE CLAMP
SPIRAL TUBE
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — gOVernOr, OperatiOn assy.
230
240
260
202
270
293
200
255
210
213
280
293
215
35
30
40
20
10
50
80
26
50
70
60
page 46 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — gOVernOr, OperatiOn assy.
no.
10
20
26
30
35
40
50
paRT no.
paRT naMe
QTy.
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
ReMaRkS
21E42301H3
21E42201J3
20F1108000
21E42701J1
2844560103
21E4280103
0031306000
20F1406300
0186060020
21E4250113
21E43301J0
21E46002J1
0043104140
0230100040
2264500313
X140050110
0021705000
0217100020
X140050110
0021705000
2264310301
20F0060010
GOvERNOR LEvER
GOvERNOR SHAFT
WASHER
GOvERNOR ROD CP
LINKAGE BUSHING
ROD SPRING
CLIP
60
70
80
BOLT AND WASHER ASSY
NUT
GOvERNOR SPRING
SPEED CONT. LEvER ASSY
BASE PLATE CP
SCREW, PANHEAD
SPACER
RETURN SPRING
SCREW
NUT
FRICTION WASHER
SCREW
NUT
LINK PIvOT CP
FLANGE BOLT
200
202
210
213
215
230
240
255
260
270
280
293
1
1
1
1
1
2
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — COOling assy.
40
40
40
40
90
95
95
page 48 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — COOling assy.
no.
40
90
95
paRT no.
paRT naMe
QTy.
ReMaRkS
X130060340
21E52601H3
20F0060010
BOLT AND WASHER ASSY
CYLINDER BAFFLE
FLANGE BOLT
4
1
3
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — starting assy.
210
214
211
280
213
212
217
215
216
218
249
page 50 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — starting assy.
no.
210
paRT no.
21E50201L0
paRT naMe
RECOIL STARTER ASSY .................................1................INCLUDES ITEMS W/ #
QTy.
ReMaRkS
211# 20F5011508
212# 21ES022008
213# 21E5011008
214# 20F5010018
215# 20F5022508
216# 2745013108
217# 2275013508
218# 21E5026008
249# 20B5010108
280# 21E5015018
SPIRAL SPRING
REEL
STARTER ROPE
STARTER KNOB
RATCHET
FRICTION SPRING
RETURN SPRING
RATCHET GUIDE
SET SCREW
1
1
1
1
2
1
2
1
1
1
STARTER CASE CP
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — fuel luBriCant assy.
210
905
918
902
917
907
921
909
947
946
945
910
912
929
919
917,947
904
948
943
900
966
903
966
906
916
908
927
920
926
915
925
911
914
961
967
962
968
page 52 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — fuel luBriCant assy.
no.
210
paRT no.
21E6240100
paRT naMe
CARBURETOR ASSY .......................................1................INCLUDES ITEMS W/#
QTy.
ReMaRkS
900# 5016004010
902# 2526261308
903# 2526261208
904# 1616233508
905# 2846260308
906# 5106045040
907# 2846260408
908# 1616255208
909# 1476258408
910# 1616238008
911# 2526261808
912# 2526261008
914# 2526261708
915# 2526261908
916# 1066257608
917# 1476257308
918# 2846260008
919# 1616245408
920# 1616245108
921# 1476258308
925# 1616236808
926# 1616236908
927# 1476257508
929# 1616238508
943# 2526261108
945# 1616255108
946# 2526260308
947# 1616255308
948# 2526260208
961# 2526261408
962# 2526261508
966# 1476258608
967# 2526261608
968# 2526262008
SCREEN INLET
COvER PUMP
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
4
SHAFT THROTTLE
vALvE THROTTLE
SHAFT ASSY CHOKE
CLIP THROTTLE SHAFT
vALvE CHOKE
vALvE, INLET NEEDLE
BALL
GASKET, PUMP
GASKET, METERING DIA.
DIAPHRAGM PUMP
DIAPHRAGM ASSY,METERING
SCREW
SCREW ASSY
SCREW vALvE
SCREW
SPRING
SPRING, METERING LEvER
SPRING CHOKE
PIN, METERING LEvER
LEvER, METERING
PLUG WELCH
SCREW, IDLE ADJ.
SPRING PUMP
STOP THROTTLE
LEvER THROTTLE
SCREW
SPACER THROTTLE LEvER
BODY ASSY AIR PURGE
PUMP PRIMER
SEAL
COvER PRIMER PUMP
SCREW ASSY
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — eleCtriC deViCe assy.
112
100
30
76
75
11
70
10
page 54 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
rOBin er120d45000 engine — eleCtriC deViCe assy.
no.
10
11
30
70
75
76
paRT no.
paRT naMe
FLY WHEEL CP
IGNITION COIL CP
BOLT AND WASHER ASSY
SCREW AND WASHER ASSY
PLATE
WIRE BAND
SPARK PLUG
SPARK PLUG RUBBER CAP
QTy.
ReMaRkS
21E79230J1
21E79430J1
20F1406250
X131040130
21E76501H3
0563000100
0650140860
21E75001J3
1
1
2
2
1
1
1
1
100
112
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
terMs and COnditiOns Of sale — parts
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
payMenT TeRMS
Terms of payment for parts are net 30 days.
FReigHT poliCy
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
SpeCial eXpeDiTing SeRviCe
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
liMiTaTionS oF SelleR’S liaBiliTy
MiniMuM oRDeR
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
ReTuRneD gooDS poliCy
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
liMiTaTion oF WaRRanTieS
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
pRiCing anD ReBaTeS
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
page 56 — MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
nOtes
MTX80SD RaMMeR • opeRaTion anD paRTS Manual — Rev. #0 (07/20/12) — page 57
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatiOn and parts Manual
HERE’S HOW TO GET HELP
PLEASE HAvE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
United StateS
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: [email protected]
Tel. (800) 421-1244
Fax (310) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Service Department
Warranty Department
800-421-1244
310-537-3700
Fax: 310-537-4259
Fax: 310-943-2238
800-421-1244
310-537-3700
Fax: 310-943-2249
Technical Assistance
800-478-1244
mexico
United Kingdom
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: [email protected]
Tel: (52) 222-225-9900
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Fax: (52) 222-285-0420 Globe Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: [email protected]
Fax: 0161 339 3226
Canada
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: [email protected]
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2012, MULTIQUIP INC.
Multiquip Inc, the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
This manual MUsT accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|