PARTS MANUAL
StreetPro SERIES
MODEL SP6457
PROFESSIONAL PAVEMENT SAW
(DEUTZ 57 HP DIESEL ENGINE)
Revision #3 (11/29/10)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
PROPOSITION 65WARNING
Diesel engine exhaust and some of
PAGE 2 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
SILICOSIS/RESPIRATORYWARNINGS
WARNING WARNING
SILICOSIS WARNING
RESPIRATORY HAZARDS
Grinding/cutting/drilling of masonry, concrete, metal and
other materials with silica in their composition may give
off dust or mists containing crystalline silica. Silica is a
basic component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Repeated and/or
substantial inhalation of airborne crystalline silica can
cause serious or fatal respiratory diseases, including
silicosis. In addition, California and some other
authorities have listed respirable crystalline silica as a
substance known to cause cancer. When cutting such
materials, always follow the respiratory precautions
mentioned above.
Grinding/cutting/drilling of masonry, concrete, metal and
other materials can generate dust, mists and fumes
containing chemicals known to cause serious or fatal
injury or illness, such as respiratory disease, cancer,
birth defects or other reproductive harm. If you are
unfamiliar with the risks associated with the particular
process and/or material being cut or the composition of
the tool being used, review the material safety data
sheet and/or consult your employer, the material
manufacturer/supplier, governmental agencies such as
OSHA and NIOSH and other sources on hazardous
materials. California and some other authorities, for
instance, have published lists of substances known to
cause cancer, reproductive toxicity, or other harmful
effects.
Control dust, mist and fumes at the source where
possible. In this regard use good work practices and
follow the recommendations of the manufacturers or
suppliers, OSHA/NIOSH, and occupational and trade
associations. Water should be used for dust
suppression when wet cutting is feasible. When the
hazards from inhalation of dust, mists and fumes cannot
be eliminated, the operator and any bystanders should
always wear a respirator approved by NIOSH/MSHA for
the materials being used.
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Bladeguard (16-36") Assembly .......................... 64-65
Bladeguard (42") Assembly ............................... 66-67
Bladeguard (48") Assembly ............................... 68-69
Bladeguard Mount/Wiper Assembly .................. 70-71
Depth Stop Meter/Cable Assembly.................... 72-73
Depth Stop Cylinder/Valve Assembly................. 74-75
Front Axle Assembly .......................................... 76-77
Cable Mount Assembly ...................................... 78-79
Wiring Harness/Circuit Breaker Assy. ................ 80-81
Water Pump Kit Assembly.................................. 82-83
Gearbox Seal Kit Assembly ............................... 84-85
Bushing Extension Kits Assembly ...................... 86-87
Collar/Flange Puller Assy. (Option) .................... 88-89
Seal Sleeve Puller Assy. (Option)....................... 90-91
Tools ................................................................... 92-93
SP6457 StreetPro
Professional Pavement Saw
Proposition 65 Warning ............................................. 2
Silicosis/RespiratoryWarnings .................................. 3
Table Of Contents ..................................................... 4
Parts Ordering Procedures ....................................... 5
Explanation Of Codes In Remarks Column .............. 6
Suggested Spare Parts ............................................. 7
Component Drawings
Console Mounting Assembly ................................. 8-9
Deck/Gauge Panel Assembly............................. 10-11
Nameplate and Decals Assembly ...................... 12-13
Access Panel Assembly ..................................... 14-15
F-N-R Control and Handle Assembly ................ 16-17
Joystick Mounting Assembly .............................. 18-19
Fuel Tank Assembly ........................................... 20-21
Gauges and Controls Assembly ........................ 22-23
Engine Assembly ............................................... 24-25
Air Intake Hose Assembly .................................. 26-27
Muffler Kit Assembly .......................................... 28-29
Engine Mounting Assembly ............................... 30-31
Engine Guard Assembly .................................... 32-33
Handle and Light Assembly ............................... 34-35
Light Connector/Dash Panel Assembly.............. 36-37
Pointer Assembly ............................................... 38-39
Rear Pointer and Foot Rest Assembly............... 40-41
Battery Assembly ............................................... 42-43
Drive Assembly .................................................. 44-45
Transaxle Mounting/Cam Lever Assy. ............... 46-47
4-Speed Bladeshaft (Gearbox) Assembly ......... 48-51
Shifter Assembly ................................................ 52-53
Gearbox Mounting Assembly............................. 54-55
Pulley and V-Belt Assembly................................ 56-57
Belt Guard Assembly ......................................... 58-59
Lift Pump Circuit Assembly ................................ 60-61
Water System Assembly .................................... 62-63
Terms and Conditions of Sale ................................. 94
PAGE 4 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
Order via Internet (Dealers Only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
■ View Parts Diagrams
■ Order Parts
■ Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
Order via Phone:
1-800-427-1244
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
❒
Dealer Account Number
❒
Specify Preferred Method of Shipment:
❒
❒
❒
❒
❒
Dealer Name and Address
✓ UPS/Fed Ex
✓ DHL
✓ Truck
■
■
Priority One
Ground
Shipping Address (if different than billing address)
Return Fax Number
■ Next Day
Second/Third Day
Applicable Model Number
■
Quantity, Part Number and Description of Each Part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
QTY. Column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
SAMPLE PARTS LIST
REMARKS Column
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. Column
Indicated by:
Unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
PAGE 6 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED SPARE PARTS
SP6457 CONCRETE SAW
1 to 5 Units
Qty...... P/N ......................... Description
1 ......... 345008.................... Coupler, Splined
1 ......... 446010.................... Valve, Cartridge
1 ......... 560028-5................. Switch Assembly
1 ......... 521004.................... V-Belt (16", 20" and 26" only)
1 ......... 521001.................... V-Belt (30" and 36" only)
1 ......... 521007.................... V-Belt All Models
2 ......... 520007.................... 5G 3VX 530 drive belt
1 ......... 300008.................... Primary Air Filter Element
1 ......... 300009.................... Safety Air Filter Element
1 ......... 306006.................... Transaxle Hydraulic Filter
2 ......... 500009.................... Wheel, Rear Axle
2 ......... 582038.................... Bushing, RearWheel
2 ......... 180003.................... Outer Flange
2 ......... 180004.................... Inner Flange
1 ......... 582012.................... Bushing, Flange
1 ......... 915316.................... Screw, HHC 5/8-11 x 3 LH Gr8
1 ......... 915315.................... Screw, HHC 5/8-11 x 3 RH Gr8
1 ......... 577009.................... Gasket, Drain Plug
1 ......... 306012.................... Engine Oil Filter, Deutz
1 ......... 304010.................... Engine Fuel Filter, Deutz
1 ......... 362002.................... Tube, B.G. Water Delivery R.H.
1 ......... 362003.................... Tube, B.G. Water Delivery L.H.
1 ......... 25643 ..................... Relief Check Valve
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE MOUNTING ASSY.
PAGE 8 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE MOUNTING ASSY.
DECK/GAUGE PANEL ASSY.
NO
1
2
3
4
5
6
7#
7#
8#
9
PART NO
25744
100048
16530
933243
3214
933244
EM963105
2549
PART NAME
QTY.
REMARKS
CONSOLE
1
1
2
2
4
4
3
3
3
FRAME PLATFORM
SCREW, HHC 7/16-14 X 1
WASHER, FLAT SAE 7/16 GRD 9 YZ
SCREW, HHC 1/2-13 X 1-1/4
WASHER, FLAT SAE 1/2 GRD 9 YZ
SCREW, HHC 1/2-13 X 2
SCREW, HHC 1/2-13 X 3
WASHER, FLAT SAE 1/2 GRD 9 YZ
933244
M18011
OPTIONAL WEIGHT KIT ............................................. 1.................... INCLUDES ITEMS W/#
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK/GAUGE PANEL ASSY.
DECK/GAUGE PANEL ASSY.
PAGE 10 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK/GAUGE PANEL ASSY.
DECK/GAUGE PANEL ASSY.
NO
1
2
PART NO
600151
600152
PART NAME
GAUGE PANEL
DECK PANEL
QTY.
1
1
REMARKS
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMEPLATE AND DECALS ASSY.
NAMEPLATE AND DECAL ASSY.
PAGE 12 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMEPLATE AND DECALS ASSY.
NAMEPLATE AND DECAL ASSY.
NO
1
2
PART NO
25250-001
606004
25782
PART NAME
QTY.
REMARKS
DECAL, WARNING, KEEP FEET CLEAR
DECAL, BLADE GUARD REMOVAL
DECAL, MQ DIAMOND LOGO
2
2
4
3
4
5
6
7
8
9
10
11
12
13
14
15
16
21302
25786
13118
35137
DECAL, WARNING, INSTALL BLADE GUARD ............ 1.............. REPLACES P/N 606004
DECAL, SP4 LOGO
2
1
1
1
1
1
2
1
1
1
1
1
DECAL, POWDER COATED
DECAL, WARNING, READ MANUAL
DECAL, NAMEPLATE
1997
M600002
22122-001
25249-001
23330-001
25491
20525
604001
25678
DECAL, DIESEL FUEL ONLY
DECAL, WARNING, SERIOUS INJURY
DECAL, WARNING, KEEP HANDS CLEAR
DECAL, CAUTION, DRIVE BELT
DECAL, ROTATION, CW
DECAL, WARNING, PROPOSITION 65
DECAL, WARNING, INSTALL BELT GUARD
DECAL, ROTATION, CCW
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESS PANEL ASSY.
ACCESS PANEL ASSY.
PAGE 14 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESS PANEL ASSY.
ACCESS PANEL ASSY.
NO
PART NO
102039
560020
12287
102039-1
577002
29057
10024
10930
29093
PART NAME
QTY.
REMARKS
1
PANEL ASSY., REAR CONSOLE, RED ........................ 1 ................. INCLUDES ITEMS W/
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
LATCH, REAR SAW ACCESS PANEL
SCREW, THP 1/4-20 X 3/4" SS
PANEL, REAR CONSOLE 6000, RED
WEATHER STRIP, REAR SAW ACCESS PANEL
DOCUMENT BOX, CP90007-07
NUT, NYLOCK 1/4-20
2
4
1
1.75 FT.
1
4
4
2
WASHER, FENDER, 1/4 X 1-1/4"
GASKET, TRIMLOCK X-109BT
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
F-N-R CONTROL AND HANDLE ASSY.
F-N-R CONTROL AND HANDLE ASSY.
PAGE 16 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
F-N-R CONTROL AND HANDLE ASSY.
F-N-R CONTROL AND HANDLE ASSY.
NO
1%
PART NO
560030
PART NAME
QTY.
REMARK
F-N-R CONTROL HANDLE ASSY. ....................... 1 ...................... INCLUDES ITEMS W/
*
2 %
560028-6
5600028-8
560028-4
560028-3
560028-5
560028-1
60118
SCREW, #6-32 X 3/8
WASHER, FLAT #4 NYLON
RUBBER BOOT
PLATE, SIDE SWITCH
SWITCH ASSEMBLY
HANDLE HOUSING
WIRE, F-N-R
5
5
2
1
2
1
1
1
1
*
3 %
*
4 %
*
5 %
*
6 %
*
7 %
*
8 %
*
9 %
925381
SCREW, SET 1/4-20 X 3/8
PLATE, FRONT SWITCH
*
10 % 560028-2
*
12
25627
405070
12223
405046
6904
580001
440006
120077
565006
915003
584044
2295
F-N-R CONTROL ASSY...................................... 1 ...................... INCLUDES ITEMS W/%
13%
14%
15%
16
SEAL, WEATHERPACK, RED
TERMINAL WEATHERPACK
CONNECTOR, TERMINAL, MALE
NUT, HEX FINISH 1/4-28 ZINC
ROD END, 1/4-20 FEMALE RH
CABLE, CONTROL 40" X 2" STROKE
MOUNT W/A TRANSAXLE CTRL. CABLE
SPRING, CTRL. CABLE TENSIONING
SCREW, HHC 1/4-20 X 3/4 GRD. 8
RETAINER, FNR CABLE SPRING
SCREW, HHC 1/4-20 X 7/8
4
4
4
4
2
1
1
1
1
1
1
1
1
1
1
17
18
19
20
21
22
23
24
440005
933240
TBD
PLATE, F-N-R PINTLE CONTROL
WASHER, FLAT SAE 1/4" GRD. 9
WASHER
25
26
27
TBD
NUT
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
JOYSTICK MOUNTING ASSY.
JOYSTICK MOUNTING ASSY.
PAGE 18 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
JOYSTICK MOUNTING ASSY.
JOYSTICK MOUNTING ASSY.
NO
PART NO
0161D
10019
1579
2203
PART NAME
NUT, HEX FINISH 5/16-18
NUT, FYLOC #10-32
SCREW. JJC 1/4-20 X .5
WASHER, FLAT, #10
CORD GRIP, SAW FNR CONTROL
BOOT, FNR CONTROL HANDLE
SPACER, F-N-R
BELLCRANK, SAW F-N-R
PLATE, NEUTRAL DETENT
F-N-R MOUNTING PLATE
CONTROL LEVER
QTY.
2
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
2
REMARK
1
*
2
*
3
*
4
*
5
405053
442005-6
442006-3
442011
442012
442013
442021
442022
460018
565005
584021
584023
584024
926348
933015
933073
933225
933240
933242
938062
973735
M13004
*
6
*
7
*
8
*
9
*
10
*
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
SPACER, F-N-R DELRIN
CAM ROLLER, SAW FNR CONTROL
EXTENSION SPRING F-N-R CONTROL
DENTENT BALL, SAW FNR CONTROL
PIN, LONG SPRING HANGER
PIN, SHORT SPRING HANGER
SCREW, SHOULDER 3/8-16 X 3/4
FRICTION DISC, SAW F-N-R
1/2 X 1-1/4 BELLEVILLE WASHER
WASHER, FENDER 1/2 X 1-1/2 ZINC
WASHER, FLAT 1/4 SAE
WASHER, FLAT 3/8 SAE
LOCKNUT 3/8-16YZ
SCREW, BHSC 10-24X1-SS
F-N-R MOUNTING ASSY. ..........................1................ INCLUDES ITEMS W/
4
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
FUELTANK ASSY.
FUEL TANK ASSY.
PAGE 20 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
FUELTANK ASSY.
FUEL TANK ASSY.
NO
PART NO
140004
29509
19633
368006
35009
19473
35007
37128
25553
PART NAME
QTY.
REMARK
1
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
FUEL TANK, 6000 & 6400 10 GAL
CAP, FUEL TANK 2.25 DIA, ONE WAY VALVE
BUSHING, RUBBER FUEL DAPCO 10672
FITTING, FUEL 90 DEG. #4 X #6 BARB
HOSE, 22.5" - 5/16" FUEL LINE
CLAMP, HOSE WORM # 2
1
1
2
1
1
4
1
1
HOSE, 26.5" - 1/4" FUEL LINE
VALVE, FUEL ON/OFF
FUEL TANK ASSY.......................................................... 1 ................. INCLUDES ITEMS W/
*
10
11
12
102043-1
933242
0166
PLATFORM W/A SAW FUEL TANK
WASHER, FLAT SAE 3/8" GRADE 9
SCREW, HHC 3/8-16" X 7/8"
1
5
5
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
GAUGES AND CONTROLS ASSY.
GAUGES AND CONTROLS ASSY.
PAGE 22 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
GAUGES AND CONTROLS ASSY.
GAUGES AND CONTROLS ASSY.
NO
1
2
PART NO
120222
25634
PART NAME
BRACKET, DUETZ THROTTLE CABLE
BULK HEAD ADAPTOR
QTY.
1
1
REMARK
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
25624
SWIVEL, CABLE END
1
1
1
2
1
1
6
1
1
1
1
1
4
1
1
2
448004-1
448004
M940653
15171
584028
933242
448006
926327
25634
SPACER, DEUTZ THROTTLE ACTUATOR ARM
ARM, DEUTZTHROTTLE ACTUATOR
SCREW, HHC M6-1.0 X 25MM GR10.9
CABLE, PULL (THROTTLE)
PIVOT END, CABLE
WASHER, FLAT SAE 3/8 GRD 9 YZ
CAM LEVER, CONCRETE SAW
SCREW, SHDLR 3/8D X 1/2L, 5/16-1,SCKT HD
BULK HEAD ADAPTOR
CABLE, PULL (DRIVE ENGAGE)
TACHOMETER, ELECTRIC 0-3000 RPM
GROMMET. 1/2" ID
INDICATOR, ENGINE
VOLTMETER
15171
421000
579072
406021
423000
406017-1
406017
406000
406020
KEY, IGNITION
IGNITION SWITCH W/KEYS
SWITCH, ROCKER, CH# M-58031-01 ...................... 2 ......... AUX AND LIGHTS
BLANK, ROCKER SWITCH COVER......................... 1 ......... AUX SWITCH NOT USED
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE ASSY.
ENGINE ASSY.
PAGE 24 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE ASSY.
ENGINE ASSY.
NO.
1
5
6
7
8
9
10
11
13
15
16
17
18
PART NO.
PART NAME
ENGINE, DEUTZ BF3L 2011 60HP TURBO DIESEL
FILTER, OIL, DEUTZ
QTY.
REMARKS
35396
306012
304010
267002
205007
367681
366030
35017
946703
933242
TBD
1
1
1
1
1
1
1
1
1
1
1
1
1
FILTER, FUEL, DEUTZ
FLYWHEEL, MODIFIED BF 3L 1011 FL
PLATE, HANDLEBAR STOP
FITTING, STR 8MJ-M18MO
FITTING, PLUG 8MJ
HOSE ASSY, 19.9” #8LP W/ 370677/370677
SCREW, HHC M8-1.25 X 25MM GR10.9
WASHER
DIPSTICK
OIL FILLER CAP
BLOWER JACKET 57HP DEUTZ TD 04179632
TBD
267009
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
AIR INTAKE HOSE ASSY.
AIR INTAKE HOSE ASSY.
PAGE 26 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
AIR INTAKE HOSE ASSY.
AIR INTAKE HOSE ASSY.
NO
1
2
3
4
5
6
7
8
PART NO
300010
300007-1
282003
29218
PART NAME
QTY.
REMARK
AIR CLEANER, DONALDSON, W/90 DEG. BEND ..................1..........INCLUDES ITEMS W/
*
BAND, DONALDSON AIR CLEANER
PREFILTER, ENGINE AIR 3"
CLAMP, HOSE WORM #48
AIR INTAKE HOSE ASM
HOSE, HUMP 3" x 2.75"
TUBING, AIR CLEANER SPLICE
TUBE, CRANCASE BREATHER, 57HP
INDICATOR, ELECTRICAL SERVICE 30" H2O/7.5KPa
FITTING, NIPPLE 1/8" MP
WASHER, FLAT SAE 5/16 GRD 9 YZ
SCREW, HHC 5/16-18 x 1-1/4
NUT, NYLOC 5/16-18
1
1
3
1
1
1
1
1
1
4
2
2
1
1
1
1
1
25625
302009
584036
302012
406018
65516
933241
2623
11
12
16
17
18
19
5283
300010-1
300009
300008
300010-2
15538
BODY, AIR FILTER
*
20
21
22
23
AIR FILTER, SAFETY ELEMENT
AIR FILTER, PRIMARY ELEMENT
CAP, AIR FILTER
*
*
*
CLAMP, HOSE WORM #6, 7/16-11/16
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
MUFFLER KIT ASSY.
MUFFLER KIT ASSY.
PAGE 28 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
MUFFLER KIT ASSY
MUFFLER KIT ASSY.
NO
1
2
3
4
5
6
PART NO
280002
285003
570005
106088
0300 B
280002
PART NAME
QTY.
REMARK
MUFFLER AND FLEX KIT ASSY.
EXHAUST, 12" EXTENSION
CLAMP, MUFFLER 2-1/2", 5/16" U-BOLT
BRACKET W/A, DEUTZ MUFFLER SUPPORT
WASHER, FLAT SAE 5/16
FLEX KIT
1
1
1
1
2
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE MOUNTING ASSY.
ENGINE MOUNTING ASSY.
PAGE 30 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE MOUNTING ASSY.
ENGINE MOUNTING ASSY.
NO.
1
PART NO.
120266
120267
120268
937188
913838
936216
120270
120271
120274
120273
938067
933247
915373
915218
933244
16521
PART NAME
QTY.
REMARKS
FRONT ENGINETRUNNION
REAR ENGINETRUNNION
RETAINER PLATE
1
1
1
2
1
1
1
1
2
3
4
NUT, LOCK NUT,NYLOC 5/8-11GRD8
SCREW, HHC 3/4-10X4 FT GR8
NUT, HEX JAM 3/4-10, ZINC
SUPPORT ARM, LH DEUTZ ENGINE
SUPPORT ARM, RH DEUTZ ENGINE
5
6
7
8
9
ENGINE MOUNT, RH REAR DEUTZ ENGINE, WA 1
10
11
12
13
14
15
16
17
18
19
20
21
ENGINE MOUNT, LH REAR DEUTZ ENGINE, WA
NUT, TOP LOCK 3/4-10 GR9YZ
WASHER, FLAT SAE 3/4 GRD 9 YZ
SCREW, HHC 3/4-10X5GRD 8
1
2
4
2
2
7
2
1
3
4
4
2
SCREW, HHC 1/2-13 X 3-3/4GRD8
WASHER, FLAT SAE 1/2 GRD 9 YZ
SCREW, HHC 1/2-13 X 4 GD8
SCREW, MODIFIED 1/2-13 X 1 3/4 GR5
SCREW, HHC 1/2-13 X 2 GR8YZ
SCREW, HHC M14-2.0X50MM GRD. 10.9
WASHER, FLAT SAE 9/16 GRD 9 YZ
NUT
25716
915211
940738
933245
TBD
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE GUARD ASSY.
ENGINE GUARD ASSY.
5
4
2
3
1
PAGE 32 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE GUARD ASSY.
ENGINE GUARD ASSY.
NO.
1
2
3
4
PART NO.
205011
3214
933244
TBD
PART NAME
QTY.
REMARKS
ENGINE GUARD, WA
SCREW, HHC 1/2-13 X 1 1/4
1/2 SAE FLAT WASHER YZ9
WASHER
1
1
1
2
2
5
TBD
HEX BOLT
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDLE AND LIGHT ASSY.
HANDLE AND LIGHT ASSY.
PAGE 34 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDLE AND LIGHT ASSY.
HANDLE AND LIGHT ASSY.
NO.
PART NO.
15503
102023-2
405001
TBD
PART NAME
KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1
TUBE, LIGHT BAR
CONNECTOR, PLUG, 4 PIN FEMALE
WASHER, LOCK
NUT
HANDLE BAR, CONCRETE SAW
KNOB W/A, HANDLEBAR
SCREW, SHC 8-32 X 1-1/4
CAM CLEAT
TERMINAL,FEM-SMALL 16-18 GA
CORD, LIGHT-EXTENDABLE
LIGHT ASSY.,RECTANGULAR COMP.
GRIP HANDLE BAR
QTY.
REMARKS
1
*
2
*
3
*
4
*
5
*
6
7
8
9
2
1
1
1
1
2
2
2
1
2
1
1
2
TBD
560023-1
560024
923199
574002
TBD
TBD
TBD
10
*
11
*
12
*
13
560017
TBD
14
LIGHT KIT ........................................................................ 1 .......... INCLUDES ITEMS W/
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
LIGHT CONNECTOR/DASH PANEL ASSY.
LIGHT CONNECTOR/DASH PANEL ASSY.
PAGE 36 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIGHT CONNECTOR/DASH PANEL ASSY.
LIGHT CONNECTOR/DASH PANEL ASSY.
NO.
1
2
3
4
PART NO.
933241
0655
104016
13287
923114
405000
TBD
PART NAME
WASHER, FLAT SAE 5/16 GRD 9 YZ
SCREW, HHC 5/16-18 X 3/4
COVER W/A, CONCRETE SAW DASH PANEL
NUT, NYLOC 8-32
SCREW, SHC 8-32 x 1/2
CONNECTOR, 4-WAY SOCKET CHROME
WIRE, BLACK #14
WIRE, BLACK #14
SEAL, WEATHERPACK 16-18 GA , GREEN
TERMINAL, WEATHERPACK MALE 14-16 GA
CONNECTOR, WEATHERPACK 2 PIN MALE
QTY.
REMARKS
7
7
1
2
2
1
5
6
*
8
TBD
TBD
*
9
TBD
*
10
12171
12179
12176
25865
2
2
1
*
11
*
12
*
13
HARNESS, LIGHT KIT .............................................. 1......... INCLUDES ITEMS W/
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
POINTER ASSY.
POINTER ASSY.
PAGE 38 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
POINTER ASSY.
POINTER ASSY.
NO.
2
PART NO.
PART NAME
QTY.
1
REMARKS
120239
120238
500005
5070 B
995366
582008
933241
0655
POINTER FRAME WA, RIGHT SIDE 6400
POINTER FRAME WA, LEFT SIDE 6400
6 X 1 POINTER WHEEL
3
1
4
1
5
NUT, NYLOC 3/4-10
2
6
SCREW, HHC 3/4-10X3-1/4YZ5
BUSHING, FLANGE,1 OD X 3/4 ID
WASHER, FLAT SAE 5/16 GRD 9 YZ
SCREW, HHC 5/16-18 X 3/4
2
7
4
8
2
9
2
10
11
12
13
14
15
16
17
18
19
20
15503
KNOB, COMFORT GRIP STAR, 3/8-16 X 1
POINTER, RIGHT FRONT 17 1/4 (6457)
POINTER, LEFT FRONT 12 1/4
AXLE, POINTER WHEEL
2
110044
110045
160004
933244
926006
20473
1
1
1
WASHER, FLAT SAE 1/2 GRD 9 YZ
SCREW, SQHS, CP 1/4-20 X 1/2
SCREW, HHC 3/8-16 X 3 FULL THREAD GR5
WASHER, FENDER, 1.5OD X 3/8ID
NUT, LOCK, NYLOC 3/8-16 GRD 8
POINTER ROPE ASSY
2
2
1
3233
2
937185
574003
1456
1
1
NUT, HEX FINISH 3/8-16
3
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR POINTER AND FOOT REST ASSY.
REAR POINTER AND FOOT REST ASSY.
PAGE 40 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR POINTER AND FOOT REST ASSY.
REAR POINTER AND FOOT REST ASSY.
NO.
1
2
3
4
PART NO.
560029
933241
0202
110020
0205
PART NAME
QTY.
REMARKS
FOOT REST
1
2
2
1
1
WASHER, FLAT 5/16" YZ9
SCREW, HHC 5/16"-18 X 1 ZINC
REAR POINTER
5
HCS, 3/8-16 X1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY ASSY.
BATTERY ASSY.
PAGE 42 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY ASSY.
BATTERY ASSY
NO. PART NO. PART NAME
QTY.
1
REMARKS
1
120265
12832
575001
1665
10133
125051
915109
933242
206011
10136
PLATFORM, CONCRETE SAW BATTERY, WA
SNUBBINGWASHER
2
4
3
RUBBER MOUNT ASSY
4
4
SCREW, HHC 3/8-16 X 2
NUT, NYLOC 3/8-16
BATTERY RETAINER CLIP W/A 6057 & 6457
SCREW, HHC 3/8-16X1-1/2 GR8YZ
WASHER, FLAT SAE 3/8 GRD 9 YZ
BATTERY RUBBER PAD
4
5
6
6
1
7
1
8
1
9
2
10
11
12
13
14
15
16
17
18
19
20
WASHER, FLAT SAE 3/8
BATTERY
8
404006
35037
1
CABLE ASSY, BATTERY POS (+) TO STARTER (+)
CABLE ASSY, ENGINE GROUND
CABLE ASSY, BATT. TO LIFT PUMP SOLENOID
CABLE ASSY, LIFT PUMP SOL. TO LIFT PUMP POS (+)
CABLE ASSY, BATTERY TO LIFT PUMP NEG (-)
TERMINAL, POSITIVE BATTERY, MARINE
TERMINAL, NEGATIVE BATTERY, MARINE
SCREW, HHC 3/8-16 X 1/2 GRD8
SCREW, HHC M10-1.5 X 20 MM
1
35032
1
35033
1
35036
1
35035
1
405060
405061
915101
940692
1
1
2
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 43
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE ASSY.
DRIVE ASSY.
PAGE 44 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE ASSY.
NO. PART NO. PART NAME
QTY.
REMARKS
1
2
3
4
5
6
7
263003
TRANSAXLE
1
8
9
2
1
1
06501-028 SCREW, HHC 3/8-16 X 3-1/2 RCC130H
933242
120078
125040
25623
3/8 SAE FLAT WASHER YZ9
BACKING PLATE, TRANSAXLE
ALIGNMENT ADJ BRACKET
CIRCLIP, RETAINER
540033
PULLEY, A SECTION
4.125 X 18 TOOTH SPLINE
STAND-OFF 7/8 HEX
WHEEL, 12X3X2 NEOPRENE TREAD
BUSHING, 1" TRANSTORQUE KEYLESS 2
6-1/2" 5 BLADE FAN
1
1
2
8
583064
35326
582038
384001
933201
TBD
923118
968011
933244
25966
25971
25956
25973
25955
25964
25964
25976
25718
367470
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
1
1
1
1
1
2
3/16 FENDER WASHER
8 SAE FLAT WASHER
SCREW, SHC 8-32X1 NP
NUT, HEX FINISH 1/2-13
WASHER, FLAT SAE 3/8 GRD 9 YZ
HOSE, 61" #6 LP ........................................ 1 ....... TRANSAXLE (REAR) TO BLADESHAFT (TOP)
HOSE, 24.2" #4 HP ..................................... 1 ....... TRANSAXLE (TOP) TO WATER FLOW (RIGHT)
HOSE, 8" #8 LP........................................... 1 ....... TRANSAXLE (TOP) TO TRANS. FILTER (BOTTOM)
HOSE, 65.7" #4 HP ..................................... 1 ....... TRANSAXLE (TOP) TO BLADESHAFT (REAR)
HOSE, 17" #8 LP ........................................ 1 ....... TRANS. FILTER (TOP) TO OIL COOLER (RIGHT)
HOSE, 73.9" #6 LP ..................................... 1 ....... BLADESHAFT (TOP) TO OIL RESERVOIR (BOTTOM)
HYDRAULIC HOSE .................................... 1 ....... BLADESHAFT (TOP) TO OIL RESERVOIR (REAR)
HOSE, 18.5" 1/2 ID PUSHLOCK 250 PSI .. 1 ....... TRANSAXLE (FRONT) TO TRANSAXLE (FRONT)
FITTING, ORIFICE 4MJ-6MO X .020
FITTING, STR 4MJ - 6MO
HOSE, 78.4" #8 LP
1
1
28 25957
1 ....... OIL COOLER (RIGHT) TO BLADESHAFT (REAR)
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 45
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSAXLE MOUNTING/CAM LEVER ASSY.
TRANSAXLE MOUNTING/CAM LEVER ASSY.
PAGE 46 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSAXLE MOUNTING/CAM LEVER ASSY.
TRANSAXLE MOUNTING/CAM LEVER ASSY.
NO.
1
PART NO.
06501-028
933242
120078
125040
933244
968011
448007
584028
926327
5283
PART NAME
QTY.
8
REMARKS
SCREW, HHC 3/8-16 X 3-1/2 RCC130H
WASHER, FLAT SAE 3/8 GRD 9 YZ
TRANSAXLE BACKING PLATE ASSY, WA
ALIGNMENT ADJUSTING BRACKET, WA
WASHER, FLAT SAE 1/2 GRD 9 YZ
NUT, HEX FINISH 1/2-13
2
13
2
3
4
1
5
2
6
2
7
CAM LEVER
SWIVEL, CABLE
3/8 X 1/2 SHOULDER BOLT
NUT, NYLOC 5/16-18
PIN, COTTER 1/16X1/2 PLTD
SCREW, SHC 8-32X3/8 GRD 8
WASHER
1
8
1
9
1
10
11
12
13
1
965012
923113
TBD
1
1
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 47
Download from Www.Somanuals.com. All Manuals Search And Download.
4-SPEED BLADESHAFT (GEARBOX) ASSY.
GEARBOX ASSY.
PAGE 48 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
4-SPEED BLADESHAFT (GEARBOX) ASSY.
GEARBOX ASSY.
NO.
PART NO. PART NAME
QTY.
1
REMARKS
1
220100-1
960857
960855
220100-3
923202
2460
923201
220100-4
923203
924200
584019
25666
HOUSING, MAIN CASE
THREADED INSERT 3/8-16 X 9/16-12
THREADED INSERT 5/16-18 X 1/2-13
FRONT ACCESS COVER
1/4-20 X 5/8 SHCS
*
2
3
1
*
13
1
*
4
5
*
9
*
6
7
SCREW, 1/4-20 X 1/2" FHSC
1/4-20 X 1/2 SHCS
2
*
1
*
8
9
COVER PLATE
1
*
1/4-20 X 3/4 SHCS
13
2
*
10
10-24 X 5/8 FHSCS
*
11
SIGHT GLASS
O-RING
1
*
12
*
2
13
*
584030
368697
202000
915101
933242
926942
421001
25695
306013
368657
578011
583026
577009
ANTI-ROTATING BOLT
4-7/16-20 SAE-HHP
8
14
8
*
15
BLADESHAFT SKID PLATE
3X8-16 X 1/2 HCS YZ8
3/8 SAE FLAT WASHER YZ9
DOWEL PIN 3/8 X 3/4
TACH SIGNAL GENERATOR
WASHER, SEALED 3/4"
FILTER, HIGH PRESSURE INLINE
FITTING, PLUG 12MO
O-RING
1
*
16
*
4
17
*
4
18
3
*
19
1
*
20
*
1
21
*
1
23
1
*
24
1
*
25
*
1/2-20 MAGNETIC DRAIN PLUG
DRAIN PLUG GASKET
1
26
*
1
29
367015-013 1/16 HH PLUG .013 ORIFICE
11749
11722
220100-5
2203
6
*
30
FITTING, STR 8MJ-8MO
FITTING, 90 6MJ-6MO
HOUSING, END COVER
WASHER, FLAT, #10
SCREW, BHSCS 10-24 X 3/8
5/16-18 X 1-3/4 SHCS
5/16-18 X 2-3/4 SHCS
SEAL
7/16-14THREADED INSERT
BLADESHAFT, 6400 SERIES 4 SPEED
SNAP RING
WOODRUFF KEY #807
KEY 3/8 X 1.375
GEAR SPACER
1
*
31
*
3
32
*
1
34
3
*
35
924029
923260
923264
480005
960157
162004
576011
241003
969340
583019
583069
578135
485003
480007
480006
576006
10138
3
*
38
*
5
39
*
4
41
1
*
42
2
*
43
*
1
44
*
1
45
2
*
46
1
*
47
*
1
48
*
SPACER, BEARNG 6400 SERIES 4 SPEED
O- RING
1
49
50
2
*
SEAL SLEEVE
2
*
51
*
SEAL CR 19599
2
52
*
SEAL
2
53
1/4-20 X 1/2 SET SCREW
EXTERNAL SNAP RING
THRUSTWASHER
2
*
54
6
*
55
*
486001
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 49
Download from Www.Somanuals.com. All Manuals Search And Download.
4-SPEED BLADESHAFT (GEARBOX) ASSY.
GEARBOX ASSY. (CONTINUED)
PAGE 50 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
4-SPEED BLADESHAFT (GEARBOX) ASSY.
GEARBOX ASSY. (CONTINUED)
NO.
PART NO. PART NAME
QTY.
13
1
1
2
REMARKS
56
923255
25693
SCREW SHC 5-16 X 18 X 1
*
57
*
HOUSING, LONG SIDE, 6400 SERIES
HOUSING, SHORT SIDE, 6400 SERIES
COLLAR, INNER BLADE SHAFT
58
*
168006
180004
180003
926790
582012
915316
915315
241001
241001-1
241003
241000
241002
241001-2
460014
460011
460004
460015
576009
576008
180003-1
25694
59
*
60
COLLAR ASSY, OUTER BLADE SHAFT...................2.......... INCLUDES ITEMS W/#
*
61#
PIN, DOWEL 3/8 X 1-3/4
BUSHING, QUICK DISCONNECT
SCREW, HHC 5/8-11X3 LH GR8
SCREW, HHC 5/8-11X3 GR8
SLIDER GEAR
2
2
1
1
1
1
1
1
1
1
3
3
2
2
3
3
1
*
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
SLIDER SHAFT
OUTPUT GEAR
INPUT GEAR
MAIN SHAFT
BOLT, SLIDER
BEARING 22207-RHR
BEARING
BEARING
BEARING
EXTERNAL SNAP RING
INTERNAL SNAP RING
COLLAR, OUTER BLADE SHAFT
77#
78
*
4-SPEED BLADESHAFT (GEARBOX) ASSY............. 1......... INCLUDES ITEMS W/
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 51
Download from Www.Somanuals.com. All Manuals Search And Download.
SHIFTER ASSY.
SHIFTER ASSY.
PAGE 52 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
SHIFTER ASSY.
SHIFTER ASSY.
NO.
1
PART NO. PART NAME
QTY.
REMARKS
220100-2
25705
SHIFT COVER HOUSING .................... 1 ............. S/N 1-84
1
SHIFT COVER HOUSING .................... 1 ............. S/N 85 AND ABOVE
DOWEL PIN 1/4 X 3/4.......................... 2 ............. S/N 1-84 ONLY
3
926919
584018-1
584018-2
565001
578014
578010
974312
584017
925584
241004-1
560022
565000
565000
583035
576010
480004
241005-2
35341
241005-1
35342
964053
35353
924254
923212
915103
933242
4
DETENT BODY
1
1
1
1
2
1
1
1
1
1
5
DETENT PLUNGER
PLUNGER SPRING
O-RING AS-014
O-RING
PIN, SPRING 0.125 X 1.5
BALL PLUNGER
SET SCREW .375 X 0.625
SHIFT PINION
PINION SHIFT HANDLE
WAVE DISC SPRING........................... 1 ............. S/N 1-84
WAVE DISC SPRING........................... 2 ............. S/N 85 AND ABOVE
SHIFTER SPACER
SNAP RING 2.0 X 0.0693
SEAL
SHIFT FORK ........................................ 1 ............. S/N 1-84
SHIFT FORK ........................................ 1 ............. S/N 85 AND ABOVE
SHIFT ROD .......................................... 1 ............. S/N 1-84
SHIFT ROD .......................................... 1 ............. S/N 85 AND ABOVE
SPRING PIN 3/32 X 3/8 ....................... 1 ............. S/N 1-84
SPRING PIN 1/8 X 3/8 ......................... 1 ............. S/N 85 AND ABOVE
SCREW, FHSCS 5/16-18 X 3/4 ............ 1 ............. S/N 1-84 ONLY
SCREW, SHCS 1/4-20 X 2-1/4
6
7
8
9
10
11
12
13
14
14
15
16
17
18
18
19
19
20
20
21
22
23
24
1
1
1
3
SCREW, HCS 3 X 8-16 X 3/4............... 1 .............S/N 85 AND ABOVE ONLY
WASHER, 3/8 SAE FLAT WASHER ..... 1 .............S/N 85 AND ABOVE ONLY
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 53
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX MOUNTING ASSY.
GEARBOX MOUNTING ASSY.
PAGE 54 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX MOUNTING ASSY.
GEARBOX MOUNTING ASSY.
NO
1
2
PART NO
06502012
933243
16530
PART NAME
QTY.
REMARK
SCREW, HHC 7/16- 14 X 1- 1/2
7/16 SAEFLAT WASHER YZ9
SCREW, HHC 7/16-14 X 1
1
3
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1023
100022
25757
583095
120225
923357
120226
540043
460016
TBD
SCREW, HHC 3/8-16 X 1 1/4 GR 5
REMOVABLE FRONT SECTION, WA
FRONT PLATE- POINTER MOUNT, WA
GEARBOX MOUNT SPACER
GEARBOX MOUNTING BLOCK ASSY.
SCREW, SHC 7/16-14 X 1-1/4,NP
GEARBOX MOUNTING BLOCK W/PIN, ASSY.
PULLEY, 6.0 10G 3V
BUSHING, 17/8- 2517 SERIES TAPER LOCK
PLATE
GEARBOX SUPPORT PLATE WASHER
GEARBOX SUPPORT, RIGHT SIDE
6
1
1
2
1
4
1
1
1
TBD
1
583094
125053
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 55
Download from Www.Somanuals.com. All Manuals Search And Download.
PULLEY AND V-BELT ASSY.
PULLEY AND V-BELT ASSY.
PAGE 56 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
PULLEY AND V-BELT ASSY.
PULLEY AND V-BELT ASSY.
NO PART NO PART NAME
QTY.
REMARKS
2
3
4
5
6
7
8
9
544005
938422
544006
120232
448000
540003
25716
FLANGE, SPLINED DRIVE
1
8
1
1
1
1
1
2
2
1
8
1
3
1
1
2
1
2
1
1
8
1
4
3
4
2
2
1
1
1
1
1
1
2
1
1
1
8
8
SCREW, HHC M10-1.0 X 50MM 10.9 NP
SHAFT, SPLINED DRIVE
BELT TENSIONER MOUNT
TENSIONER IDLER ARM RT2001
4 INCH A SECTION SHEAVE
SCREW, MODIFIED 1/2-13 X 1-3/4 GR5
WASHER, 3/8 FLAT SAE P YZ
SCREW, HHC 3/8-16 X 3/4 GR8YZ
SHOULDER ADAPTER SB0005
SCREW, HHC 1/4-20 X 3/4 GRD 8
933242
10 915103
11 544001
12 915003
13 261002-1 ADAPTOR PLATE
SCREW, FHSC 10-1.5 X 25 MM NP
14 939978
15 544007
16 576015
17 460024
18 583088
20 520009
21 576014
22 544008
23 923203
24 544004
25 924200
26 540030
27 925437
28 576003
29 460021
30 120281
31 960102
32 167004
34 10307
35 933244
36 10176
37 584029
38 521006
39 521013
40 540056
41 940694
42 933242
BEARING SUPPORT
SNAP RING, INTERNAL
BEARING
SPACER, BEARING 10 MM
V-BELT, 3VX 450 5 G POWERBAND
SNAP RING, EXTERNAL
SPLINED DRIVEN FLANGE
SCREW, SHC 1/4-20 X 3/4
PTO CAP
SCREW, FHSC 10-24 X 5/8 NP
PULLEY, A SECTION 4.125 X 3/4"
SCREW, SHS, CP 5/16-18 X 3/8
SNAP RING
BEARING, ROLLER 6204-2RS
JACKSHAFT PIVOT ARM, W/A
FITTING, GREASE ZERK 1/8 MP
JACKSHAFT
SCREW, HHC 1/2-13 X 5
WASHER, FLAT SAE 1/2 9 YZ
NUT, NYLOC 1/2-13
KEY, 3/16
BELT, AX 35
BELT, AX 37
PULLEY, 5.1 10G 3V X 4.0 1A
SCREW, HHC M10-1.5X30MM FT 10.9 NP
WASHER, FLAT SAE 3/8 GRD 9 YZ
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 57
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT GUARD
BELT GUARD
7
3
1
4
2
3
6
5
PAGE 58 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT GUARD
BELT GUARD
NO.
1
2
3
4
5
6
7
PART NO.
PART NAME
QTY.
REMARKS
25756
BELT GUARD, WA
1
5
8
1
2
2
3
915051
933241
204021-1
915105
933242
0655
5/16-18 X 1/2 HCSYZ8
5/16 SAE FLAT WASHER YZ9
BELT ADJUSTMENT ACCESS COVER
3/8-16 X 1 HCS YZ8
3/8 FLAT WASHER YZ9
SCREW, HHC 5/16-18 X 3/4
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 59
Download from Www.Somanuals.com. All Manuals Search And Download.
LIFT PUMP CIRCUIT ASSY.
LIFT PUMP CIRCUIT ASSY.
PAGE 60 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIFT PUMP CIRCUIT ASSY.
LIFT PUMP CIRCUIT ASSY.
NO
1
2
3
4
5
6
7
8
PART NO
340009
933241
4683
06500-007
447009
480003
2621
368817
444008
446029
446010
21095
169006
25968
25967
25970
5277
570050
366690
25628
12171
12179
PART NAME
QTY.
1
4
2
2
1
4
2
2
1
2
2
5
2
2
1
1
4
2
1
1
6
6
2
2
REMARK
LIFT PUMP ASSY
5/16 SAE FLAT WASHER GRD 9 YZ
SCREW, HHC 5/16-18 X 5/8
SCREW, HHC 5/16-18 X 7/8
LIFT CYLINDER
SEAL, OIL CR-9815
FITTING, GREASE ZERK STR 1/4-28
FITTING, 90 4MJ-4MO
MANIFOLD, 3 SPEED RAISE-LOWER
COIL, 12VDC-CARTRIDGE VALVE
CARTRIDGE VALVE
FITTING, STR 4MJ-4MO
PIN, CYLINDER
HOSE, 16.7" #4 HP
HOSE, 58.6" #4 HP
9
10
11
12
13
14
16
17
18
19
20
21
22
23
24
25
26
HOSE, 21.2" #4 HP
HHC 1/4-20 X 1-1/2
*
CLAMP ASSY, #4 SINGLE HOSE
FITTING, TEE RUN 4MJ-4MJ-4FJ
SOLENOID, LIFT PUMP
SEAL, WEATHERPACK 16-18 GA GREEN
TERMINAL, WEATHERPACK MALE 14-16 GA
CONNECTOR, WEATHERPACK MALE
SCREW, SHC 12-24 X 3/4
WASHER, FLAT #10
INCLUDES ITEMS W/
*
405066
923186
2203
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 61
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER SYSTEM ASSY.
WATER SYSTEM ASSY.
PAGE 62 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER SYSTEM ASSY.
WATER SYSTEM ASSY.
NO PART NO PART NAME
QTY.
REMARKS
1
2
3
4
5
6
7
8
9
446004
923143
26496
25827
25828
25960
382001
25931
25962
VALVE, BALL, 1/2 BRASS
2
4
1
1
1
SCREW, SHC 10-24 x 3/8"
FITTING, 90 1/2MP- 1/2FP
FITTING, BRASS (F) 3/4 GHT SWIVEL 1/2 MNPT
GASKET, GARDEN HOSE SWIVEL
HOSE, 7.5", #8 LP .................................................... 1.........WATER HOSE TO OIL COOLER
OIL COOLER
FITTING, 90 8BARB-1/2 MP (4390-8-8)
HOSE, 19.5", #8 LP .................................................. 1.........OIL COOLER TO WATER ON/OFF
HOSE, 17.2", #8 LP .................................................. 1.........WATER ON/OFF TO WATER FLOW
HOSE, 127.8", #8 LP................................................. 1.........WATER FLOWTO BLADEGUARD
1
4
10 25961
11 25963
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 63
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADEGUARD (16-36") ASSY.
BLADEGUARD (16-36") ASSY.
11
3
18
1
12
7
8
13
14
9
5
W
ARNING!
17
KEEP
HANDS
CLEAR
W
h
In
e
CAUTIO
is
B
n
ta
h
L
a
s
C
rg
e
e
e
15
lle
r
B
e
S
d
e
e
la
d
e
D
N
,
a
w
B
d
rs
e
n
g
n
O
lt
a
n
d
F
A
to riv
ILURE
JADV
G
U
P
e
u
ro
u
M
M
a
T
.
TO
EEE
p
rd
a
e
COMPL
n
S
r
S
AV
a
l.
iz
e
S.M.I.
SA
W
EEA
Y
W
6
OIEJIGTHGVCBVVZ
THE
MASO
MANUF
C
Y
C
ACTUARNEDR
AH
CONCRE
’S
INSTITUTE
R
O
T
T
I
O
N
W
ARNING!
2
11
KEEP
FEET
CLEAR
13
12
16
4
19
15
10
PAGE 64 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE GUARD (16-36") ASSY.
BLADEGUARD (16-36") ASSY.
NO.
1
PART NO.
200003
200008
200009
200011
PART NAME
QTY.
REMARKS
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 16"
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 20"
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 26"
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 30"
1
1
1
1
200013SP- BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 36"
2
200004
200008
200010
200012
200014
582040
582039
362002
362003
445002
445003
370456
320010
2113
200019
576006
923144
1618
10176
10024
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 16"
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 20"
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 26"
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 30"
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 36"
BUSHING, BLADEGUARD HINGE, DELRIN....................... 1 ............... 16", 20", 26"
BUSHING, BLADEGUARD HINGE, DELRIN....................... 1 ............... 30", 36"
2
2
2
2
3
3
4
RIGHT SIDE WATERING TUBE
LEFT SIDE WATERING TUBE
MANIFOLD, WATER, SMALL .............................................. 1 ............... 16", 20", 26"
MANIFOLD, WATER, LARGE .............................................. 1 ............... 30", 36"
FITTING, BRASS 6BARB-1/4MP
FITTING,QD MALE SNAPTITE PHN4,1/4MP
FITTING, PLUG 1/8MP HEX SKT HD
FLAP, MUD
HOSE, WATER #6LP
SCREW, SHC 10-24 X 1/2
NUT, NYLOC 10-24
NUT, NYLOC 1/2- 13
NUT, NYLOC 1/4- 20
1
1
5
6
6
7
2
2
1
1
2
4
1
1
3
1
2
8
9
10
11
12
13
14
15
16
17
18
18
19
0131 A
26250
06503-026
06503-030
10930
SCREW, HHC 1/4- 20 X 3/4
SCREW, HHC 1/4- 20 X 1 3/4
SCREW, HHC 1/2-13 X 3-1/4 .............................................. 1 ............... 16", 20", 26"
SCREW, HHC 1/2-13 X 3-3/4 .............................................. 1 ............... 30", 36"
WASHER, FENDER, 1/4 X 1-1/4
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 65
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADEGUARD (42") ASSY.
BLADEGUARD (42") ASSY.
11
5
10
A
17
3
6
A
W
ARNING!
13
1
14
K
EE
P
W
is
Be
hen
InstaLllaerdg,er
H
CAUTION
A
16
16
C
4
ND
LE
S
A
Changed
R
See
Blade
Belt
Owners
F
A
and
D
ILURE
to
M
JADV
rive
Proper Guard
T
M
O
EEE
COMPLanual.
UST
Size.
A
V
S.M.I.
SA
W
EEA
Y
W
OIEJGGVCBVVZ
ITH
MASO
MANUF
THE
C
Y
ACTURER’S
AND
C
AH
CONCRET
INSTITUTE
W
ARNING!
11
5
K
E
E
P
15
F
C
E
L
E
E
T
A
R
A
15
18
7
12
2
9
17
PAGE 66 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADEGUARD (42") ASSY.
BLADEGUARD (42") ASSY.
NO.
1
PART NO.
200021
200022
582039
445003
370456
320010
362003
362002
200019
584039
362009
0131 A
26250
PART NAME
QTY.
1
REMARKS
BLADEGUARD, FRONT HALF
BLADEGUARD, REAR HALF
BUSHING, BLADEGUARD HINGE, DELRIN
MANIFOLD, WATER, LARGE
FITTING, BRASS 6BARB-1/4MP
FITTING, QD MALE SNAPTITE PHN4 1/4MP
LEFT SIDE WATERING TUBE
RIGHT SIDE WATERING TUBE
FLAP, MUD, BLADEGUARD
PIN, HINGE 4-1/2 W/RETAINING WIRE
HOSE, WATER # 6LP
2
1
3
1
4
1
5
2
6
1
7
1
8
1
9
1
10
11
12
13
14
15
16
17
18
1
2
SCREW, HHC 1/4-20 X 3/4
1
SCREW, HHC 1/4-20 X 1 3/4
FITTING, PLUG 1/8MP HEX SKT HD
NUT, NYLOC 1/4-20
2
2113
1
10024
1618
923144
10930
3
NUT, NYLOC 10-24
4
SCREW, SHC 10-24 X 1/2
4
WASHER, FENDER, 1/4 X 1-1/4
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 67
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADEGUARD (48") ASSY.
BLADEGUARD (48") ASSY.
11
10
8
13
4
6
3
5
12
W
ARNING!
14
16
KEEP
HANDS
CLEAR
When
CAUTION
is
Be
See
InstaLllaerdg,er
Changed
Blade
Belt
Owners
FA
and
Drive
to
Proper Guard
I
L
J
U
A
R
D
E
V
TO
Manual.
MUST
Size.
E
E
C
O
E
AV
M
E
P
A
S
S
E
L
Y
.M
W
E
.
W
I
.
A
O
M
IT
G
I
A
H
G
M
S
J
T
V
O
A
H
N
N
E
B
R
U
C
C
Y
A
F
A
C
Z
V
C
N
A
H
V
T
D
U
C
R
O
E
R
N
I
’S
C
R
E
N
T
S
E
T
IT
U
T
E
1
16
W
ARNING!
7
K
E
E
P
F
C
E
L
E
E
T
A
R
17
15
12
18
9
2
PAGE 68 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADEGUARD (48") ASSY.
BLADEGUARD (48") ASSY.
NO.
1
PART NO.
200046
200047
582039
445003
370456
320010
362003
362002
200019
584039
362010
0131 A
26250
PART NAME
QTY.
1
REMARKS
BLADEGUARD W/A, FRONT HALF
BLADEGUARD W/A, REAR HALF
BUSHING, BLADEGUARD HINGE, DELRIN
MANIFOLD, WATER, LARGE
FITTING, BRASS 6BARB-1/4MP
FITTING, QD MALE SNAPTITE PHN4 1/4MP
LEFT SIDE WATERING TUBE
RIGHT SIDE WATERING TUBE
FLAP, MUD, BLADEGUARD
PIN, HINGE 4-1/2 W/RETAINING WIRE
HOSE, WATER # 6LP
2
1
3
1
7
1
8
2
4
1
9
1
10
11
6
1
1
1
5
2
16
15
17
13
12
18
14
SCREW, HHC 1/4-20 X 3/4
1
SCREW, HHC 1/4-20 X 1 3/4
FITTING, PLUG 1/8MP HEX SKT HD
NUT, NYLOC 1/4-20
2
2113
1
10024
1618
923144
10930
3
NUT, NYLOC 10-24
SCREW, SHC 10-24 X 1/2
WASHER, FENDER, 1/4 X 1-1/4
4
4
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 69
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADEGUARD MOUNT/WIPER ASSY.
BLADEGUARD MOUNT/WIPER ASSY.
PAGE 70 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADEGUARD MOUNT/WIPER ASSY.
BLADEGUARD MOUNT/WIPER ASSY
NO.
2
PART NO.
M200000
100019
206006
202
PART NAME
QTY.
REMARKS
FLANGE GAURD, WA
1
2
2
8
8
1
1
1
1
6
3
BACKING STRIP
4
SLURRY GUARD FLAP
SCREW, HHC 5/16-18 X 1 ZINC
NUT, NYLOC 5/16-18
5
6
5283
7
120090
120092
120091
120093
924288
LEFT BLADEGAURD MOUNT CLIP
RIGHT BLADEGAURD MOUNT CLIP
LEFT BLADE CLIP SPACER
RIGHT BLADE CLIP SPACER
3/8-16 X 1-1/2 SHCS
8
9
10
11
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 71
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH STOP METER/CABLE ASSY.
DEPTH STOP METER/CABLE ASSY.
PAGE 72 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH STOP METER/CABLE ASSY.
DEPTH STOP METER/CABLE ASSY.
NO
1
PART NO
25538
PART NAME
QTY. REMARKS
DEPTH METER ASSY. ...................................................... 1 ...... INCLUDES ITEMS W/
*
2
560025
584025
110031
583059
460019
973752
1618
125039
540011
926149
933240
10024
KNOB, SAW DEPTH INDICATOR
STUD, 1/4-20X1 3/4" B7 NO PLATE
POINTER, CONCRETE SAW DEPTH
SHIM, 0.375 OD x 0.251 ID x 0.020 THICK
FLANGE BEARING, 0.25 ID X 0.75 OD
SCREW, BHSC,1/4-20 x 5/8 SS
NUT, NYLOC 10-24
U-BRACKET W/A, SAW DEPTH INDICATOR
PULLEY, CABLE 1.25 OD
SCREW, SHDLR 1/4D X 5/16L ,10-24,SCKT HD
WASHER, FLAT SAE 1/4 GRD 9 YZ
NUT, NYLOC 1/4-20
SCREW, SHC 1/4-20 x 1/2
SCREW, HHC 1/4-20 X 3/4
SCREW, HHC 1/4-20 x .5
NUT, HEX FINISH 1/4-20
TAB W/A, DEPTH INDICATOR
SCREW, SHC 8-32 x 3/4
AXLE, INDICATOR SHEAVE
NUT, NYLOC 8-32
CABLE, DEPTH INDICATOR
SPRING, EXTENSION, DEPTH INDICATOR
1
1
1
5
1
1
3
1
8
6
4
1
1
1
1
1
1
3
2
3
1
1
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
10
*
11
12
13
14
*
*
*
*
923201
0131 A
1579
15%
16%
17%
18%
19%
20%
21%
22%
23%
24
949
120243
923116
160013
13287
440012
565004
25538
DEPTH METER CABLE ASSY........................................... 1 ...... INCLUDES ITEMS W/%
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 73
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH STOP CYLINDER/VALVE ASSY.
DEPTH STOP CYLINDER/VALVE ASSY.
PAGE 74 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH STOP CYLINDER/VALVE ASSY.
DEPTH STOP CYLINDER/VALVE ASSY.
NO.
1
PART NO.
446024
446024-1
368817
447008
480003
25675
PART NAME
QTY.
REMARKS
VALVE, DEPTH STOP FLOW CONTROL ............ 1 ........... INCLUDES ITEMS W/*
2*
3
PANEL MOUNT KIT, VALVE
FITTING, 90 4MJ-4MO
DEPTH STOP CYLINDER
SEAL, OIL CR-9815
FITTING, BRASS BREATHER VENT 1/4" NPT
FITTING, BLEEDER VALVE
FITTING, STR 4MJ-4MO
PIN, COTTER 1/8 X 1-3/4
PIN, CLEVIS 3/4 X 2
DEPTH STOP CYLINDER PIN
DEPTH STOP CYLINDER SPACER
5/16-24 X 5/8" SQUARE HEAD SET SCREW
FITTING, ORIFICE 4MJ-6MO X .020
HOSE ASSY, 24.2" #4 HP
1
2
1
2
1
1
1
1
1
1
1
1
1
1
4
5
6
7
25632
8
21095
9
965079
966166
169004
583061
926064
25718
10
11
12
13
14
16
25971
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 75
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT AXLE ASSY.
FRONT AXLE ASSY.
PAGE 76 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT AXLE ASSY.
FRONT AXLE ASSY.
NO.
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
19
20
21
22
23
PART NO.
4702
583096
960105
912311
25599
485002
915001
508005
06505008
933246
576003
460002
500006
35107
PART NAME
QTY.
8
2
1
2
2
2
6
2
2
11
2
8
2
1
2
2
2
REMARKS
NUT, HEX FINISH 5/8-11
BEARING BACKING PLATE
1/4-28 GREASE ZERK
5/8-11 X 2 HCS
BEARING, FRONT AXLE PIVOT
SEAL
1/4-20 X 1/2 HCS YZ8
8 X 3WHEEL COVER
5/8-11 X 1 HCS YZ8
5/8 SAE FLAT WASHERYZ9
SNAP RING, HO-185
BEARING
8 X 3 WHEEL
FRONT AXLE 6457-48", WA
SCREW, SQHS,CP 5/16-24 X 5/8
NUT, HEX FINISH 1/2-13
SCREW, HHC 1/2-13 X 2 FULL THREAD
SCREW, 5/8-11 X 1-1/2 HCS YZ8
5/8-11 X 2 HCS YZ8
926064
968011
19400
21376
915311
4
2
2
915309
SCREW, 5/8-11 X 1-1/2 HCS YZ8
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 77
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE MOUNT ASSY.
CABLE MOUNT ASSY.
PAGE 78 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE MOUNT ASSY.
CABLE MOUNT ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
35203
PART NAME
CABLE MOUNT GROUP,6000-6400
PULLY, POINTER ROPE
QTY.
REMARKS
1
1
1
1
2
2
1
2
1
1
1
1
1
540039
544002
125043-3
940674
933241
0948
10136
939654
4514
SHOULDER, ADAPTER
RETAINER, SAW POINTER CABLE
SCREW, HHC M8-1.25 X 30MM GRADE 10.9
WASHER, FLAT SAE 5/16 GRD 9 YZ
WASHER, FLAT SAE 1/4
WASHER, FLAT SAE 3/8
9
SCREW, SHC M12-1.75x30MM 12.9 NP
SCREW, HHC 1/4-20 X 5/8 GR 5
SCREW, HHC 3/8-16 X 2
NUT, NYLOC 3/8-16
MOUNT W/A CABLE GUIDE
10
11
12
13
1665
10133
125043
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 79
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING HARNESS/CIRCUIT BREAKER ASSY.
WIRING HARNESS/CIRCUIT BREAKER ASSY.
PAGE 80 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING HARNESS/CIRCUIT BREAKER ASSY.
WIRING HARNESS/CIRCUIT BREAKER ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
933242
10133
406012
25935
933076
923201
406019
35436
PART NAME
QTY.
REMARKS
WASHER
1
1
1
3
2
2
3
1
NUT, NYLOC 3/8-16
MOUNTING BAR, CIRCUIT BREAKER
NUT, HEX 10-32 W/STAR WASHER
WASHER, FLAT SAE #12 ZINC
SCREW, SHC 1/4-20 X 1/2
CIRCUIT BREAKER, 10 AMP
HARNESS
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 81
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER PUMP KIT ASSY.
WATER PUMP KIT ASSY.
(CUT TO LENGTH)
15
14
13
12
15
1
INLET
(CUT TO LENGTH)
8
7
9
7
8
4
REMOVE PLASTIC SWITCH-BLANK
ON CONTROL PANEL (NEXT TO
WATER VALVE) AND
2
INSTALL SWITCH
5
3
6
11
10
PAGE 82 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER PUMP KIT ASSY.
BELT DRIVE WITH WATER PUMP ASSY.
NO.
1
PART NO.
342000
120089
35116
406000
521006
521016
367021
25931
PART NAME
QTY.
1
REMARKS
JABSCO WATER PUMP
2
BACKING PLATE, WATER PUMP
JACKSHAFT W/A, W/WATER PUMP OPTION
ROCKER SWITCH
AX 35 BELT
AX 43 BELT
16 M NPT HOLLOW HEX PLUG
FITTING, 90 8BARB - 1/2 MP (4390-8-8)
FITTING, PETCOCK RAD DRAIN 1/4MP
SCREW, HHC 3/8-16 X 1 1/4 GR 5
WASHER, FLAT SAE 3/8 GRD 9 YZ
SEAL, WEATHERPACK 16-18 GA, GREEN
CONNECTOR, WEATHERPACK 2 MALE PIN
FITTING, PETCOCK RAD DRAIN 1/4MP
HOSE, #8 LP - 40"
1
3
1
4
1
5
1
6
1
7
1
8
1
9
369970
1023
1
10
11
12
13
14
15
2
933242
12171
2
2
12176
1
12179
2
35080
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 83
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX SEAL KIT ASSY.
GEARBOX SEAL KIT ASSY.
PAGE 84 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX SEAL KIT ASSY.
GEARBOX SEAL KIT ASSY.
NO
1
PART NO
TBD
PART NAME
QTY.
REMARKS
SEAL KIT ...............................................1........................ INCLUDES ITEMS BELOW
576006
925382
480006
480007
578135
SNAP RING, SH-196
SCREW, SHS 1/4-20 X 1/2
SEAL, OIL CR-28655
SEAL, OIL CR-19599
O-RING, SIZE 135, VITON
2
6
1
2
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 85
Download from Www.Somanuals.com. All Manuals Search And Download.
BUSHING EXTENSION KITS ASSEMBLY
BUSHING EXTENSION KITS ASSEMBLY
PAGE 86 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BUSHING EXTENSION KITS ASSEMBLY
BUSHING EXTENSION KITS ASSEMBLY
NO.
PART NO.
926949
180003
582032
90123445
915319
18501
926950
180003
582033
90123445
915319
18502
PART NAME
DOWEL PIN, 3/8" X 2-1/4
COLLAR, OUTER
QD BUSHING, 3/8" - 3/4"
5/8"-11 X 4 LH HEX BOLT
5/8"-11 X 4 RH HEX BOLT
BUSHING EXTENSION KIT (.375" — .75") ............. 1 ........... INCLUDES ITEMS W/
DOWEL PIN, 3/8" X 2-1/2
COLLAR, OUTER
QD BUSHING, 3/4" - 1-1/8
5/8"-11 X 4 LH HEX BOLT
5/8"-11 X 4 RH HEX BOLT
QTY.
REMARKS
1
*
2
*
3
*
4
*
5
*
6
1
1
1
1
1
*
7
8
9
10
11
12
#
#
#
1
1
1
1
1
#
#
BUSHING EXTENSION KIT (.75" — 1.125") ........... 1 ........... INCLUDES ITEMS W/
#
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 87
Download from Www.Somanuals.com. All Manuals Search And Download.
COLLAR/FLANGE PULLER ASSY. (OPTION)
COLLAR/FLANGE PULLER (OPTION)
PAGE 88 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
COLLAR/FLANGE PULLER ASSY. (OPTION)
COLLAR/FLANGE PULLER (OPTION)
NO.
PART NO.
584037
584038
2549
25138
18503
PART NAME
QTY.
REMARKS
1
*
2
*
3
*
4
*
5
OUTER PULLER
1
1
2
1
PLATE, PULLER
SCREW, HHC 1/2"-13 X3
SCREW, HHC 5/8"-11 X5 TAP
COLLAR/FLANGE PULLER ASSY. ... 1 ...............INCLUDES ITEMS W/
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 89
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAL SLEEVE PULLER ASSY. (OPTION)
COLLAR/FLANGE PULLER (OPTION)
PAGE 90 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAL SLEEVE PULLER ASSY. (OPTION)
COLLAR/FLANGE PULLER (OPTION)
NO.
1
2
3
*
4
5
*
6
*
7
*
8
*
9
PART NO.
35163
M18505
35162
584049
35161
937980
35164
PART NAME
QTY.
REMARKS
SCREW, HHC 3/8 – 16 X 4 FULL THREAD
1
SEAL SLEEVE & THRUST WASHER PULLER ASSY........ 1 ........... INCLUDES ITEMS W/
*
SCREW, 10 - 24 X 6 FULL THREAD
SEAL INSTALLATION TOOL
SCREW, 10 - 24 X 12 FULL THREAD
NUT, WELD 10 - 24
SCREW, HHC 1/4 – 20 X 5
SCREW, HHC 1/4 – 20 X 10
TOOL, SEAL REMOVAL
2
1
2
2
3
3
1
35165
584050
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 91
Download from Www.Somanuals.com. All Manuals Search And Download.
TOOLS
TOOLS
2
1
3
PAGE 92 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
TOOLS
TOOLS
NO.
1
PART NO.
584015
584011
15503
PART NAME
QTY.
REMARKS
BLADESHAFT SHIFT WRENCH W/A, 6457
15-16 BLADEWRENCH
1
1
2
2
3
KNOB, COMFORT GRIP
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 93
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS AND CONDITIONS OF SALE — PARTS
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
PAYMENT TERMS
Terms of payment for parts are net 30 days.
FREIGHT POLICY
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
SPECIAL EXPEDITING SERVICE
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
LIMITATIONS OF SELLER’S LIABILITY
MINIMUM ORDER
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
RETURNED GOODS POLICY
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
PRICING AND REBATES
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
PAGE 94 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 95
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS MANUAL
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: [email protected]
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Service Department
Warranty Department
800-421-1244
310-537-3700
Fax: 310-537-4259
Fax: 310-943-2238
800-421-1244
310-537-3700
Fax: 310-537-1173
Technical Assistance
^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668
800-478-1244
MEXICO
UNITED KINGDOM
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: [email protected]
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420 Globe Lane,
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Fax: 0161 339 3226
Dukinfield, Cheshire SK16 4UJ
Contact: [email protected]
CANADA
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: [email protected]
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2010, MULTIQUIP INC.
Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property
of their respective owners and used with permission.
This manual MUST accompany the equipment at all times.This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|